Efficacy of reciprocating and rotary retreatment nickel-titanium file systems for removing filling materials with a complementary cleaning method in oval canals
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Objectives: This study aimed to evaluate and compare the efficacy of the S1 reciprocating system and the D-Race retreatment rotary system for filling material removal and the apical extrusion of debris. Materials and Methods: Sixty-four freshly extracted maxillary canines were shaped with size 10 and size 15 K-files, instrumented using ProTaper Gold under irrigation with 2.5% sodium hypochlorite (NaOCl), obturated according to the principle of thermo-mechanical condensation with gutta-percha and zinc oxide eugenol sealer, and allowed to set for 3 weeks at 37°C. Subsequently, the teeth were divided into a control group (n = 4), the D-Race rotary instrument group (n = 30), and the S1 reciprocating instrument group (n = 30). After classical retreatment, the canals were subjected to a complementary approach with the XP-Endo Shaper. Desocclusol was used as a solvent, and irrigation with 2.5% NaOCl was performed. Each group was divided into subgroups according to the timing of radiographic readings. The images were imported into a software program to measure the remaining filling material, the apical extrusion, and the root canal space. The data were statistically analyzed using the Z-test and JASP graphics software. Results: No significant differences were found between the D-Race and S1 groups for primary retreatment; however, using a complementary cleaning method increased the removal of remnant filling (p < 0.05). Conclusions: Classical removal of canal filling material may not be sufficient for root canal disinfection, although a complementary finishing approach improved the results. Nevertheless, all systems left some debris and caused apical extrusion.
Abstract
Objectives: This study aimed to evaluate and compare the efficacy of the S1 reciprocating system and the D-Race retreatment rotary system for filling material removal and the apical extrusion of debris. Materials and Methods: Sixty-four freshly extracted maxillary canines were shaped with size 10 and size 15 K-files, instrumented using ProTaper Gold under irrigation with 2.5% sodium hypochlorite (NaOCl), obturated according to the principle of thermo-mechanical condensation with gutta-percha and zinc oxide eugenol sealer, and allowed to set for 3 weeks at 37°C. Subsequently, the teeth were divided into a control group (n = 4), the D-Race rotary instrument group (n = 30), and the S1 reciprocating instrument group (n = 30). After classical retreatment, the canals were subjected to a complementary approach with the XP-Endo Shaper. Desocclusol was used as a solvent, and irrigation with 2.5% NaOCl was performed. Each group was divided into subgroups according to the timing of radiographic readings. The images were imported into a software program to measure the remaining filling material, the apical extrusion, and the root canal space. The data were statistically analyzed using the Z-test and JASP graphics software. Results: No significant differences were found between the D-Race and S1 groups for primary retreatment; however, using a complementary cleaning method increased the removal of remnant filling (p < 0.05). Conclusions: Classical removal of canal filling material may not be sufficient for root canal disinfection, although a complementary finishing approach improved the results. Nevertheless, all systems left some debris and caused apical extrusion.
참고문헌 (25)
- Bergenholtz G, "Retreatment of endodontic fillings", Scand J Dent Res, 87, pp.217~224 (1979)
- Ulin C, "Apical periodontitis in root-filled teeth", pp.89~102 (2018), Springer International Publishing
- Pawar AM, "Apical extrusion of debris by supplementary files used for retreatment: an ex vivo comparative study", J Conserv Dent, 19, pp.125~129 (2016)
- Topçuoğlu HS, "Evaluation of debris extruded apically during the removal of root canal filling material using ProTaper, D-Race, and R-Endo rotary nickel-titanium retreatment instruments and hand files", J Endod, 40, pp.2066~2069 (2014)
- Unal GC, "A comparison of the efficacy of conventional and new retreatment instruments to remove gutta-percha in curved root canals: an ex vivo study", Int Endod J, 42, pp.344~350 (2009)
- Akhavan H, "Comparing the efficacy of Mtwo and D-Race retreatment systems in removing residual gutta-percha and sealer in the root canal", Iran Endod J, 7, pp.122~126 (2012)
- Bernardes RA, "Comparison of three retreatment techniques with ultrasonic activation in flattened canals using micro-computed tomography and scanning electron microscopy", Int Endod J, 49, pp.890~897 (2016)
- Marques da Silva B, "Effectiveness of ProTaper, D-Race, and Mtwo retreatment files with and without supplementary instruments in the removal of root canal filling material", Int Endod J, 45, pp.927~932 (2012)
- Rödig T, "Efficacy of D-Race and ProTaper Universal Retreatment NiTi instruments and hand files in removing gutta-percha from curved root canals - a micro-computed tomography study", Int Endod J, 45, pp.580~589 (2012)
- Topçuoğlu HS, "The effects of Mtwo, R-Endo, and D-Race retreatment instruments on the incidence of dentinal defects during the removal of root canal filling material", J Endod, 40, pp.266~270 (2014)
- Rios MA, "Efficacy of 2 reciprocating systems compared with a rotary retreatment system for gutta-percha removal", J Endod, 40, pp.543~546 (2014)
- Rechenberg DK, "Impact of cross-sectional root canal shape on filled canal volume and remaining root filling material after retreatment", Int Endod J, 46, pp.547~555 (2013)
- De-Deus G, "Shaping efficiency as a function of time of a new heat-treated instrument", Int Endod J, 52, pp.337~342 (2019)
- Niemi TK, "Effect of instrument design and access outlines on the removal of root canal obturation materials in oval-shaped canals", J Endod, 42, pp.1550~1554 (2016)
- Gagliardi J, "Evaluation of the shaping characteristics of ProTaper Gold, ProTaper NEXT, and ProTaper Universal in curved canals", J Endod, 41, pp.1718~1724 (2015)
- Taşdemir T, "Efficacy of three rotary NiTi instruments in removing gutta-percha from root canals", Int Endod J, 41, pp.191~196 (2008)
- Zuolo AS, "Efficacy of reciprocating and rotary techniques for removing filling material during root canal retreatment", Int Endod J, 46, pp.947~953 (2013)
- Colombo AP, "Efectiveness of the waveone and ProTaper D systems for removing gutta-percha with or without a solvent", Acta Odontol Latinoam, 29, pp.262~267 (2016)
- Takahashi CM, "In vitro evaluation of the effectiveness of ProTaper Universal rotary retreatment system for gutta-percha removal with or without a solvent", J Endod, 35, pp.1580~1583 (2009)
- Pawar AM, "The efficacy of the Self-Adjusting File versus WaveOne in removal of root filling residue that remains in oval canals after the use of ProTaper retreatment files: a cone-beam computed tomography study", J Conserv Dent, 19, pp.72~76 (2016)
- Borges MM, "Efficacy of reciprocating systems for removing root filling material plus complementary cleaning methods in flattened canals:microtomography and scanning electron microscopy study", Microsc Res Tech, 82, pp.1057~1064 (2019)
- Özyürek T, "Efficacy of ProTaper next and ProTaper Universal retreatment systems in removing gutta-percha in curved root canals during root canal retreatment", J Istanb Univ Fac Dent, 51, pp.7~13 (2017)
- Schropp L, "Accuracy and reliability of intraoral radiographs in determining the cleanliness of root canals after endodontic retreatment", Eur Endod J, 2, pp.1~5 (2020)
- Madarati AA, "The efficacy of retreatment and new reciprocating systems in removing a gutta-percha-based filling material", J Taibah Univ Med Sci, 13, pp.452~458 (2018)
- Machado AG, "Effects of preparation with the Self-Adjusting File, TRUShape and XP-endo Shaper systems, and a supplementary step with XP-endo Finisher R on filling material removal during retreatment of mandibular molar canals", Int Endod J, 52, pp.709~715 (2019)