본문 바로가기
KERD
논문KCI 등재

올인원 접착제의 미세누출에 관한 정량적 분석

A quantitative analysis about microleakage of all-in-one adhesives

신수일|신동훈|강용희
대한치과보존학회 (Korean Academy Of Conservative Dentistry)|2004.01|Restorative Dentistry and Endodontics|제29권 제1호|pp. 66-72

0

조회

0

다운로드

0

인용

0

참고문헌

주제분류치의학

초록

Abstract

All-in-one adhesives were recently developed for reducing the techique sensitivity and chair time, but lots of concerns were made on bondability, longevity, and microleakage. The object of this study was to evaluate microleakage and marginal quality of all-in-one adhesives using electrochemical method and SEM analysis quantitatively. After making Class V cavities, they were bulk filled with Heliomolar(#A1) after surface treatment with three adhesives: Adper Prompt (Group A), One up bond F (Group O), Xeno III (Group X). Electrical conductivity (microamphere, μA) was checked two times: before and after cavity filling. Percentage of leaky margin was estimated from SEM image (x 1,000). The data were statistically analysed: ANOVA and Paired T test for electrical conductivity, Kruskal-Wallis and Mann-Whitney test for marginal quality, Spearman's rho test for checking of relationships between 2 methods The result were as follows: 1. There was no difference in microleakage between adhesive systems and every specimen showed some of microleakage after filling. 2. Microleakage was reduced about 70 % with composite resin filling. 3. Marginal quality was the best in group A, decreasing among groups in the following order: group O, followed by group X. There were significant differences between group A and group X (p=0.015), and between group O and group X (p=0.019). 4. There was no relationship between the microleakage measured by electrochemical method and marginal quality measured by SEM analysis. Within the results of this study, there was no difference in microleakage among groups by electrical conductivity. However, significant difference in marginal quality was seen among groups. It was believed that these dissimilar results might be induced because of their own characteristics. Analysis of microleakage needs various methods for accuracy.

참고문헌 (36)

  1. "Adhesive bonding of various materials to hard tooth tissues Bonding to dentin and fluorapatite improved by the use of a surface-active comonomer", pp.906~911 (1965)
  2. "Dentine permeability and dentine adhesion", 25(5), pp.355~372 (1997)
  3. "Morphological aspects of the resin-dentin interdiffusion zone with different dentin adhesive systems", i(koshi s), pp.1530~1540 (1992)
  4. "Clinical status of ten dentin adhesive systems", pp.1690~1702 (1994)
  5. "Bond strength of a compomer to dentin under various surface conditions", 3(4), pp.175~180 (1999)
  6. "Adhesive bonding of fractured anterior teeth effect of wet technique and rewetting agent", 11(6), pp.251~253 (1998)
  7. "Effect of operator variability on dentin bond strength of two-step bonding systems", 13(2), pp.101~104 (2000)
  8. "Three-dimensional reconstruction of microleakage pattern using a sequential grindingtechnique", pp.370~375 (1994)
  9. "Reducing microleakage in Class II restorations an in vitro study", pp.781~785 (1994)
  10. "Microleakage of four root canal sealer cements as determined by an electrochemical technique", pp.80~88 (1983)
  11. "Interfacial micromorphology of three adhesive systems created in caries-affected dentin", pp.202~206 (2003)
  12. "Enhanced bond strengths of compomers using two dentin bonding systems", pp.325~329 (2002)
  13. "Nanoleakage of dentin adhesive systems bonded to Carisolv-treated dentin", 27(4), pp.387~395 (2002)
  14. "The effect of depth of dentin demineralization on bond strengths and morphology of the hybrid layer", 25(3), pp.186~194 (2000)
  15. "The effect of dentine location and tubule orientation on the bond strengths between resin and dentine", pp.265~274 (1999)
  16. "Resin-infiltrated dentin layer formation of new bonding systems", 23(4), pp.185~194 (1998)
  17. "Complete marginal seal of Class V resin composite restorations effected by increased flexibility", pp.1240~1243 (1990)
  18. "Assessment of microleakage using a conductimetric technique", pp.41~48 (1975)
  19. "The investigation of microleakage in root canal therapy", pp.817~823 (1976)
  20. "Electrochemical microleakage study of endodontic sealer", cements, 1983, 402~407
  21. "A new electrical method for detecting marginal leakage of in vitro resin restorations", 28(4), pp.241~247 (2000)
  22. "Effect of conditioners on dentin permeability using an impedance method", 30(5-6), pp.251~257 (2002)
  23. "A New electrical testing method on marginal leakage of composite resin restorations", 28(4), pp.1183~1198 (1985)
  24. "Comparison and reliability of techniques for measuring leakage and marginal penetration", pp.410~416 (1982)
  25. "The effect of tooth preparation on microleakage behavior", 25(6), pp.526~533 (2000)
  26. "An electrochemical study of the sealing ability of different retrofilling materials", pp.508~511 (1993)
  27. "Evaluation of temporary restorations' microleakage by means of electrochemical impedance measurements", 22(11), pp.586~589 (1996)
  28. "Clinical and semiquantitative marginal analysis of four tooth-coloured inlay systems at 3 years", 23(6), pp.329~338 (1995)
  29. "Marginal quality and microleakage of adhesive class V restorations", 29(2), pp.123~130 (2001)
  30. "Microleakage and adaptation of Class II packable resin-based composites using incremental or bulk filling techniques", 13(4), pp.205~208 (2000)
  31. "Microleakage of adhesive restorative materials", 14(3), pp.170~176 (2001)
  32. "Marginal integrity of large compomer Class II restorations with cervical margins in dentine", pp.399~405 (2000)
  33. "Microleakage of Class 5 composite resin restorations a comparison between in vivo and in vitro", pp.237~245 (1993)
  34. "Comparison of the marginal integrity of in vivo and in vitro Class II composite restorations", pp.158~162 (1993)
  35. "Clinical and laboratory evaluation of adhesive restorative systems", pp.217~219 (1994)
  36. "Gradual increases in marginal leakage of resin composite restorations with thermal stress", pp.1659~1663 (1990)

관련 논문AI추천

단일 단계 접착제의 변연 미세 누출기영재, 김종욱, 박병철, 유상훈, 정진호, 조영곤, 진철희, 최희영대한치과보존학회 · Restorative Dentistry and Endodontics2004 · 제29권 제2호All-in-one adhesive의 다층적용이 미세인장결합강도에 미치는 영향허복, 손성애대한치과보존학회 · Restorative Dentistry and Endodontics2004 · 제29권 제5호상아질 접착제의 미세누출과 변연부 혼화층김영관, 안종모, 조영곤대한치과보존학회 · Restorative Dentistry and Endodontics2002 · 제27권 제1호다양한 복합레진 시스템의 변연 누출도김인수, 민경산, 신동훈대한치과보존학회 · Restorative Dentistry and Endodontics2003 · 제28권 제2호The effect of sealing procedure using all-in-one adhesives on microleakage of pit and fissure sealant김정욱, 김종철, 윤희훈, 이상훈, 이재천, 한세현대한소아치과학회 · 대한소아치과학회지2004 · 제31권 제3호Unground enamel에 대한 all-in-one adhesive의 1회 또는 2회 적용이 미세인장 결합강도에 미치는 영향허복, 김현철, 박정길, 손창용대한치과보존학회 · Restorative Dentistry and Endodontics2006 · 제31권 제6호

이 간행물의 다른 논문 (8건)

5급 와동에서의 수종 접착 시스템의 결합강도에 관한 비교연구최경규, 권정미, 박상진pp. 1-12Regional bond strength of dentin bonding systems to pulp chamber dentin최기운, 최경규, 이상혁pp. 13-22Tissue reactions to implanted intracanal medicaments I in rats김원경, 김미리, 김병현pp. 23-29Comparison of shear bond strength of different bonding systems on bleached enamel김광근, 박정원pp. 30-35수복재에 함유된 불소가 치질의 미세경도와 불소 함유량에 미치는 영향조영곤, 이수종, 박병철, 김종욱pp. 36-43
원문 보기