본문 바로가기
KERD
논문KCI 등재

단일 단계 접착제의 변연 미세 누출

Marginal microleakage of single step adhesives

최희영|박병철|정진호|유상훈|김종욱|진철희|기영재|조영곤
대한치과보존학회 (Korean Academy Of Conservative Dentistry)|2004.03|Restorative Dentistry and Endodontics|제29권 제2호|pp. 162-169

0

조회

0

다운로드

0

인용

0

참고문헌

주제분류치의학

초록

Abstract

This study evaluated the marginal microleakage of five single step adhesives. Class V cavity preparations with occlusal margins in enamel and gingival margins in dentin were prepared on both buccal and lingual surfaces of extracted human molar teeth. Prepared teeth were randomly divided into five groups and restored using one of the single step adhesives and composite resins: Prompt L-Pop/Filtek Z-250 (Group 1), AQ Bond/Metafil CX (Group 2), One-Up Bond F/Palfique Toughwell (Group 3), Futurabond/Admira (Group 4), Xeno III/Spectrum TPH (Group 5). The restored teeth were thermocycled. Microleakage was assessed by dye penetration using 2% methylene blue dye solution. The teeth were bisected buccolingually and evaluated for microleakage under steromicroscope. The data were statistically analysed by Kruskal-Wallis test and Mann-Whitney tests. The results of this study were as follows; 1. Microleakage of enamel margins in group 3 was statistically higher than that in groups 1, 2, 4, 5 (p < 0.05). 2. Microleakage of dentin margins in group 1 was statistically higher than that in groups 2, 5, and that in group 3 was statistically higher than that in groups 2, 4, 5 (p < 0.05). 3. Dentin marginal microleakage was higher than enamel marginal microleakage in all experimental groups. In conclusion, Prompt L-Pop showed the least leakage at enamel margin, and AQ Bond showed at dentin margin in this study. Marginal miroleakage in dentin was higher than that in enamel.

참고문헌 (43)

  1. "Microleakage of hydrophilic adhesive systems in class V composite restorations.", 14, pp.31~33 (2001)
  2. "Microleakage of adhesive restorative materials", 14, pp.170~176 (2001)
  3. "Quantititive evaluation of marginal leakage of two resin composite restorations using two filling techniques", 27, pp.475~479 (2002)
  4. "Evaluation of microleakage using different bonding agents", 28, pp.582~586
  5. "Effect of air abrasion and resin composite on microleakage of class V restorations bonded with self-etching primers", 3, pp.265~272 (2001)
  6. "No-bottlevs multi-bottledentin adhesive-a microtensile bond strength and morphological study", 17, pp.373~380 (2001)
  7. "Adhesion mechanism of self-etching adhesives", pp.131~148 (1999)
  8. "Adhesion to enamel and dentin", 28, pp.215~235 (2003)
  9. "Viscoelastic properties of demineralized human dentin measured in water with an atomic force microscope (AFM) based indentation", 40, pp.539~544 (1998)
  10. "Dentin permeability and adhesion", 25, pp.355~372 (1997)
  11. "Aggressiveness of contemporary self-etching systems. I: Depth of penetration beyond dentin smear layers.", 17, pp.296~308 (2001)
  12. "Evaluation of adhesive systems usingacidic primers", 10, pp.219~223 (1997)
  13. "Enamel and dentin bond strengths of single application bonding systems", 14, pp.361~366 (2001)
  14. "The clinical performance of adhesives", 26, pp.120~ (1998)
  15. "Fatigue behaviour of different dentin adhesives", 14, pp.329~338 (1999)
  16. "Marginal integrity and postoperative sensitivity in class 2 resin composite restorations in vivo", 26, pp.555~562 (1998)
  17. "SEM study of a self-etching primer adhesive system used for dentin bonding in primary and permanent teeth", 23, pp.315~320 (2001)
  18. "Bonding to intact dentin", 75, pp.1706~1715
  19. "Self-contamination of deep dentin by dentinal fluid", 13, pp.195~200 (2000)
  20. "One-year clinical performance of a self-etchingadhesive in class V resin composites cured by two methods", 27, pp.218~222 (2002)
  21. "Self-etching adhesive system for resin bonding", pp.176~181 (2000)
  22. "New trends in dentin", enamal adhesion, 2000, pp.13, 25~30
  23. "Pulpal response to a fluoride-releasing all-in-one resin bonding system", 27, pp.271~277 (2002)
  24. "Fuchigami S, Oguri M: Dental composition", pp.177~ (1998)
  25. "The influence of the organic matrix on demineralization of bovine root dentin in vitro", 73, pp.1523~1529 (1994)
  26. "The effect of an experimental one-application self-conditioning adhesives on microleakage", 78(306) (1999)
  27. "Bond strengths of nonrinsing adhesives", 31, pp.353~358 (2000)
  28. "The effect of load cycling on the nanoleakage of dentin bonding systems", 18(2), pp.111~119 (2002)
  29. "Effect of bulk insertion, prepolymerized resin composite restorations", pp.253~258 (1996)
  30. "The compositon between the composite-dentin bond strength and the polymerization contraction stress", 63, pp.1396~1399 (1984)
  31. "Physical properties and gap formation of light-cured composites with and without:softstart polymerization", 25, pp.321~330 (1997)
  32. "The effect of flowable resin composite on microleakage in class V cavities", 28, pp.42~46 (2003)
  33. "Sealing ability of new generation adhesive-restorative materials placed on vital teeth", 15, pp.117~128 (2002)
  34. "Influence of curing methods and materials on the marginal seal of class V composite restorations in vitro", 28(2), pp.160~167 (2003)
  35. "Microleakage of new all-in-one adhesive systems on dentinal and enamel margins", 33, pp.136~139 (2002)
  36. "Microleakage in facial and lingual class 5 composite restorations", pp.133~137 (1994)
  37. "Effect of dentin adhesives on the enamel-dentin", composite interfacial microleakage, 142001, pp.14, 344~348
  38. "Effect of delayed activation of light-cured resin composite on bonding of all-in-one adhesives", 3, pp.207~225 (2001)
  39. "Investigation of self-etching dentin primers", pp.408~410
  40. "Shear bond strength of a new one-bottle dentin adhesive", 4, pp.184~188 (1997)
  41. "Microleakage of self-etching primers after thermal and flexural load cycling", 14, pp.163~169 (2001)
  42. "Microleakage of light-cured resin and resin-modified glass-ionomer dentin bonding agents applied with co-cure vs pre-curetechnique", 25, pp.292~298 (2000)
  43. "Effect of composite resin placement techniques on the microleakage of two self-etching dentin-bonding agents", 14, pp.132~136 (2001)

관련 논문AI추천

올인원 접착제의 미세누출에 관한 정량적 분석강용희, 신동훈, 신수일대한치과보존학회 · Restorative Dentistry and Endodontics2004 · 제29권 제1호상아질 접착제의 미세누출과 변연부 혼화층김영관, 안종모, 조영곤대한치과보존학회 · Restorative Dentistry and Endodontics2002 · 제27권 제1호자가 산부식 프라이머와 자가 산부식 접착제의 변연 미세누출조공철, 조영곤대한치과보존학회 · Restorative Dentistry and Endodontics2002 · 제27권 제5호다양한 복합레진 시스템의 변연 누출도김인수, 민경산, 신동훈대한치과보존학회 · Restorative Dentistry and Endodontics2003 · 제28권 제2호도말층 존재 유무에 따른 One-step 접착 시스템의 미세인장결합강도권수미, 송용범, 이광원, 이세준, 진정희대한치과보존학회 · Restorative Dentistry and Endodontics2002 · 제27권 제3호IRM 임시수복이 상아질 접착제의 변연 미세누출에 미치는 영향김현경, 이영곤, 조영곤대한치과보존학회 · Restorative Dentistry and Endodontics2003 · 제28권 제1호

이 간행물의 다른 논문 (7건)

수동과 엔진구동형 기구를 이용한 난원형 근관의 형성에 관한 주사전자현미경적 관찰송욱, 허복, 이희주pp. 141-146근관의 치경부 조기 확대가 치근단 잔사 정출에 미치는 효과김민경, 민정범, 황호길pp. 147-152상아질에 적용된 재 습윤제가 미세인장 결합강도에 미치는 영향박병철, 유상훈, 진철희, 기영재, 강희영, 최희영, 조영곤, 김종욱pp. 153-161The effect of cavity wall property on the shear bond strength test using iris method백승호, 손호현, 권혁춘, 유현미, 배지현, 엄정문, 김동환, 조병훈, 이인복pp. 170-176Influence of the curing time for the adhesive on the oxygen-inhibited layer thickness and the shear bond strength to dentin배지현, 조병훈, 손호현, 김오영, 이인복, 김창근, 백승호, 엄정문, 최용훈pp. 177-184
원문 보기