본문 바로가기
KERD
논문KCI 등재

All-in-one adhesive의 다층적용이 미세인장결합강도에 미치는 영향

The effect of multiple application on microteensile bond strength of all-in one dentin adhesive systems

허복|손성애
대한치과보존학회 (Korean Academy Of Conservative Dentistry)|2004.09|Restorative Dentistry and Endodontics|제29권 제5호|pp. 423-429

1

조회

0

다운로드

1

인용

0

참고문헌

주제분류치의학

초록

Abstract

The purpose of this study was to evaluate the effect of multiple application of all-in-one dentin adhesive system on microtensile bond strength using confocal laser scanning microscope and microtensile bond strength test. Flat occlusal dentin surfaces were prepared using low-speed diamond saw. In group I, Scotchbond Multipurpose (SM) was applied by manufacturer's recommendation. In group II, after Adper Prompt L-Pop was applied for 15s and light cured for 10s, the second coat was re-applied and light-cured. In group III, after light-curing the second layer, the third coat was re-applied and light-cured. Specimens bonded with a resin-composite were sectioned into resin-dentin stick for measuring the adhesive layer thickness by confocal laser scanning microscope and evaluating micro-tensile bond strength. The adhesive layers of three-step dentin adhesive system, 3 coats of Adper Prompt L-Pop had significantly thicker than SM, 2 coats of Adper Prompt L-Pop (p < 0.05). However, there was no significant differences in bond strengths between SM and 3 coats of Adper Prompt L-Pop (p > 0.05). And SM, 3 coats of Adper Prompt L-Pop had significantly higher than 2 coats of Adper Prompt L-Pop in bond strengths (p < 0.05).

참고문헌 (43)

  1. "A Simple method of increasing the adhesion of acrylic filling materials to enamel surfaces", 34, pp.849~853 (1955)
  2. "Fatigue behaviour of different dentin adhesives", 3, pp.11~17 (1999)
  3. "Micromorphological spectrum of acid-conditioned dentin following the application of a water-based adhesive", 14, pp.329~338 (1998)
  4. "Clinical considerations for optimal dentinal bonding", 27, pp.619~625 (1996)
  5. "Resin reinforced dentin due to infiltration of monomers into the dentin adhesive interface", 1, pp.78~81 (1982)
  6. "Dentin bonding--questions for the new millennium", 1, pp.191~209 (1999)
  7. "Moist versus dry dentin:its effect on shear bond strength", pp.127~129
  8. "Resin bonding to wet substrate Bonding to dentin", pp.39~41 (1992)
  9. "Effect of resin primer solvents and surface wetness on resin composite bond strength to dentin", 5, pp.213~215 (1992)
  10. "Microtensile bond strengths of seven dentin adhesive systems", 16, pp.180~187 (2000)
  11. "Dentin bond strength after air drying and rewetting", 7, pp.144~148 (1994)
  12. "Effects of one versus two applications of an unfilled all-in-one adhesive on dentine bonding", 30, pp.83~90 (2002)
  13. "Technique sensitivity of dentin bonding:effect of application mistakes on bond strength and marginal adaptation", 25, pp.324~330 (2000)
  14. "Lopes M"No-bottle" vs "multi-bottle" dentin adhesives--a microtensile bond strength and morphological study", 17, pp.373~380 (2001)
  15. "Bond strengths of nonrinsing adhesives", 31, pp.353~358 (2000)
  16. "Marginal adaptation of compomer Class V restorations in vitro", 1, pp.143~151 (1999)
  17. "Dentin bond strength and marginal adaption after NaOCl pre-treatment", 25, pp.40~45 (2000)
  18. "Shear bond strengths of one-bottle dentin adhesives using multiple applications", 22, pp.194~1999 (1997)
  19. "Bonding efficiency of single-bottle enamel", dentin adhesives, 121999, pp.12, 277~282
  20. "Bond strength of composite to dentin using conventionalone-step, and self-etching adhesive systems", 29, pp.55~61 (2001)
  21. "The effect of double adhesive application on the shear bond strength to dentin of compomers using three one-bottle adhesive systems", 26, pp.313~317 (2001)
  22. "The effects of adhesive thickness on polymerization contraction stress of composite", 79, pp.812~817 (2000)
  23. "Influence of dentinal fluid and stress on marginal adaptation of resin composites", 72, pp.490~494 (1993)
  24. "Adhesion and its application with restorative materials", 37, pp.329~340 (1993)
  25. "Setting stress in composite resin in relation to configuration of the restoration", 66, pp.1636~1639 (1987)
  26. "Stiffness increase during the setting of dental composite resins", pp.1713~1716
  27. "The competition between the composite-dentin bond strength and the polymerization contraction stress", 63, pp.1396~1399 (1984)
  28. "Complete marginal seal of Class V resin composite restorations effected by increased flexibility", pp.1240~1243
  29. "Relationship between adhesive thickness and microtensile bond strength", 26(1), pp.97~104 (2001)
  30. "Do dentin bond strength tests serve a useful purpose", 1, pp.57~67 (1999)
  31. "Assessment by nano-indentation of the hardness and elasticity of the resin-dentin bonding area", 72, pp.1434~1442 (1993)
  32. "Marginal integrity related to bond strength and strain capacity of composite resin restorative systems", pp.658~664
  33. "The effect of air thinning on dentin adhesive bond strength", 20, pp.133~137 (1995)
  34. "Effect of the adhesive layer thickness on the fracture toughness of dental adhesive resins", 19, pp.153~163 (2000)
  35. "Relationship between adhesive thickness and microtensile bond strength", 26, pp.97~104 (2001)
  36. "Technique sensitivity of dentin bonding:effect of application mistakes on bond strength and marginal adaptation", 25, pp.324~330 (2000)
  37. "Clinical considerations for optimal dentinal bonding", pp.619~625 (1996)
  38. "Release of formaldehyde from dental composites", 67, pp.1289~1294 (1988)
  39. "Unpolymerized surface layers on sealants", 39, pp.27~32 (1981)
  40. "Heat of polymerization of dimethacrylate monomers investigated by isothermal DSC measurement", pp.85~92
  41. "The effect of oxygen inhibition on an unfilled", filled composite system, 691990, 1652~1658
  42. "The interaction of adhesive systems with human dentin", 9, pp.167~173 (1996)
  43. "Some bonding characteristics of a HEMA", maleic acid adhesion promoter, 1671989, 308~311

관련 논문AI추천

Unground enamel에 대한 all-in-one adhesive의 1회 또는 2회 적용이 미세인장 결합강도에 미치는 영향허복, 김현철, 박정길, 손창용대한치과보존학회 · Restorative Dentistry and Endodontics2006 · 제31권 제6호도말층 존재 유무에 따른 One-step 접착 시스템의 미세인장결합강도권수미, 송용범, 이광원, 이세준, 진정희대한치과보존학회 · Restorative Dentistry and Endodontics2002 · 제27권 제3호상아질 접착제의 성상이 미세인장결합강도에 미치는 영향허복, 김현진, 김현철대한치과보존학회 · Restorative Dentistry and Endodontics2004 · 제29권 제3호접착레진의 추가도포가 자가부식형 접착제의 상아질에 대한 미세인장접착강도에 미치는 영향손호현, 엄정문, 정문경, 정세준, 조병훈, 한영철대한치과보존학회 · Restorative Dentistry and Endodontics2006 · 제31권 제2호중간층 레진 적용이 단일 접착과정 상아질 접착제의 접착에 미치는 영향박상진, 박상혁, 최경규, 최승모대한치과보존학회 · Restorative Dentistry and Endodontics2007 · 제32권 제4호혼성층의 두께가 three-step과 self-etching 상아질 접착제의 미세인장결합강도에 미치는 효과허복, 박정길, 이혜정대한치과보존학회 · Restorative Dentistry and Endodontics2003 · 제28권 제6호

이 간행물의 다른 논문 (8건)

3차원 재구성법을 이용한 수복물의 정량적 미세누출도 측정신동훈, 하상윤pp. 413-422자가 산부식 프라이머의 적용시간이 상아질의 미세인장 결합강도에 미치는 영향김종진, 최희영, 김종욱, 조영곤, 진철희, 이영곤, 유상훈, 박병철pp. 430-438Influence of plugger penetration depth on the apical extrusion of root canal sealer in continuous wave of condensation technique김성교, 김광근, 김기옥, 김영경, 이영미, 소호영pp. 439-445네 가지 전동 Ni-Ti 파일의 danger zone에서의 근관성 형력김기옥, 최석동, 김성교pp. 446-453유기산 완충용액의 포화도가 상아질의 탈회에 미치는 영향강혜실, 이찬영pp. 454-461
원문 보기