Development of a safe operation capability chart as the design basis of a rudder area
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Ship owners now demand a new design approach for the rudder that considers detailed design information such as maneuverability and environmental loads etc. on a quantified basis. In this paper, we developed the concept of a safe operation capability chart for the design of a rudder area. The chart can be used as the basis of design considering the maneuverability and environmental loads. To confirm the applicability of the safe operation capability chart for use as the basis of design, four different rudders are assumed in this work. First, it is determined whether or not it is appropriate to design a rudder by applying a conventional design approach based on IMO maneuvering tests. The proposed concept is reviewed for use as the basis of the design by investigating the effect of rudder area on capability charts that are plotted according to the rudder under various environmental conditions.
Abstract
Ship owners now demand a new design approach for the rudder that considers detailed design information such as maneuverability and environmental loads etc. on a quantified basis. In this paper, we developed the concept of a safe operation capability chart for the design of a rudder area. The chart can be used as the basis of design considering the maneuverability and environmental loads. To confirm the applicability of the safe operation capability chart for use as the basis of design, four different rudders are assumed in this work. First, it is determined whether or not it is appropriate to design a rudder by applying a conventional design approach based on IMO maneuvering tests. The proposed concept is reviewed for use as the basis of the design by investigating the effect of rudder area on capability charts that are plotted according to the rudder under various environmental conditions.
참고문헌 (29)
- The Maritime Turbulent Wind Field. Measurements and Models. Final Report for Task 4 of the Statoil Joint Industry Project, "Andersen, O.J.", Norwegian Institute of Science and Technology, ~ (1992)
- Bhattacharyya, R., "Dynamics of Marine Vehicles" (1978), Wiley
- DET NORSKE VERITAS (DNV), "Recommended Practice DNV-RPH103 (Modelling and Analyses of Marine Operation)", ~ (2011)
- Fujii, J., "Experimental researchs on rudder performance (2)", J. Soc. Nav. Archit. Jpn., pp.110~ (1961)
- Fujii, J., "Experimental researchs on rudder performance (3)", J. Soc. Nav. Archit. Jpn., pp.111~ (1962)
- Fujiwara, T., "An estimation method of wind forces and moments acting on ships", Mini Symposium on Prediction of Ship Manoeuvring Performance (2001)
- Germanischer Lloyd (GL), "Ship Technology - PART1 Seagoing Ships - Chapter 1 Hull Structure e Section 14 Rudder and Manoeuvring Arrangement", Germanischer Lloyd (GL), ~ (2013)
- GL Noble Denton, "Techniocal Policy Board Guidelines for Marine Transportations 0030", ND, 2010
- Hasegawa, K., "Automatic colli-sion avoidance system for ships using fuzzy control", J. Kansai Soc. Nav. Archit., 205, pp.1~10 (1987)
- Hendzik, J., "Evaluating criteria for DP vessels", J. KONES Powertrain Transp., 20(4), pp.118~122 (2013)
- Hwang, W., "Application of System Identification to Ship Maneuvering", pp.1980
- IACS, "IACS Requirements v.1.1. S10", ~ (1990)
- IMO, "MSC. 137(76) Standards for Ship Manoeuvrability", ~ (2002)
- International Organization for Standardization (ISO), "15016, Ships and Marine Technology e Guidelines for the Assessment of Speed and Power Performance by Analysis of Speed Trial Data", ~ (2015)
- International towing tank Conference (ITTC), "Prediction of Power Increase in Irregular Waves from Model Test. ITTC - Recommended Procedure 7.5-02-07-02.2", ~ (2011)
- 정노택, "IMO의 선박기인 CO2 배출 규제 동향 및 고찰", 한국해양환경•에너지학회지, 14(1), pp.65~71 (2011), 한국해양환경·에너지학회
- Kijima, K., "Prediciton method of ship manoeuvrability in deep and shallow water", MARSIM ICSM (1990)
- Kim, H.S., "Computerized measurement system of ship speed and maneuvering performance in sea trial", J. Soc. Nav. Archit. Korea, 38(3), pp.54~61 (2001)
- 김연규, "쌍축 컨테이너선의 조종성능 특성 연구", 대한조선학회 논문집, 43(1), pp.731~737 (2006), 대한조선학회
- 김연규, "CPMC 구속모형시험에 의한 KCS 선형의 조종성능 추정", 대한조선학회 논문집, 46(6), pp.553~561 (2009), 대한조선학회
- Papanikolaou, A., "Criteria for minimum powering and maneuverability in adverse weather conditions", The 14th International Ship Stability Workshop (ISSW) (2014)
- Papanikolaou, A., "Energy efficient safe ship operation (SHOPERA), Influence of EEDI on Ship Design", ~
- Prpic-Orsic, J., "The influence of route choice and operating conditions on fuel consumption and CO2 emission of ships", J. Mar. Sci. Technol., 21, pp.434~457 (2016)[DOI]
- 성영재, "가상 구속모형시험을 이용한 선박 조종성능 평가", 대한조선학회 논문집, 52(5), pp.407~417 (2015), 대한조선학회
- Sutulo, S., "Preliminary Analysis of Ship Manoeuvrability Criteria in Wind" (2015)
- Sutulo, S., "Analysis of Manoeuvrability Criteria and Standards in View of Environmental Factors and EEDI Impact" (2016)
- You, Y., "A simplified maneuvering performance of a large container ship passing through the Suez canal", 4th International Conference on Ship Manoeuvring in Shallow and Confined Water with Special Focus on Ship Bottom Interaction (MASHCON) (2016)
- You, Y., "Development of the collision ratio to infer the time at which to begin a collision avoidance of a ship", Appl. Ocean Res., 60, pp.164~175 (2016)[DOI]
- 유영준, "선박의 조종특성을 고려한 운항안전성능의 수치화 방법에 관한 연구", 대한조선학회 논문집, 54(2), pp.113~124 (2017), 대한조선학회[DOI]