본문 바로가기
KERD
논문KCI 등재

Dominant components of vibrational energy flow in stiffened panels analysed by the structural intensity technique

2

조회

0

다운로드

1

인용

0

참고문헌

키워드

주제분류조선공학

초록

Stiffened panels are widely used in naval architecture and ocean engineering, and knowledge about their dynamic behaviour represents important issue in the design procedure. Ordinary vibration analysis consists of natural frequencies and mode shapes determination and can be extended to forced response assessment, while the Structural Intensity (SI) analysis, assessing magnitude and direction of vibrational energy flow provides information on dominant transmission paths and energy distribution including sink positions. In this paper, vibrational energy flow in stiffened panels under harmonic loading is analyzed by the SI technique employing the finite element method. Structural intensity formulation for plate and beam element is outlined, and developed system combining in-house code and general finite element tool is described. As confirmed within numerical examples, the developed tool enables separation of SI components, enabling generation of novel SI patterns and providing deeper insight in the vibrational energy flow in stiffened panels, comparing to existing works.

Abstract

Stiffened panels are widely used in naval architecture and ocean engineering, and knowledge about their dynamic behaviour represents important issue in the design procedure. Ordinary vibration analysis consists of natural frequencies and mode shapes determination and can be extended to forced response assessment, while the Structural Intensity (SI) analysis, assessing magnitude and direction of vibrational energy flow provides information on dominant transmission paths and energy distribution including sink positions. In this paper, vibrational energy flow in stiffened panels under harmonic loading is analyzed by the SI technique employing the finite element method. Structural intensity formulation for plate and beam element is outlined, and developed system combining in-house code and general finite element tool is described. As confirmed within numerical examples, the developed tool enables separation of SI components, enabling generation of novel SI patterns and providing deeper insight in the vibrational energy flow in stiffened panels, comparing to existing works.

참고문헌 (31)

  1. Chen, Y., "Vibration behaviours of a boxtype structure built up by plates and energy transmission through the structure", J. Sound Vib., 331, pp.849~867 (2012)[DOI]
  2. Cho, D.S., "Structural intensity analysis of stiffened plate using assumed mode method", J. Soc. Nav. Arch. Korea, 35(4), pp.76~86 (1998)
  3. 조대승, "집중 부가물이 보강판의 진동파워 흐름에 미치는 영향에 대한 수치 해석적 고찰", 대한조선학회 논문집, 40(1), pp.5~46 (2003), 대한조선학회
  4. 조대승, "Numerical procedure for the vibration analysis of arbitrarily constrained stiffened panels with openings", International Journal of Naval Architecture and Ocean Engineering, 6(4), pp.763~774 (2014), 대한조선학회
  5. Cho, D.S., "Natural vibration analysis of rectangular bottom plate structures in contact with fluid", Ocean Eng., 103, pp.171~179 (2015)[DOI]
  6. Cho, D.S., "Forced vibration analysis of arbitrarily constrained rectangular plates and stiffened panels using the assumed mode method", Thin-Walled Struct, 90, pp.182~190 (2015)[DOI]
  7. Cho, D.S., "Structural intensity analysis of stepped thickness rectangular plates utilizing the finite element method", Thin-Walled Struct, 109, pp.1~12 (2016)[DOI]
  8. Eck, T., "Measurement of vibrational energy flow in a plate with high energy flow boundary crossing using electronic speckle pattern interferometry", Appl. Acoust, 73, pp.936~951 (2012)[DOI]
  9. Gavric, L., "A finite element method for computation of structural intensity by the normal mode approach", J. Sound Vib., 164, pp.29~43 (1993)[DOI]
  10. Hambric, S.A., "Power flow and mechanical intensity calculations in structural finite element analysis", J. Vib. Acoust., 112, pp.542~549 (1990)[DOI]
  11. Hambric, S.A., "Prediction of structural intensity fields using solid finite element", Noise Control Eng. J., 47, pp.209~217 (1999)[DOI]
  12. Khun, M.S., "Structural intensity in plates with multiple discrete and distributed spring-dashpot systems", J. Sound Vib., 276, pp.627~648 (2004)[DOI]
  13. Lee, H.P., "Diversion of energy flow near crack tips of a vibrating plate using the structural intensity technique", J. Sound Vib., 296, pp.602~622 (2006)[DOI]
  14. Liu, Z.S., "Structural intensity study of plates under lowvelocity impact", Int. J. Impact Eng., 31, pp.957~975 (2005)[DOI]
  15. Patran-PAT304 (PCL and Customization), "MSC", pp.2010, MSC Software
  16. MSC Software, "MD Nastran 2010 Dynamic Analysis User's Guide" (2010)
  17. Navazi, H.M., "Experimental measurement of energy density in a vibrating plate and comparison with energy finite element analysis", J. Sound Vib., 375, pp.289~307 (2016)[DOI]
  18. Noiseux, D.U., "Measurement of power flow in uniform beams and plates", J. Acoust. Soc. Am., 47, pp.238~247 (1970)[DOI]
  19. Pavic, G., "Measurement of structure borne wave intensity, Part I: formulation of the methods", J. Sound Vib., 49, pp.221~230 (1976)[DOI]
  20. Pavic, G., "Structural surface intensity: an alternative approach in vibration analysis and diagnosis", J. Sound Vib., 115, pp.405~422 (1987)[DOI]
  21. Park, Y.H., "Vibrational power flow models for transversely vibrating finite Mindlin plate", J. Sound Vib., 317, pp.800~840 (2008)[DOI]
  22. Pascal, J.C., "Characterisation of a dissipative assembly using structural intensity measurements and energy conservation equation", Mech. Syst. Signal Process., 20, pp.1300~1311 (2006)[DOI]
  23. Petrone, G., "Numerical and experimental investigations on structural intensity in plates", Compos. Struct., 140, pp.94~105 (2016)[DOI]
  24. Saijyou, K., "Measurement of structural and acoustic intensities using near-field acoustical holography", Jpn. J. Appl. Phys., 35, pp.3167~3174 (1996)[DOI]
  25. Tian, X., "Crack detection in offshore platform based on structural intensity approach", J. Sound Vib., 389, pp.236~249 (2017)[DOI]
  26. Tran, T.Q.N., "Structural intensity analysis of thin laminated composite plates subjected to thermally induced vibration", Compos. Struct., 78, pp.70~83 (2007)[DOI]
  27. Troitsky, M.S., "Stiffened Plates: Bending, Stability and Vibrations" (1976), Elsevier Scientific Publishing Company
  28. Verheij, J.W., "Cross spectral density methods for measuring structure borne power flow on beams and pipes", J. Sound Vib., 70, pp.133~139 (1980)[DOI]
  29. Xu, X.D., "The structural intensities of composite plates with a hole", Compos. Struct., 65, pp.493~498 (2004)[DOI]
  30. Xu, X.D., "Numerical study on energy transmission for rotating hard disk systems by structural intensity technique", Int. J. Mech. Sci., 46, pp.639~652 (2004)[DOI]
  31. Xu, X.D., "The energy flow analysis in stiffened plates of marine structures", Thin-Walled Struct, 42, pp.979~994 (2004)[DOI]

관련 논문AI추천

이 간행물의 다른 논문 (9건)