레진코팅된 상아질 표면과 레진인레이간 결합에 임시가봉재가 미치는 영향
THE EFFECT OF TEMPORARY FILLING MATERIALS ON THE ADHESION BETWEEN DENTIN ADHESIVE-COATED SURFACE AND RESIN INLAY
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
The purpose of this research was to compare the microtensile bond strength of resin coated surface and resin inlay according temporary filling materials prior to applying self-adhesive resin cement. Caviton(GC, Japan), Provifil(Promedica, Neumunster, Germany), Provifil Promedica, Neumunster, Germany) & petrolatum, and Eugenol-based cement, Tembond(Kerr, Orange CA, USA) were used as temporary filling materials. After fabrication of Tescera(Bisco, Schamburg IL, USA), it was bonded with a self-adhesive resin cement, Rely X unicem(3M, St. Paul. Minn, USA). After this procedure, the microtensile bond strength was measured and it was analyzed through one-way ANOVA and Duncan test(p<0.05). Caviton(GC, Tokyo, Japan) showed statistical difference except for the control(group Ⅰ) and the saliva(group Ⅱ)(p<0.05). Provifil(group Ⅳ), Provifil & petroneum(group Ⅴ), Tembond(group Ⅵ) had lower microtensile bond strength.
Abstract
The purpose of this research was to compare the microtensile bond strength of resin coated surface and resin inlay according temporary filling materials prior to applying self-adhesive resin cement. Caviton(GC, Japan), Provifil(Promedica, Neumunster, Germany), Provifil Promedica, Neumunster, Germany) & petrolatum, and Eugenol-based cement, Tembond(Kerr, Orange CA, USA) were used as temporary filling materials. After fabrication of Tescera(Bisco, Schamburg IL, USA), it was bonded with a self-adhesive resin cement, Rely X unicem(3M, St. Paul. Minn, USA). After this procedure, the microtensile bond strength was measured and it was analyzed through one-way ANOVA and Duncan test(p<0.05). Caviton(GC, Tokyo, Japan) showed statistical difference except for the control(group Ⅰ) and the saliva(group Ⅱ)(p<0.05). Provifil(group Ⅳ), Provifil & petroneum(group Ⅴ), Tembond(group Ⅵ) had lower microtensile bond strength.
참고문헌 (23)
- Peters MC, "Minimally invasive operative care. Ⅰ. Minimally intervention and concepts for minimally invasive cavity preparations", J Adhes Dent, 3, pp.7~16 (2001)
- Burrow MF, "Early bonding of resin cements to dentin-effect of bonding environment", Oper Dent, 21, pp.196~202 (1996)
- Nikaido T, "The resin-coating technique. Effect of a single-step bonding system on dentin bond stregths Jpn", Adhes Dent, 5, pp.292~300 (2003)
- Satoh M, "How to use Liner Bond System as a dentin and pulp protector in indirect restorations", J Jpn Adhes Dent, 12, pp.41~47 (1994)
- Christensen GJ, "Resin cements and postoperative sensitivity", J Am Dent Assoc, 131, pp.1197~1199 (2000)
- Okuda M, "Microtensile bond strengths to cavity floor dentin in indirect composite restorations using resin coating", J Esthet Restor Dent, 19, pp.38~48 (2007)
- Catherine C, "Shear bond strength of different types of luting cements to an aluminum oxide reinforced glass ceramic core material", Dental Materials, 20(10), pp.794~803 (2004)
- Kurosaki N, "The effect of etching on the dentin of the clinical cavity floor", Quintessence int, 21, pp.87~92 (1990)
- Nikaido T, "Evaluation of thermal cycling and mechanical loading on bond strength of a self-etching primer system to dentin", Dental Materials, 18(3), pp.269~275 (2000)
- 김도완, "자가부식형 상아질접착제와 레진시멘트와의 적합성에 관한 연구", 대한치과보존학회지, 30(6), pp.493~504 (2005), 대한치과보존학회
- Cadigiaco MC, "Dentin contamination protection after mechanical preparation for veneering", Am J Dent, 9, pp.57~60 (1996)
- Satoh M, "How to use Liner Bond System as a dentin and pulp protector in indirect restorations", J Jpn Adhes Dent, 12, pp.41~47 (1994)
- Nikaido T, "The Resin-coating technique", J Adhes Dent, 5, pp.293~300 (2003)
- De Goes MF, "Early bond strengths of dual-cured resin cement to resincoated dentin", J Dent Res, 79, pp.453~ (2000)
- Oswaldo S, "Marginal adaptation and microtensile bond strength of composite indirect restorations bonded to dentin treated with adhesive and low-viscosity composite", Dental Materials, 23, pp.279~287 (2007)
- Jayasooriya PR, "The effect of a“ Resin Coating”on the interfacial adaptation of composite inlays", Operative Dentistry, 28, pp.28~35 (2003)
- Kumbuloglu O, "A study of the physical and chemical properties of four resin composite luting cements", Int J Prosthodont, 17(3), pp.357~363 (2004)
- Sattabanasuk V, "Effects of saliva contamination on dentin bond strength using all-in-one adhesives", J Adhes Dent, 8, pp.311~318 (2006)
- Ganss C, "Effect of eugenol-containing temporary cements of bond strength of composite to dentin", Oper Dent, 23, pp.55~62 (1998)
- Leirskar J, "The effect of zinc oxide-eugenol on the shear bond strength of a commonly used bonding system", Endo Dent Traumatol, 16, pp.265~268 (2000)
- al-Wazzan KA, "The effect of eugenol containing temporary cement on the bond strength of two resin composite core materials to dentin", J Prosthodent, 6, pp.37~42 (1997)
- Yap AU, "Influence of eugenol-containing temporary restorations on bond strength of composite to dentin", Oper Dent, 26, pp.556~561 (2001)
- 조낙연, "레진계 임시수복재의 중합수축,수화팽창과 미세누출", 대한치과보존학회지, 33(2), pp.115~124 (2008), 대한치과보존학회