치과용 접착제가 복합레진 인레이와 레진시멘트의 결합력에 미치는 영향
INFLUENCE OF ADHESIVE APPLICATION ON SHEAR BOND STRENGTH OF THE RESIN CEMENT TO INDIRECT RESIN COMPOSITE
1
조회
0
다운로드
6
인용
0
참고문헌
키워드
초록
This study analyzed the influence of dental adhesive/primer on the bond strength between indirect resin composite and the resin cement. Seventy disc specimens of indirect resin composite (Tescera Dentin, Bisco) were fabricated. And bonding area of all specimens were sandblasted and silane treated for one minute. The resin cements were used with or without application of adhesive/primer to bonding area of indirect resin restoration: Variolink-II (Ivoclar-Vivadent): Exite DSC, Panavia-F (Kuraray): ED-Primer, RelyX Unicem (3M ESPE): Single-Bond, Duolink (Bisco): One-step, Mulitlink (Ivoclar-Vivadent): Multilinh Primer. Shear bond strength was measured by Instron universal testing machine. Adhesive application improved shear bond strength (p < 0.05). But Variolink II and Panavia-F showed no statistically significant difference according to the adhesive application. With the above results, when resin inlay is luted by resin cement it seems that application of dental adhesive/primer is necessary in order to improve the bond strength.
Abstract
This study analyzed the influence of dental adhesive/primer on the bond strength between indirect resin composite and the resin cement. Seventy disc specimens of indirect resin composite (Tescera Dentin, Bisco) were fabricated. And bonding area of all specimens were sandblasted and silane treated for one minute. The resin cements were used with or without application of adhesive/primer to bonding area of indirect resin restoration: Variolink-II (Ivoclar-Vivadent): Exite DSC, Panavia-F (Kuraray): ED-Primer, RelyX Unicem (3M ESPE): Single-Bond, Duolink (Bisco): One-step, Mulitlink (Ivoclar-Vivadent): Multilinh Primer. Shear bond strength was measured by Instron universal testing machine. Adhesive application improved shear bond strength (p < 0.05). But Variolink II and Panavia-F showed no statistically significant difference according to the adhesive application. With the above results, when resin inlay is luted by resin cement it seems that application of dental adhesive/primer is necessary in order to improve the bond strength.
참고문헌 (36)
- O’Brien WJ, "Dental materials and their selection. 3rd ed", pp.377~ (2002), Quintessence
- Irie M, "Current luting cements; marginal gap formation of composite inlay and their mechanical properties", Dent Mater, 17, pp.347~353 (2001)
- Kramer N, "Adhesive luting of indirect restorations", Am J Dent, 13, pp.60~76D (2000)
- Christensen GJ, "Acceptability of alternatives for conservative restoration of posterior teeth", J Esthet Dent, 7, pp.228~232 (1995)
- Burke FJ, "The effect of variations in bonding procedure on fracture resistance of dentin-bonded all-ceramic crowns", Quint int, 26, pp.293~300 (1995)
- Jensen ME, "Etched-porcelain resin-bonded full veneer crowns: in vitro fracture resistance", Compendium, 10, pp.336~338 (1989)
- Jacobsen PH, "Luting agent for ceramic and polymeric inlays and onlays", Int Dent J, 42, pp.145~149 (1992)
- Braga RR, "Pilot study on the early shear strength of porcelain dentin bonding using dual cure cements", J Prosthet Dent, 81, pp.285~289 (1999)
- Braga RR, "Mechanical properties of resin cements with different activation mode", J Oral Rehabil, 29, pp.257~262 (2002)
- Hahn P, "Influence of resin cement viscosity on microleakage of ceramic inlays", Dent Mater, 17, pp.191~196 (2001)
- Kitasako Y, "Shear bond strength of three resin cements to dentin over 3 years in vitro", J Dent, 19, pp.139~144 (2001)
- Sanares AM, "Adverse surface interactions between one-bottle light cured adhesives and chemical cured composites", Dent Mater, 17, pp.542~556 (2001)
- Yanagawa T, "Relationship between degree of polymerization of resin composite and bond strength to Gluma-treated dentin", Am J Dent, 7, pp.157~160 (1994)
- Keley WP 3rd, "Bond strengths to enamel and dentin with indirect and direct resin composites", Am J Dent, 9, pp.105~108 (1996)
- Nikaido T, "Shear bond strengths of a single- step bonding system to enamel and dentin", Dent Mater J, 16, pp.40~47 (1997)
- Watanabe EK, "Improvement in the tensile bond strength between resin cement and dentin surfaces after temporary cement application", Int J Prosthodont, 11, pp.203~211 (1998)
- Phrukkanon S, "Effect of crosssectional surface area on bond strengths between resin and dentin", Dent Mater, 14, pp.120~128 (1998)
- Davies B, "A comparison of the shear bond strength of composite resin bonded by a fourth and fifth generation dentin adhesive to bovine teeth", Prim Dent Care, 6, pp.103~106 (1999)
- Mondragon E, "Shear strength of dentin and bonded composites", J Adhes Dent, 3, pp.227~236 (2001)
- Inoue S, "Microtensile bond strength of eleven contemporary adhesives to dentin", J Adhes Dent, 3, pp.237~245 (2001)
- Suliman JF, "Effect of surface treatment and bonding agents on bond strength of composite resin to porcelain", J Prosthet Dent, 70, pp.118~120 (1993)
- Roulet JF, "Effect of treatment and storage conditions on ceramic", composite bond strength, 1995, pp.74, 381~387
- Ozden AN, "Effect of surface treatments of porcelain on the shear bond strength of applied dual-cure cement", J Prosthet Dent, 72, pp.85~88 (1994)
- Thurmond JW, "Effect of porcelain surface treatments on bond strength of composite resin bonded to porcelain", J Prosthet Dent, 72, pp.355~359 (1994)
- Kupiec KA, "Evaluation of porcelain surface treatments and agents for composite-to-porcelain repair", J Prosthet Dent, 76, pp.119~124 (1996)
- Kamada K, "Effect of ceramic surface treatments on the bond of four resin luting agents to a ceramic material", J Prosthet Dent, 79, pp.508~513 (1998)
- Madani M, "Effect of surface treatments on shear bond strengths between a resin cement and an alumina core", J Prosthet Dent, 83, pp.644~647 (2000)
- Della Bona A, "shear vs tensile bond strength of resin composite bonded to ceramic", J Dent Res, 74, pp.1591~1596 (1995)
- Jackson RD, "An asthetic bonded inlay", onlay technique for posterior teeth, 1990, pp.21, 7~12
- Sheth PJ, "Comparative evaluation of three resin inlay techniques: microleakage studies", Quint Int, 20, pp.831~836 (1989)
- Craig RG, "Posterior Composite Resin Dental Restorative Materials in : Overview of posterior composite resins for use in clinical practice", pp.199~211 (1985), 3M Co
- Lopes LMP, "Effect of a new resin inlay", onlay restorative material on cuspal reinforcement, 1991, pp.22, 641~645
- 강현숙, "2급 와동 복합레진 인레이 충전 후 변연누출에 관한 연구", 대한치과보존학회지, 17, pp.191~205 (1992)
- Douglas WH, "A comparison between the microleakage of direct and indirect composite restorative systems", J Dent, 17, pp.184~188 (1989)
- Kance J, "Composite resin luting materials: A rationale for the‘ 90s”", Esthetic Dentistry, 1, pp.105~109 (1989)
- Heymann HO, "Indirect composite resin veneers: an alternative, Porcelain laminate veneers", pp.126~133 (1998), Quintessence books
