Validation of a 750 kW semi-submersible floating offshore wind turbine numerical model with model test data, part II: Model-II
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Floating Offshore Wind Turbines (FOWT) installed in the deep sea regions where stable and strong wind flows are abundant would have significantly improved energy production capacity. When designing FOWT, it is essential to understand the stability and motion performance of the floater.Water tank model tests are required to evaluate these aspects of performance. This paper describes a model test and numerical simulation for a 750-kW semi-submersible platform wind turbine model-II. In the previous model test, the 750-kW FOWT model-I suffered slamming phenomena from extreme wave conditions. Because of that, the platform freeboard of model-II was increased to mitigate the slamming load on the platform deck structure in extreme conditions. Also, the model-I pitch Response Amplitude Operators (RAO) of simulation had strong responses to the natural frequency region. Thus, the hub height of model- II was decreased to reduce the pitch resonance responses from the low-frequency response of the system. Like the model-I, 750-kW FOWT model-II was built with a 1/40 scale ratio. Furthermore, the experiments to evaluate the performance characteristics of the model-II wind turbine were executed at the same location and in the same environment conditions as were those of model-I. These tests included a free decay test, and tests of regular and irregular wave conditions. Both the experimental and simulation conditions considered the blade rotating effect due to the wind. The results of the model tests were compared with the numerical simulations of the FOWT using FAST (Fatigue, Aerodynamics, Structures, and Turbulence) code from the National Renewable Energy Laboratory (NREL).
Abstract
Floating Offshore Wind Turbines (FOWT) installed in the deep sea regions where stable and strong wind flows are abundant would have significantly improved energy production capacity. When designing FOWT, it is essential to understand the stability and motion performance of the floater.Water tank model tests are required to evaluate these aspects of performance. This paper describes a model test and numerical simulation for a 750-kW semi-submersible platform wind turbine model-II. In the previous model test, the 750-kW FOWT model-I suffered slamming phenomena from extreme wave conditions. Because of that, the platform freeboard of model-II was increased to mitigate the slamming load on the platform deck structure in extreme conditions. Also, the model-I pitch Response Amplitude Operators (RAO) of simulation had strong responses to the natural frequency region. Thus, the hub height of model- II was decreased to reduce the pitch resonance responses from the low-frequency response of the system. Like the model-I, 750-kW FOWT model-II was built with a 1/40 scale ratio. Furthermore, the experiments to evaluate the performance characteristics of the model-II wind turbine were executed at the same location and in the same environment conditions as were those of model-I. These tests included a free decay test, and tests of regular and irregular wave conditions. Both the experimental and simulation conditions considered the blade rotating effect due to the wind. The results of the model tests were compared with the numerical simulations of the FOWT using FAST (Fatigue, Aerodynamics, Structures, and Turbulence) code from the National Renewable Energy Laboratory (NREL).
참고문헌 (19)
- 안현정, "Model test and numerical simulation of OC3 spar type floating offshore wind turbine", International Journal of Naval Architecture and Ocean Engineering, 11(1), pp.1~10 (2019), 대한조선학회[DOI]
- Study on Calculation of Deep-Water Design Waves for Korean Sea, "Chon, K.", Korea Ocean Research & Development Institute, ~ (2016)
- Coulling, A. J., "Validation of a FAST semi-submersible floating wind turbine numerical model with DeepCwind test data", J. Renew. Sustain. Energy, 5, pp.23116~ (2013)[DOI]
- David, K., "The Grand Fleet, Warship Design and Development 1906 - 1922", pp.91~ (1999), Naval Institute Press
- Additional Wind, "Wave Basin Testing of the Deepcwind Semi-submersible with a Performance-Matched Wind Turbine", Andrew J. Goupee, OMAE2014-24172
- Definition of the Floating System for Phase IV of OC3, "Jonkman, J.", National Renewable Energy Laboratory (NREL), ~, pp.Technical Report NREL (2010), TP-500e47535
- Jonkman, J., "Offshore Code Comparison Collaboration (OC3) for IEA Task 23 Offshore Wind Technology and Deployment", NREL, ~, pp.Technical Report NREL (2010), TP-5000e48191
- FAST User's Guide, "Jonkman, J.", NREL, ~, pp.Technical Report NREL (2005), TP-500-38230
- Definition of a 5-MW Reference Wind Turbine for Offshore System Development, "Jonkman, J.", NREL, ~, pp.Technical Report NREL (2009), TP-500e38060
- 김경환, "대형 부유식 파력-해상풍력 복합발전 구조물의 극한환경 운동 성능에 대한 실험적 연구", 한국해양환경•에너지학회지, 19(1), pp.7~17 (2016), 한국해양환경·에너지학회
- Matthew, H., "MoorDyn User's Guide", Mechanical Engineering, pp.2015
- Muller, K., "Improved tank test procedures for scaled floating offshore wind turbines", Int. Wind Eng. Conf. (IWEC 2014), pp.1~12 (2014)
- Robertson, A., "Definition of the Semisubmersible Floating System for Phase II of OC4", ~ (2012)
- Robertson, A. N., "OC5 project phase II : validation of global loads of the DeepCwind floating semisubmersible wind turbine", Energy Procedia, 137, pp.38~57 (2017)[DOI]
- Salzmann, D., "Aerodynamic Damping in the Design of Support Structures for Offshore Wind Turbines", pp.2005
- Shin, H., "Model test of the OC3-hywind floating offshore wind turbine", Twenty-first Int. Offshore Polar Eng. Conference (2011)
- 신현경, "Model test of new floating offshore wind turbine platforms", International Journal of Naval Architecture and Ocean Engineering, 5(2), pp.199~209 (2013), 대한조선학회
- Shin, H, "Motion of OC4 5MW Semi-submersible Offshore Wind Turbine in Irregular Waves", ~ (2013)
- Wendt, F., "Verification and validation of the new dynamic mooring modules available in FAST v8", Presented at the Twenty-Sixth (2016) International Ocean and Polar Engineering Conference (ISOPE) (2016)