본문 바로가기
KERD
논문KCI 등재

근관치료용 전기모터의 회전 안정성 평가

AN EVALUATION OF ROTATIONAL STABILITY IN ENDODONTIC ELECTRONIC MOTORS

서현우|박세희|홍찬의
대한치과보존학회 (Korean Academy Of Conservative Dentistry)|2010.07|Restorative Dentistry and Endodontics|제35권 제4호|pp. 246-256

2

조회

0

다운로드

5

인용

0

참고문헌

키워드

2010RPMRotational speedX-SmartElectronic motor회전속도전기모터회전 안정성Rotational stabilityNumber 4Endomate TC
주제분류치의학

초록

수종의 근관치료용 전기모터들의 반복사용과 시간에 따른 회전속도의 변화를 비교하여 근관치료용 전기모터의 회전 안정성을 평가하고자 하였다. 시간에 따라 변화하는 실제회전속도 및 전압과 전류를 측정하고, Student t-test를 통한 실제회전속도와, 반복측정분석을 통한 상관관계를 비교분석 하였다. 동일 종류의 전기모터들 사이의 모든 측정 결과들은 차이를 보이지 않았다. 모든 전기모터에서 반복사용과 시간의 흐름에 따른 회전속도의 변화는 차이를 보이지 않았다. 이상의 결과로, 본 실험에사용된 모든 전기모터는 일정한 회전속도를 유지해야 하는 회전 안정성의 조건에 충족됨을 알 수 있으며, 반복사용과 시간에따른 신뢰성 있는 회전속도와 안정적인 전압 및 전류의 유지가 가능하리라 생각된다.

Abstract

The purpose of this study was to evaluate a rotational stability of endodontic electronic motors by comparing the changes of rotational speed, depending on the number of usages and with/without static load. Twelve new endodontic electronic motors were used in this study. Non contact type digital tachometer was used for measuring the rotational speed of handpiece. True RMS Multimeter was used for measuring the voltages and the electric currents. All measurements were recorded every 10 seconds during 10 minutes and repeated 9 times. Five repetition was done per each electronic motor. To statistical analysis, student t-test, repeated measures and Scheffe's post-hoc tests were performed. In the same motor group, there was no significant difference in all measurements. In all groups, there was no significant difference in the amount of rotational speed changes depending on the number of usages and with/without static load. In the limitation of this study, the results showed that all kinds of endodontic electronic motors in this study had an established rotational stability. Therefore they could be safely used in root canal treatment with a reliable maintenance of rotational speed, regardless of the number of usages and with/without load.

참고문헌 (52)

  1. Schilder, "Cleaning and shaping the root canal", Dent Clin North Am, 18, pp.269~296 (1974)
  2. Skidmore AE, "Root canal morphology of human mandibular first molar", Oral Surg Oral Med Oral Pathol, 32, pp.778~784 (1971)
  3. Lim KC, "The effect of root canal preparation on the shape of the curved root canal", Int Endod J, 18, pp.233~239 (1985)
  4. Kesseler JR, "Comparison of the relative risk of molar root perforations using various endodontic instrumentation techniques", J Endod, 9, pp.437~439 (1983)
  5. Weine F, "The effect of preparation procedures on the original canal shape and on apical foramen shape", J Endod, 1, pp.255~262 (1975)
  6. Walia H, "An initial investigation of the bending and torsional properties of nitinol root canal files", J Endod, 14, pp.346~ (1981)
  7. Glosson CR, "A comparison of root canal preparations using Ni-Ti hand, Ni-Ti engine-driven, and K-flex endodontic instruments", J Endod, 21, pp.146~151 (1995)
  8. Serene TP, "Nickel-titanium instruments: applications in endodontics", pp.67~78 (1995), Mosby
  9. Averbach RE, "Endodontics in the 21st century: the rotary revolution", Compend Contin Educ Dent, 22, pp.27~34 (2001)
  10. Spili P, "The impact of instrument fracture on outcome of endodontic treatment", J Endod, 31, pp.845~850 (2005)
  11. Parashos P, "Factors influencing defects of rotary nickel-titanium endodontic instruments after clinical use", J Endod, 30, pp.722~725 (2004)
  12. Schilder H, "Filling root canals in three dimensions", Dent Clin North Am, 11, pp.723~744 (1967)
  13. Crump MC, "Relationship of broken root canal instruments to endodontic case prognosis: a clinical investigation", J Am Dent Assoc, 80, pp.1341~1347 (1970)
  14. Hulsmann M, "Influence of several factors on the success or failure of removal of fractured instruments from root canals", Endod Dent Traumatol, 15, pp.252~258 (1999)
  15. Souter NJ, "Complications associated with fractured file removal using an ultrasonic technique", J Endod, 31, pp.450~452 (2005)
  16. Sattapan B, "Defect in rotary nickel-titanium files after clinical use", J Endod, 26, pp.161~165 (2000)
  17. Cohen S, "Pathways of the pulp. 8th ed", pp.533~534 (2002), Mosby
  18. Yared GM, "Influence of torque control motors and the operator’s proficiency on ProTaper failures", Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 96, pp.229~233 (2003)
  19. Gabel WP, "Effect of rotational speed on nickel-titanium file distortion", J Endod, 25, pp.752~754 (1999)
  20. 서민철, "ProTaper™로 근관성형시 회전 속도 변화가 근관형태에 미치는 영향", 대한치과보존학회지, 31(3), pp.179~185 (2006), 대한치과보존학회
  21. Dietz DB, "Effect of rotational speed on the breakage of nickel- titanium rotary files", J Endod, 26, pp.68~71 (2000)
  22. Shin JH, "A study of working efficiency and file deformation of GT rotary file in curved canals", J Kor Acad Cons Dent, 26, pp.418~435 (2001)
  23. Puolsen BW, "Effect of nickeltitanium engine-driven instrument rotational speed on root canal morphology", J Endod, 21, pp.609~612 (1995)
  24. Yared G, "Accuracy of the DTC torque control motor for nickel-titanium rotary instruments", Int Endod J, 34, pp.399~402 (2004)
  25. Yared G, "Accuracy of the Nouvag torque control motor for nickel-titanium rotary instruments", Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 97, pp.499~501 (2004)
  26. Yared G, "Accuracy of the TCM Endo III torque-control motor for nickel-titanium rotary instruments", J Endod, 30, pp.644~645 (2004)
  27. "Operation manual of Endomate TC", NSK 10, ~ (2005)
  28. ADA Professional Product Review, "Laboratory Testing Methods 2006. in American National Standard", American Dental Association Specification No. 28 for root canal files and reamers, type K for hand use, 2006
  29. Mandel E, "Rotary Ni-Ti ProFile systems for preparing curved canals in resin blocks: influence of operator on instrument breakage", Int Endod J, 32, pp.436~443 (1999)
  30. Yared GM, "Influence of rotational speed, torque, and operator’s proficiency on ProFile failures", Int Endod J, 34, pp.47~53 (2001)
  31. Yared GM, "Influence of rotational speed, torque and operator proficiency on failure of Greater Taper files", Int Endod J, 35, pp.7~12 (2002)
  32. Gambarini G, "Cyclic fatigue of nickel-titanium rotary instruments after clinical use with low- and hightorque endodontic motors", J Endod, 27, pp.772~774 (2001)
  33. Yared G, "Failure of ProFile instruments with air, high torque control and low torque control motors", Int Endod J, 34, pp.471~475 (2001)
  34. Pruett JP, "Cyclic fatigue testing of nickel titanium endodontic instruments", J Endod, 23, pp.77~85 (1997)
  35. Gambarini G, "Cyclic fatigue of ProFile rotary instruments after prolonged clinical use", Int Endod J, 34, pp.386~389 (2001)
  36. Yared GM, "Cyclic fatigue of Profile rotary instruments after simulated clinical use", Int Endod J, 32, pp.115~119 (1999)
  37. Yared GM, "Cyclic fatigue of Profile rotary instruments after clinical use", Int Endod J, 33, pp.204~207 (2000)
  38. 신유미, "전동식 니켈 티타늄 파일의 표면 결함 및 단면 형태가 반복응력 하에서 피로 파절에 미치는 영향", 대한치과보존학회지, 29(3), pp.267~272 (2004), 대한치과보존학회
  39. Kim JW, "Lifetime and fracture patterns of NiTi rotary files in molars", J Kor Acad Cons Dent, 30, pp.190~198 (2005)
  40. Blum JY, "Location of contact areas on rotary Profile instruments in relationship to the forces developed during mechanical preparation on extracted teeth", Int Endod J, 32, pp.108~114 (1999)
  41. Thompson SA, "Shaping ability of Quantec Series 2000 rotary nickel-titanium instruments in simulated root canals. Part 1", Int Endod J, 31, pp.259~267 (1998)
  42. Thompson SA, "Shaping ability of ProFile .04 Taper Series 29 rotary nickel-titanium instruments in simulated root canals. Part 2", Int Endod J, 30, pp.8~15 (1997)
  43. Barbakow F, "The Lightspeed preparation technique evaluated by Swiss clinicians after attending continuing education courses", Int Endod J, 30, pp.46~50 (1997)
  44. Yu JS, "The surface modification of Ti-based alloy with long cycle life for Ni", MH secondary battery, 2000, pp.11, 151~161
  45. Park CN, "Characteristics and Research Trends of Ni", MH secondary battery, 1991, pp.12, 28~33
  46. Berutti E, "Influence of manual preflaring and torque on the failure rate of ProTaper rotary instruments", J Endod, 30, pp.228~230 (2004)
  47. Bahia MGA, "Physical and mechanical characterization and the influence of cyclic loading on the behavior of nickeltitanium wires employed in the manufacture of rotary endodontic instruments", Int Endod J, 38, pp.795~801 (2005)
  48. Kobayashi C, "A new engine-driven canal preparation system with electronic canal measuring capability", J Endod, 23, pp.751~754 (1997)
  49. Li UM, "Cyclic fatigue of endodontic nickel-titanium rotary instruments: static and dynamic tests", J Endod, 28, pp.448~451 (2002)
  50. Roane J, "The balanced force concept for instrumentation of curved canals", J Endod, 11, pp.203~211 (1985)
  51. Kyomen SM, "Critical analysis of the balanced force technique in endodontics", J Endod, 20, pp.332~337 (1994)
  52. Petka K, "Implementing one-visit root canal therapy", Dent Today, 17, pp.112~117 (1998)

관련 논문AI추천

The Evaluation of RPM Change in X-Smart According to Power Source ; Endodontic Wireless Electronic Motor김진우, 박세희, 정동빈, 조경모대한턱관절교합학회 · 구강회복응용과학지2011 · 제27권 제1호여러 근관치료용 무선 핸드피스의 진동양상 비교이윤, 김진우, 박세희, 이보경, 조경모대한턱관절교합학회 · 구강회복응용과학지2022 · 제38권 제2호ProTaper™로 근관성형시 회전 속도 변화가 근관형태에 미치는 영향강인철, 김동준, 서민철, 오원만, 전윤정, 황윤찬, 황인남대한치과보존학회 · Restorative Dentistry and Endodontics2006 · 제31권 제3호Rotational stability of endodontic motors박세희대한치과보존학회 · Restorative Dentistry and Endodontics2014 · 제39권 제3호K3에 축적된 내부 응력이 피로 파절에 미치는 영향김준영, 김진우, 박세희, 조경모대한치과보존학회 · Restorative Dentistry and Endodontics2012 · 제37권 제2호Adaptive movement가 twisted file의 내구성과 작업 시간에 미치는 영향김진우, 박세희, 박소라, 이상호, 조경모대한턱관절교합학회 · 구강회복응용과학지2019 · 제35권 제1호

이 간행물의 다른 논문 (8건)

광중합기 사용 시의 감염 조절장훈상pp. 235-237치수/치근단 질환에 이환된 영구치의 치수 조직 재생과 치근 형성손호현, 백승호, 유연지pp. 238-245미성숙 치아 모델에서 포스트의 종류와 크기가 치아의 파절 저항성에 미치는 영향에 관한 연구김종현, 박정원, 박성호, 정일영pp. 257-266COMPARISON OF SCREW-IN EFFECT FOR SEVERAL NICKEL-TITANIUM ROTARY INSTRUMENTS IN SIMULATED RESIN ROOT CANAL김영경, 진명욱, 김성교, 하정홍pp. 267-272흰 쥐 치아 재식 후 치수 치유 양상의 조직학적 관찰김의성, 이승종, 정일영, 고은진, 정한성pp. 273-284
원문 보기