Effect of organic acids in dental biofilm on microhardness of a silorane-based composite
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Objectives: This study evaluated the effect of lactic acid and acetic acid on the microhardness of a silorane-based composite compared to two methacrylate-based composite resins. Materials and Methods: Thirty disc-shaped specimens each were fabricated of Filtek P90, Filtek Z250 and Filtek Z350XT. After measuring of Vickers microhardness, they were randomly divided into 3 subgroups (n = 10) and immersed in lactic acid, acetic acid or distilled water. Microhardness was measured after 48 hr and 7 day of immersion. Data were analyzed using repeated measures ANOVA (p < 0.05). The surfaces of two additional specimens were evaluated using a scanning electron microscope (SEM) before and after immersion. Results: All groups showed a reduction in microhardness after 7 day of immersion (p < 0.001). At baseline and 7 day, the microhardness of Z250 was the greatest, followed by Z350 and P90 (p < 0.001). At 48 hr, the microhardness values of Z250 and Z350 were greater than P90 (p < 0.001 for both), but those of Z250 and Z350 were not significantly different (p = 0.095). Also, the effect of storage media on microhardness was not significant at baseline, but significant at 48 hr and after 7 day (p = 0.001 and p < 0.001, respectively). Lactic acid had the greatest effect. Conclusions: The microhardness of composites decreased after 7 day of immersion. The microhardness of P90 was lower than that of other composites. Lactic acid caused a greater reduction in microhardness compared to other solutions.
Abstract
Objectives: This study evaluated the effect of lactic acid and acetic acid on the microhardness of a silorane-based composite compared to two methacrylate-based composite resins. Materials and Methods: Thirty disc-shaped specimens each were fabricated of Filtek P90, Filtek Z250 and Filtek Z350XT. After measuring of Vickers microhardness, they were randomly divided into 3 subgroups (n = 10) and immersed in lactic acid, acetic acid or distilled water. Microhardness was measured after 48 hr and 7 day of immersion. Data were analyzed using repeated measures ANOVA (p < 0.05). The surfaces of two additional specimens were evaluated using a scanning electron microscope (SEM) before and after immersion. Results: All groups showed a reduction in microhardness after 7 day of immersion (p < 0.001). At baseline and 7 day, the microhardness of Z250 was the greatest, followed by Z350 and P90 (p < 0.001). At 48 hr, the microhardness values of Z250 and Z350 were greater than P90 (p < 0.001 for both), but those of Z250 and Z350 were not significantly different (p = 0.095). Also, the effect of storage media on microhardness was not significant at baseline, but significant at 48 hr and after 7 day (p = 0.001 and p < 0.001, respectively). Lactic acid had the greatest effect. Conclusions: The microhardness of composites decreased after 7 day of immersion. The microhardness of P90 was lower than that of other composites. Lactic acid caused a greater reduction in microhardness compared to other solutions.
참고문헌 (36)
- Erdemir U, "Surface hardness evaluation of different composite resin materials:influence of sports and energy drinks immersion after a short-term period", J Appl Oral Sci, 21, pp.124~131 (2013)
- Bagis YH, "Comparing microleakage and the layering methods of siloranebased resin composite in wide Class II MOD cavities", Oper Dent, 34, pp.578~585 (2009)
- Weinmann W, "Siloranes in dental composites", Dent Mater, 21, pp.68~74 (2005)
- Hengtrakool C, "Effect of naturally acidic agents on microhardness and surface micromorphology of restorative materials", Eur J Dent, 5, pp.89~100 (2011)
- de Moraes RR, "Effects of 6 months of aging in water on hardness and surface roughness of two microhybrid dental composites", J Prosthodont, 17, pp.323~326 (2008)
- Yap AU, "Chemical degradation of composite restoratives", J Oral Rehabil, 28, pp.1015~1021 (2001)
- Hannig C, "Effect of bleaching on subsurface micro-hardness of composite and a polyacid modified composite", Dent Mater, 23, pp.198~203 (2007)
- Yap AU, "Environmental damage and occlusal contact area wear of composite restoratives", J Oral Rehabil, 29, pp.87~97 (2002)
- Kalachandra S, "Water sorption and mechanical properties of light-cured proprietary composite tooth restorative materials", Biomaterials, 13, pp.105~109 (1992)
- Curtis AR, "Water uptake and strength characteristics of a nanofilled resin-based composite", J Dent, 36, pp.186~193 (2008)
- da Silva EM, "The diffusion kinetics of a nanofilled and a midifilled resin composite immersed in distilled water, artificial saliva, and lactic acid", Clin Oral Investig, 15, pp.393~401 (2011)
- Badra VV, "Influence of different beverages on the microhardness and surface roughness of resin composites", Oper Dent, 30, pp.213~219 (2005)
- Distler W, "The acid pattern in human dental plaque", J Dent Res, 62, pp.87~91 (1983)
- Borgström MK, "Dental plaque mass and acid production activity of the microbiota on teeth", Eur J Oral Sci, 108, pp.412~417 (2000)
- Namiot DB, "The occurrence of Helicobacter pylori antigens in dental plaque; an association with oral health status and oral hygiene practices", Adv Med Sci, 55, pp.167~171 (2010)
- Silva EM, "Influence of organic acids present in the oral biofilm on the microtensile bond strength of adhesive systems to human dentin", J Biomed Mater Res B Appl Biomater, 100, pp.735~741 (2012)
- Honório HM, "Effect of prolonged erosive pH cycling on different restorative materials", J Oral Rehabil, 35, pp.947~953 (2008)
- Asmussen E, "Softening of BISGMA-based polymers by ethanol and by organic acids of plaque", Scand J Dent Res, 92, pp.257~261 (1984)
- Eick JD, "Stability of silorane dental monomers in aqueous systems", J Dent, 34, pp.405~410 (2006)
- Mujdeci A, "Effect of bleaching agents on the microhardness of tooth-colored restorative materials", J Prosthet Dent, 95, pp.286~289 (2006)
- Stockton LW, "The effect of prolonged packing on the surface hardness of posterior composites", Oper Dent, 27, pp.266~270 (2002)
- Wakamatsu Y, "Wear test combining simulated occlusal wear and toothbrush wear", Dent Mater J, 22, pp.383~396 (2003)
- García-Godoy F, "Effect of APF Minute-Foam on the surface roughness, hardness, and micromorphology of high-viscosity glass ionomers", J Dent Child (Chic), 70, pp.19~23 (2003)
- Söderholm KJ, "Bergman M. Hydrolytic degradation of dental composites", J Dent Res, 63, pp.1248~1254 (1984)
- McKinney JE, "Chemical softening and wear of dental composites", J Dent Res, 64, pp.1326~1331 (1985)
- Yap AU, "Effect of food-simulating liquids on surface characteristics of composite and polyacid-modified composite restoratives", Oper Dent, 25, pp.170~176 (2000)
- Wan Bakar W, "Susceptibility of selected tooth-coloured dental materials to damage by common erosive acids", Aust Dent J, 53, pp.226~234 (2008)
- Kamangar SS, "Effects of 15% Carbamide peroxide and 40% hydrogen peroxide on the microhardness and color change of composite resins", J Dent (Tehran), 11, pp.196~209 (2014)
- D’Alpino PH, "Methacrylate- and silorane-based composite restorations: hardness, depth of cure and interfacial gap formation as a function of the energy dose", Dent Mater, 27, pp.1162~1169 (2011)
- Torres SA, "Degree of conversion and hardness of a silorane-based composite resin: effect of light-curing unit and depth", Oper Dent, 39, pp.E137~E146 (2014)
- Kusgoz A, "Silorane-based composite: depth of cure, surface hardness, degree of conversion, and cervical microleakage in Class II cavities", J Esthet Restor Dent, 23, pp.324~335 (2011)
- Yesilyurt C, "Effects of food-simulating liquids on the mechanical properties of a silorane-based dental composite", Dent Mater J, 28, pp.362~367 (2009)
- Mitra SB, "An application of nanotechnology in advanced dental materials", J Am Dent Assoc, 134, pp.1382~1390 (2003)
- Beun S, "Characterization of nanofilled compared to universal and microfilled composites", Dent Mater, 23, pp.51~59 (2007)
- Rodrigues Junior SA, "Flexural strength and modulus of elasticity of different types of resin-based composites", Braz Oral Res, 21, pp.16~21 (2007)
- Sharafeddin F, "Effects of 35% carbamide peroxide gel on surface roughness and hardness of composite resins", J Dent (Tehran), 7, pp.6~12 (2010)
