Hydrodynamic characteristics of X-Twisted rudder for large container carriers
2
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
This paper shows the numerical and experimental results about the hydrodynamic characteristics of XTwisted rudders having continuous twist of the leading edge along the span. All the results were compared with those of the semi-balanced rudder. Calculation through the Reynolds-Averaged Navier-Stokes Equation (RANSE) code with propeller sliding meshes shows large inflow angle and fast inflow velocity in the vicinity of ±0.7 R from the shaft center,so it may cause cavitation. Also, X-Twisted rudder has relatively small inflow angles along the rudder span compared with semi-balanced rudder. For the performance validation, rudders for two large container carriers were designed and tested. Cavitation tests at the medium sized cavitation tunnel with respect to the rudder types and twisted angles showed the effectiveness of twist on cavitation and the tendency according to the twist. And the resistance, self-propulsion and manoeuvring tests were also carried out at the towing tank. As a result, in the case of X-Twisted rudder, ship speed was improved with good manoeuvring performance. Especially, it was found out that manoeuvring performance between port and starboard was well balanced compared with semi-balanced rudders.
Abstract
This paper shows the numerical and experimental results about the hydrodynamic characteristics of XTwisted rudders having continuous twist of the leading edge along the span. All the results were compared with those of the semi-balanced rudder. Calculation through the Reynolds-Averaged Navier-Stokes Equation (RANSE) code with propeller sliding meshes shows large inflow angle and fast inflow velocity in the vicinity of ±0.7 R from the shaft center,so it may cause cavitation. Also, X-Twisted rudder has relatively small inflow angles along the rudder span compared with semi-balanced rudder. For the performance validation, rudders for two large container carriers were designed and tested. Cavitation tests at the medium sized cavitation tunnel with respect to the rudder types and twisted angles showed the effectiveness of twist on cavitation and the tendency according to the twist. And the resistance, self-propulsion and manoeuvring tests were also carried out at the towing tank. As a result, in the case of X-Twisted rudder, ship speed was improved with good manoeuvring performance. Especially, it was found out that manoeuvring performance between port and starboard was well balanced compared with semi-balanced rudders.
참고문헌 (25)
- Abbott, I.H., "Theory of wing sections" (1959), Dover
- Brix, J., "Manoeuvring technical manual" (1993), Seehafen Verlag
- Chang, B.J., "Asymmetric ship rudder form and section", Korea. Pat. 1011103920000, ~ (2012)
- 최정은, "전가동타와 비대칭타의 유체동역학적 특성 및 속도성능", 대한조선학회 논문집, 47(2), pp.163~177 (2010), 대한조선학회
- Fujii, H., "Experimental researches on rudder performance (2)", The Society of Naval Architects of Japan, 110, pp.31~42 (1961)
- Greitsch, L., "Prognosis of rudder cavitation risk in ship operation", Proceedings of the 10th numerical towing tank symposium. Hamburg (2008)
- ITTC, "Report of the performance committee", Proceedings of 15th ITTC. Hague, pp.359~404 (1978)
- ITTC, "Report of the specialist committee on Cavitation erosion on propellers and appendages on high powered", high speed ships, 2005, 509~542
- 김성표, "혼-타의 간극 캐비테이션 침식 저감을 위한 실험적 연구", 대한조선학회 논문집, 43(5), pp.578~585 (2006), 대한조선학회
- 김인환, "대형 컨테이너선용 Twist 일체형 타 개발", 대한조선학회 논문집, 46(5), pp.479~487 (2009), 대한조선학회
- Lee, J.S., "A study on the effect of rudder section and planform on the characteristics of cavitation and maneuverability", HHI Engineering Review, 26(4), pp.3~8 (2007)
- Mandel, P., "Some hydrodynamical aspects of appendage design", Society of Naval Architects and Marine Engineers-Transactions, 61, pp.464~515 (1953)
- Mandel, P., "Ship manoeuvring and control. Principles of Naval Architecture", SNAME, ~ (1967)
- Mewis, F., "The challenge of very large container ships-A hydrodynamic view", 9th Symposium on Practical Design of Ships and Other Floating Structures, pp.173~181 (2004)
- Molland, A.F., "Marine rudders and control surfaces" (2007), Butterworth-Heinemann
- Nishiyama, S., "Experiment on rudder cavitation and its preventive measures", Proceedings of 14th ITTC. Ottawa, pp.218~226 (1975)
- Okada, S., "On the results of open test of model rudders", The Society of Naval Architects of Japan, 103, pp.91~98 (1958)
- Paik, B.G., "Experimental study on the gap entrance profile affecting rudder gap cavitation", Ocean Engineering, 35(1), pp.139~149 (2008)
- 이영길, "캐비테이션 감소를 위한 혼타의 형상 연구", 대한조선학회 논문집, 47(4), pp.553~564 (2010), 대한조선학회
- 서대원, "A Numerical study for the efficacy of flow injection on the diminution of rudder cavitation", International Journal of Naval Architecture and Ocean Engineering, 2(2), pp.104~111 (2010), 대한조선학회
- Shen, Y.T., "A twisted rudder for reduced cavitation", Journal of Ship Research, 41(4), pp.260~272 (1997)
- Södding, H., "Prediction of ship steering capabilities", Schiffstechnik, 29(1), pp.3~29 (1982)
- A model testing technique and method of analysis for the prediction of steering and manoeuvring qualities of surface vessels, "Strom-Tejsen, J.", ~, pp.Hydro-og Aerodynamisk Laboratorium Report Hy-7 (1966)
- Sung, Y.J., "Effects of the self-propulsion point during PMM test on the prediction of ship manoeuvrability", International conference on marine simulation and ship manoeuvrability (2009)
- Whicker, L.F., "Free stream characteristics of a family of low aspect ratio control surfaces for application to ship design", DTMB, 933~ (1958)