The effect of different drinks on the color stability of different restorative materials after one month
2
조회
0
다운로드
7
인용
0
참고문헌
키워드
초록
Objectives: The aim of this study was to evaluate the effect of three different drinks on the color parameters of four different restorative materials. Materials and Methods: Three different composites (Filtek Ultimate Universal Restorative, Filtek Ultimate Flowable, and Filtek Silorane, 3M ESPE) and a polyacid-modified composite resin material (Dyract XP, Dentsply DeTrey GmbH) were evaluated. Eighty-four disc-shaped specimens of 8 mm in diameter and 2 mm in thickness were prepared (n = 21 each). Color coordinates (L*a*b*, ΔL*, Δa*, Δb*, and ΔE*) were measured using a VİTA Easyshade Compact (VİTA Zahnfabrik) after 24 hr of storage (baseline) and after 30 day of storage in three different beverages of black tea, Coca cola, or water (control) (n = 7). In each beverage, the specimens were stored three times a day, one hr each, for 30 day. The color changes (ΔE) were calculated and were analyzed by Kruskal- Wallis and Dunn multiple comparison test. Results: The color difference (ΔE*) of the resin materials ranged between 1.31 and 15.28 after 30 day of immersion in the staining solutions. Dyract XP in Coca cola (15.28 ± 2.61) and black tea (12.22 ± 2.73) showed the highest mean ΔE* value after 30 day, followed by Filtek Ultimate Universal Restorative (5.99 ± 1.25) and Filtek Ultimate Flowable (4.71 ± 1.40) in black tea (p < 0.05). Conclusions: The compomers displayed unacceptable color changes at the end of 30 day in all beverages. Among resin composites, the silorane based composite exhibited relatively good color stability than the others. Filtek Ultimate Universal Restorative and Filtek Flowable showed similar color changes in all beverages.
Abstract
Objectives: The aim of this study was to evaluate the effect of three different drinks on the color parameters of four different restorative materials. Materials and Methods: Three different composites (Filtek Ultimate Universal Restorative, Filtek Ultimate Flowable, and Filtek Silorane, 3M ESPE) and a polyacid-modified composite resin material (Dyract XP, Dentsply DeTrey GmbH) were evaluated. Eighty-four disc-shaped specimens of 8 mm in diameter and 2 mm in thickness were prepared (n = 21 each). Color coordinates (L*a*b*, ΔL*, Δa*, Δb*, and ΔE*) were measured using a VİTA Easyshade Compact (VİTA Zahnfabrik) after 24 hr of storage (baseline) and after 30 day of storage in three different beverages of black tea, Coca cola, or water (control) (n = 7). In each beverage, the specimens were stored three times a day, one hr each, for 30 day. The color changes (ΔE) were calculated and were analyzed by Kruskal- Wallis and Dunn multiple comparison test. Results: The color difference (ΔE*) of the resin materials ranged between 1.31 and 15.28 after 30 day of immersion in the staining solutions. Dyract XP in Coca cola (15.28 ± 2.61) and black tea (12.22 ± 2.73) showed the highest mean ΔE* value after 30 day, followed by Filtek Ultimate Universal Restorative (5.99 ± 1.25) and Filtek Ultimate Flowable (4.71 ± 1.40) in black tea (p < 0.05). Conclusions: The compomers displayed unacceptable color changes at the end of 30 day in all beverages. Among resin composites, the silorane based composite exhibited relatively good color stability than the others. Filtek Ultimate Universal Restorative and Filtek Flowable showed similar color changes in all beverages.
참고문헌 (33)
- Craig R, "Dental materials properties and manipulation", pp.145~156 (2000), Mosby
- Brandt WC, "Effect of photoactivation mode on the hardness and bond strength of methacrylate- and Silorane monomerbased composites", J Adhes Dent, 15, pp.33~39 (2013)
- Yap AU, "Finishing", polishing of composite and compomer restoratives: effectiveness of one-step systems, 2004, pp.29, 275~279
- Ilie N, "Investigation on a methacrylate-based flowable composite based on the SDR technology", Dent Mater, 27, pp.348~355 (2011)
- Peutzfeldt A, "Resin composites in dentistry: the monomer systems", Eur J Oral Sci, 105, pp.97~116 (1997)
- Moszner N, "New developments of polymer dental composites", Prog Polym Sci, 26, pp.535~576 (2001)
- Moszner N, "A partially aromatic urethane dimethacrylate as a new substitute for Bis-GMA in restorative composites", Dent Mater, 24, pp.694~699 (2008)
- Marghalani HY, "Effect of filler particles on surface roughness of experimental composite series", J Appl Oral Sci, 18, pp.59~67 (2010)
- Turssi CP, "Composite surfaces after finishing and polishing techniques", Am J Dent, 13, pp.136~138 (2000)
- Meyer JM, "Compomers:between glass-ionomer cements and composites", Biomaterials, 19, pp.529~539 (1998)
- Federlin M, "Clinical evaluation of different adhesive systems for restoring teeth with erosion lesions", Clinic Oral Investig, 2, pp.58~66 (1998)
- Bayne S, "Sturdevant’s art & science of operative dentistry", pp.135~234 (2002), Mosby
- Nasim I, "Color stability of microfilled, microhybrid and nanocomposite resins-an in vitro study", J Dent, 38(Suppl 2), pp.e137~e142 (2010)
- Bagheri R, "Influence of foodsimulating solutions and surface finish on susceptibility to staining of aesthetic restorative materials", J Dent, 33, pp.389~398 (2005)
- Dietschi D, "Comparison of the color stability of ten new-generation composites:an in vitro study", Dent Mater, 10, pp.353~362 (1994)
- Dos Santos PA, "Chemical and morphological features of dental composite resin: influence of light curing units and immersion media", Microsc Res Tech, 73, pp.176~181 (2010)
- Janda R, "Color stability of resin matrix restorative materials as a function of the method of light activation", Eur J Oral Sci, 112, pp.280~285 (2004)
- Taşkınsel E, "Effects of sports beverages and polishing systems on color stability of different resin composites", J Conserv Dent, 17, pp.325~329 (2014)
- Garcia PPNS, "Influence of surface sealant on the translucency of composite resin: effect of immersion time and immersion media", Mater Res, 11, pp.193~197 (2008)
- Anusavice KJ, "Phillips’ science of dental materials", pp.46~51 (2003), Elsevier
- Liberman R, "Development and assessment of an objective method of colour change measurement for acrylic denture base resins", J Oral Rehabil, 22, pp.445~449 (1995)
- 김은하, "Effect of resin thickness on the microhardness and optical properties of bulk-fill resin composites", Restorative Dentistry and Endodontics, 40(2), pp.128~135 (2015), 대한치과보존학회
- Janda R, "Color stability of resin-based filling materials after aging when cured with plasma or halogen light", Eur J Oral Sci, 113, pp.251~257 (2005)
- Reis AF, "Effects of various finishing systems on the surface roughness and staining susceptibility of packable composite resins", Dent Mater, 19, pp.12~18 (2003)
- Yazici AR, "The effect of curing units and staining solutions on the color stability of resin composites", Oper Dent, 32, pp.616~622 (2007)
- Villalta P, "Effects of staining solutions and bleaching on color change of dental composite resins", J Prosthet Dent, 95, pp.137~142 (2006)
- Reddy PS, "Effects of commonly consumed beverages on surface roughness and color stability of the nano, microhybrid and hybrid composite resins: an in vitro study", J Contemp Dent Pract, 14, pp.718~723 (2013)
- Palin WM, "The influence of short and medium-term water immersion on the hydrolytic stability of novel lowshrink dental composites", Dent Mater, 21, pp.852~863 (2005)
- Eick JD, "Stability of silorane dental monomers in aqueous systems", J Dent, 34, pp.405~410 (2006)
- Prodan DA, "Influence of opacity on the color stability of a nanocomposite", Clin Oral Investig, 19, pp.867~875 (2015)
- Ergün G, "In vitro color stability of provisional crown and bridge restoration materials", Dent Mater J, 24, pp.342~350 (2005)
- Malekipour MR, "Comparison of color stability of a composite resin in different color media", Dent Res J (Isfahan), 9, pp.441~446 (2012)
- Ortengren U, "Influence of pH and storage time on the sorption and solubility behavior of three composite resin materials", J Dent, 29, pp.35~41 (2001)