Ultimate strength of stiffened panels subjected to non-uniform thrust
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
The current study is focused on the evaluation of the ultimate strength of stiffened panels found in ship hull structures that are subjected to combined uniaxial thrust, in-plane and out-of-plane bending moments. This loading condition, which is in general ignored when performing buckling checks, applies to representative control geometries (stiffener with attached plating) as a consequence of the linearly varying normal stresses along the ship's depth induced by the hull-girder vertical bending moment. The problem is generalized by introducing a non-uniform thrust described by a displacement ratio and rotation angle and by introducing the slenderness ratios, within the practical range of interest. The formed design space is explored through methods sourcing from Design of Experiments and by applying non-linear finite element procedures. Surrogate empirical models have been constructed through regression analysis and Response Surface Methods. An additional empirical model is provided to the literature for predicting the ultimate strength under uniaxial thrust. The numerical experimentation has shown that is a significant influence on the ultimate strength of stiffened panels as the thrust nonuniformity increases.
Abstract
The current study is focused on the evaluation of the ultimate strength of stiffened panels found in ship hull structures that are subjected to combined uniaxial thrust, in-plane and out-of-plane bending moments. This loading condition, which is in general ignored when performing buckling checks, applies to representative control geometries (stiffener with attached plating) as a consequence of the linearly varying normal stresses along the ship's depth induced by the hull-girder vertical bending moment. The problem is generalized by introducing a non-uniform thrust described by a displacement ratio and rotation angle and by introducing the slenderness ratios, within the practical range of interest. The formed design space is explored through methods sourcing from Design of Experiments and by applying non-linear finite element procedures. Surrogate empirical models have been constructed through regression analysis and Response Surface Methods. An additional empirical model is provided to the literature for predicting the ultimate strength under uniaxial thrust. The numerical experimentation has shown that is a significant influence on the ultimate strength of stiffened panels as the thrust nonuniformity increases.
참고문헌 (37)
- Anyfantis, K., "Ultimate compressive strength of eccentrically loaded stiffened panels in ship structures: a computational study", Proceedings of the 38th International Conference on Ocean. Offshore & Arctic Engineering (2019), OMAE2019
- Anyfantis, K. N., "Evaluating the influence of geometric distortions to the buckling capacity of stiffened panels", Thin-Walled Struct, 140, pp.450~465 (2019)
- Araghi, S. N., "Strength of biaxially loaded orthotropic plates", Thin-Walled Struct, 53, pp.40~47 (2012)
- BV, "Buckling Assessment of Plated Structures. NI 615", ~ (2017)
- Chen, B. -Q., "A simplified model for the effect of weld-induced residual stresses on the axial ultimate strength of stiffened plates", J. Mar. Sci. Appl, 17, pp.57~67 (2018)
- Cui, J., "Elastic buckling of stiffened panels in ships under biaxial compression", Ships Offshore Struct, 12(3), pp.599~609 (2017)
- Daniel, C., "Use of half-normal plots in interpreting factorial two-level experiments", Technometrics, 1, pp.311~341 (1959)
- Danielson, D. A., "Buckling of stiffened plates with bulb flat flanges", Int. J. Solid Struct, 41(22-23), pp.6407~6427 (2004)
- "Class Guideline DNVGL-CG-0128" (2015)[URL]
- Fujikubo, M., "Estimation of ultimate strength of continuous stiffened panel under combined transverse thrust and lateral pressure, part 2: continuous stiffened panel", Mar. Struct, 18, pp.411~427 (2005)
- Gordo, J. M., "Integrity of Offshore Structures-5" (1993)
- Grondin, G. Y., "Stiffened steel plates under compression and bending", J. Constr. Steel Res, 45(2), pp.125~148 (1998)
- IACS, "Common Structural Rules for Bulk Carriers and Oil Tankers", International Association of Classification Societies, ~ (2019)
- Khan, I., "Effects of welding-induced residual stress on ultimate strength of plates and stiffened panels", Ships Offshore Struct, 6(4), pp.297~309 (2011)
- Kim, D. K., "An empirical formulation for predicting the ultimate strength of stiffened panels subjected to longitudinal compression", Ocean Eng, 140, pp.270~280 (2017)
- Kim, D. K., "A technical review on ultimate strength prediction of stiffened panels in axial compression", Ocean Eng, 170, pp.392~406 (2018)
- Kleijnen, J. P. C., "Statistics and Simulation. IWS 2015. Springer Proceedings in Mathematics & Statistics, vol. 231" (2015), Springer
- Lin, Y. T., "Structural Longitudinal Ship Modelling", Ph.D, Naval Architecture and Ocean Engineering, pp.1985
- Montgomery, D. C., "Design and Analysis of Experiments" (2006), John Wiley & Sons, Inc.
- Morris, M. D., "Factorial sampling plans for preliminary computational experiments", Technometrics, 33, pp.161~174 (1991)
- Myers, R. H., "Response Surface Methodology: Process and Product Optimization Using Designed Experiments" (2016), Wiley & Sons
- Nevshupa, R., "The effect of environmental variables on early corrosion of highestrength lowealloy mooring steel immersed in seawater", Mar. Struct, 60, pp.226~240 (2018)
- Paik, J. K., "Empirical formulations for predicting the ultimate compressive strength of welded aluminum stiffened panels", Thin-Walled Struct, 45(2), pp.171~184 (2007)
- Paik, J. K., "Ultimate strength of aluminum plates and stiffened panels for marine applications", Mar. Technol, 41(3), pp.108~121 (2004)
- Paik, J. K., "Ultimate strength formulations for stiffened panels under combined axial load, in-plane bending and lateral pressure: a benchmark study", Thin-Walled Struct, 40(1), pp.45~83 (2002)
- Paik, J. K., "Methods for ultimate limit state assessment of ships and ship-shaped offshore structures : Part Idunstiffened plates", Ocean Eng, 35, pp.261~270 (2008)
- Paik, J. K., "Methods for ultimate limit state assessment of ships and ship-shaped offshore structures : Part II stiffened panels", Ocean Eng, 35, pp.271~280 (2008)
- Paik, J. K., "Methods for ultimate limit state assessment of ships and ship-shaped offshore structures : Part III hull girders", Ocean Eng, 35, pp.281~286 (2008)
- Paik, J. K., "An empirical formulation for predicting the ultimate compressive strength of stiffened panels", The 7th International Offshore and Polar Engineering Conference (ISOPE 1997)., pp.25~30 (1997)
- Paik, J. K., "Large deflection orthotropic plate approach to develop ultimate strength formulations for stiffened panels under combined biaxial compression", tension and lateral pressure, 2001, pp.39, 215~246
- Rahbar-Ranji, A., "Elastic buckling analysis of longitudinally stiffened plates with flat-bar stiffeners", Ocean Eng, 58, pp.48~59 (2013)
- Smith, C. S., "Influence of local compressive failure on ultimate longitudinal strength of a ship's hull", Practical Design of Ships and Other Floating Structures, pp.73~79 (1977), PRADS
- Woods, D. C., "Handbook of Uncertainty Quantification" (2015), Springer
- Xu, M. C., "Empirical formula for predicting ultimate strength of stiffened panel of ship structure under combined longitudinal compression and lateral loads", Ocean Eng, 162, pp.161~175 (2018)
- Yi, M. S., "Three-dimensional thermo-elastic-plastic finite element method modeling for predicting weld-induced residual stresses and distortions in steel stiffened-plate structures", World J. Eng. Technol, 6, pp.176~200 (2018)
- Zhang, S., "A review and study on ultimate strength of steel plates and stiffened panels in axial compression", Ships Offshore Struct, 11(1), pp.81~91 (2016)
- Zhang, S. M., "Buckling and ultimate capability of plates and stiffened panels in axial compression", Mar. Struct, 22(4), pp.791~808 (2009)