Comparative evaluation of the bond strength of self-adhering and bulk-fill flowable composites to MTA Plus, Dycal, Biodentine, and TheraCal: an in vitro study
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Objectives: This study aimed to compare the shear bond strength (SBS) of a self-adhering flowable composite (Dyad Flow) and a bulk-fill flowable composite (Smart Dentin Replacement [SDR]) to several pulp-capping materials, including MTA Plus, Dycal, Biodentine, and TheraCal. Materials and Methods: Eighty acrylic blocks with 2-mm-deep central holes that were 4 mm in diameter were prepared and divided into 2 groups (n = 40 each) according to the composite used (Dyad Flow or SDR). They were further divided into 4 sub-groups (n = 10 each) according to the pulp-capping agent used. SBS was tested using a universal testing machine at a crosshead speed of 1 mm/min. Data were analyzed using 2-way analysis of variance. A p value of < 0.05 was considered to indicate statistical significance. Results: A statistically significant difference (p = 0.040) was found between Dyad Flow and SDR in terms of bond strength to MTA Plus, Dycal, Biodentine, and TheraCal. Conclusions: Among the 8 sub-groups, the combination of TheraCal and SDR exhibited the highest SBS.
Abstract
Objectives: This study aimed to compare the shear bond strength (SBS) of a self-adhering flowable composite (Dyad Flow) and a bulk-fill flowable composite (Smart Dentin Replacement [SDR]) to several pulp-capping materials, including MTA Plus, Dycal, Biodentine, and TheraCal. Materials and Methods: Eighty acrylic blocks with 2-mm-deep central holes that were 4 mm in diameter were prepared and divided into 2 groups (n = 40 each) according to the composite used (Dyad Flow or SDR). They were further divided into 4 sub-groups (n = 10 each) according to the pulp-capping agent used. SBS was tested using a universal testing machine at a crosshead speed of 1 mm/min. Data were analyzed using 2-way analysis of variance. A p value of < 0.05 was considered to indicate statistical significance. Results: A statistically significant difference (p = 0.040) was found between Dyad Flow and SDR in terms of bond strength to MTA Plus, Dycal, Biodentine, and TheraCal. Conclusions: Among the 8 sub-groups, the combination of TheraCal and SDR exhibited the highest SBS.
참고문헌 (25)
- Ghoddusi J, "New approaches in vital pulp therapy in permanent teeth", Iran Endod J, 9, pp.15~22 (2014)
- Gandolfi MG, "Calcium silicate and calcium hydroxide materials for pulp capping: biointeractivity, porosity, solubility and bioactivity of current formulations", J Appl Biomater Funct Mater, 13, pp.43~60 (2015)
- Gandolfi MG, "Ion release, porosity, solubility, and bioactivity of MTA Plus tricalcium silicate", J Endod, 40, pp.1632~1637 (2014)
- Altunsoy M, "Shear bond strength of a self-adhering flowable composite and a flowable base composite to mineral trioxide aggregate, calcium-enriched mixture cement, and Biodentine", J Endod, 41, pp.1691~1695 (2015)
- Arandi NZ, "TheraCal LC : from biochemical and bioactive properties to clinical applications", Int J Dent, 2018, pp.3484653~ (2018)
- Cantekin K, "Evaluation of shear bond strength of two resin-based composites and glass ionomer cement to pure tricalcium silicate-based cement(Biodentine®)", J Appl Oral Sci, 22, pp.302~306 (2014)
- Czasch P, "In vitro comparison of mechanical properties and degree of cure of bulk fill composites", Clin Oral Investig, 17, pp.227~235 (2013)
- Serin BA, "Comparison of the shear bond strength of silorane-based composite resin and methacrylate based composite resin to MTA", J Dent Res Dent Clin Dent Prospect, 12, pp.1~5 (2018)
- Tuloglu N, "Shear bond strength of self-adhering flowable composite on dentin with and without application of an adhesive system", J Appl Biomater Funct Mater, 12, pp.97~101 (2014)
- Bucuta S, "Light transmittance and micro-mechanical properties of bulk fill vs. conventional resin based composites", Clin Oral Investig, 18, pp.1991~2000 (2014)
- Vichi A, "Bonding and sealing ability of a new self-adhering flowable composite resin in class I restorations", Clin Oral Investig, 17, pp.1497~1506 (2013)
- Sultana N, "Effect of acid etching on the micro-shear bond strength of resin composite-calcium silicate interface evaluated over different time intervals of bond aging", J Conserv Dent, 21, pp.194~197 (2018)
- Tunç EŞ, "The evaluation of bond strength of a composite and a compomer to white mineral trioxide aggregate with two different bonding systems", J Endod, 34, pp.603~605 (2008)
- Peterson J, "Bonding performance of self-adhesive flowable composites to enamel, dentin and a nano-hybrid composite", Odontology, 106, pp.171~180 (2018)
- Yesilyurt C, "In vitro bonding effectiveness of new self-adhering flowable composite to calcium silicate-based material", Dent Mater J, 33, pp.319~324 (2014)
- Doozaneh M, "Shear bond strength of self-adhering flowable composite and resin-modified glass ionomer to two pulp capping materials", Iran Endod J, 12, pp.103~107 (2017)
- Tyagi N, "The shear bond strength of MTA with three different types of adhesive systems : an in vitro study", J Conserv Dent, 19, pp.130~133 (2016)
- Shin JH, "Effect of mineral trioxide aggregate surface treatments on morphology and bond strength to composite resin", J Endod, 40, pp.1210~1216 (2014)
- Tulumbaci F, "Shear bond strength of different restorative materials to mineral trioxide aggregate and Biodentine", J Conserv Dent, 20, pp.292~296 (2017)
- Kaup M, "Shear bond strength of Biodentine, ProRoot MTA, glass ionomer cement and composite resin on human dentine ex vivo", Head Face Med, 11, pp.14~ (2015)
- 정화경, "Tricalcium Silicate-Based 치수복조재에 대한 수 종 수복재의 전단결합강도 비교", 대한소아치과학회지, 44(2), pp.200~209 (2017), 대한소아치과학회[DOI]
- Cantekin K, "Bond strength of different restorative materials to light-curable mineral trioxide aggregate", J Clin Pediatr Dent, 39, pp.143~148 (2015)
- Deepa VL, "Shear bond strength evaluation of resin composite bonded to three different liners: TheraCal LC, Biodentine, and resin-modified glass ionomer cement using universal adhesive: an in vitro study", J Conserv Dent, 19, pp.166~170 (2016)
- Alzraikat H, "Shear bond strength of a novel light cured calcium silicate based-cement to resin composite using different adhesive systems", Dent Mater J, 35, pp.881~887 (2016)
- Karadas M, "Evaluation of the bond strength of different adhesive agents to a resin-modified calcium silicate material(TheraCal LC)", Scanning, 38, pp.403~411 (2016)