Experimental study on multi-level overtopping wave energy convertor under regular wave conditions
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
A multi-level overtopping wave energy converter was designed according to the large tidal range and small wave heights in China. It consists of two reservoirs with sloping walls at different levels. The reservoirs share a common outflow duct and a low-head axial turbine. The experimental study was carried out in a laboratory wave-flume to investigate the overtopping performance of the device. The depth-gauges were used to measure the variation of the water level in the reservoirs. The data was processed to derive the time-averaged overtopping discharges. It was found that the lower reservoir can store wave waters at the low water level and break the waves which try to climb up to the upper reservoir. The upper sloping angle and the opening width of the lower reservoir both have significant effects on the overtopping discharges, which can provide more information to the design and optimization of this type of device.
Abstract
A multi-level overtopping wave energy converter was designed according to the large tidal range and small wave heights in China. It consists of two reservoirs with sloping walls at different levels. The reservoirs share a common outflow duct and a low-head axial turbine. The experimental study was carried out in a laboratory wave-flume to investigate the overtopping performance of the device. The depth-gauges were used to measure the variation of the water level in the reservoirs. The data was processed to derive the time-averaged overtopping discharges. It was found that the lower reservoir can store wave waters at the low water level and break the waves which try to climb up to the upper reservoir. The upper sloping angle and the opening width of the lower reservoir both have significant effects on the overtopping discharges, which can provide more information to the design and optimization of this type of device.
참고문헌 (36)
- Buccino, M., "Non breaking wave forces at the front face of seawave slotcone generators", Energies, 5, pp.4779~4803 (2012)[DOI]
- Buccino, M., "Nature and magnitude of wave loadings at seawave slot-cone generators", Ocean. Eng., 95, pp.34~58 (2015)[DOI]
- Chini, N., "Extreme values of coastal wave overtopping accounting for climate change and sea level rise", Coast. Eng., 65, pp.27~37 (2012)[DOI]
- Contestabile, P., "Prototype overtopping breakwater for wave energy conversion at Port of Naples", Proceedings of the 26th International Ocean and Polar Engineering Conference (2016)
- Contestabile, P., "Full-scale prototype of an overtopping breakwater for wave energy conversion", Conference on Coastal Engineering Proceedings, pp.1~12 (2017)
- Contestabile, P., "Wave loadings acting on innovative rubble mound breakwater for overtopping wave energy conversion", Coast. Eng., 122, pp.60~74 (2017)[DOI]
- J. Cruz, "Ocean Wave Energy - Current Status and Future Perspectives"
- Falcao, A.F.O., "Wave energy utilization: a review of the technologies", Renew. Sustain. Energy Rev., 14(3), pp.899~918 (2010)[DOI]
- Iuppa, C., "Hydraulic performance of an innovative breakwater for overtopping wave energy conversion", Sustainability (2016)[DOI]
- Sirirat Jungrungruengtaworn, "Influence of slot width on the performance of multi-stage overtopping wave energy converters", International Journal of Naval Architecture and Ocean Engineering, 9(6), pp.668~676 (2017), 대한조선학회
- Kofoed, J.P., "Wave Overtopping of Marine Structures: Utilization of Wave Energy" (2002)
- Kofoed, J.P., "Vertical distribution of wave overtopping for design of multi level overtopping based wave energy converters", 30th International Conference on Costal Engineering (2006)
- Kofoed, J.P., "Crest level optimization of the multi-level reservoir overtopping based wave energy converter Seawave Slot-cone Generator", Proceedings of the 6th European Wave & Tidal Conference (2005)
- Kofoed, J.P., "Experimental study of a multi level overtopping wave power device", Proceedings of the 10th Congress of International Maritime Association of the Mediterranean (2002)
- Lin, T.C., "An experimental observation of a solitary wave impingement run-up and overtopping on a sea wall", J. Hydrodyn., 24(1), pp.76~85 (2012)[DOI]
- Z. Liu, "A multi-level overtopping wave energy converter", Pat. Auth. No. CN2013 10590330.6, ~ (2014)
- Liu, Z., "Experimental Study on overtopping performance of a circular ramp wave energy converter", Renew. Energy, 104, pp.163~176 (2017)[DOI]
- Maliki, A.Y., "Comparison of numerical and experimental results for overtopping discharge of the OBREC wave energy converter", J. Eng. Sci. Technol., 12(5), pp.1337~1353 (2017)
- Margheritini, L., "SSG wave energy converter: design, reliability and hydraulic performance of an innovative overtopping device", Renew. Energy, 34, pp.1371~1380 (2009)[DOI]
- Mehmet, A.A., "Experimental study for the hydraulic efficiency of an overtopping type wave energy converter with a circular runup ramp", J. BAUN. Inst. Sci. Technol., 19(1), pp.118~131 (2017)
- Ministry of Transport of the People's Republic of China, "Code of Design and Construction of Breakwaters, JTS-154-1-2011", ~ (2012)
- Norgaard, J.Q.H., "Analysis of overtopping flow on sea dikes in oblique and short-crested waves", Coast. Eng., 76, pp.43~54 (2013)[DOI]
- Orszaghova, J., "Importance of second-order wave generation for focused wave group run-up and overtopping", Coast. Eng., 94, pp.63~79 (2014)[DOI]
- Palma, G., "Design optimization of a multifunctional wave energy device", Proceedings of the 2nd International Conference on Renewable Energies Offshore (2016)
- Romano, A., "Uncertainties in the physical modelling of the wave overtopping over a rubble mound breakwater: the role of the seeding number and of the test duration", Coast. Eng., 103, pp.15~21 (2015)[DOI]
- Tanaka, H., "Characteristics of volume of overtopping and water supply quantity for developing wave overtopping type wave power generation equipment", Proceedings of the 25th International Ocean and Polar Engineering Conference (2015)
- Tanaka, H., "Researches and developments of wave overtopping type wave power generation", Proceedings of the 26th International Ocean and Polar Engineering Conference (2016)
- Tjugen, K.J., "TAPCHAN ocean wave energy project at Java: updated project status", Proceedings of 2nd European Wave Tidal Energy Conference, pp.42~43 (1995)
- Tonelli, M., "Numerical simulation of wave overtopping at coastal dikes and low-crested structures by means of a shock-capturing Boussinesq model", Coast. Eng., 79, pp.75~88 (2013)[DOI]
- Van Der Meer, J.W., "Wave run-up and wave overtopping at dikes", Am. Soc. Civ. Eng., 12(2), pp.175~189 (1994)
- Vicinanza, D., "Wave pressure acting on a seawave slot-cone generator", Coast. Eng., 55, pp.553~568 (2008)[DOI]
- Vicinanza, D., "The SSG wave energy converter: performance, status and Recent Developments", Energies, 5, pp.193~226 (2012)[DOI]
- Vicinanza, D., "Innovative rubble mound breakwaters for overtopping wave energy conversion", Coast. Eng., 88, pp.154~170 (2014)[DOI]
- Williams, H.E., "The role of offshore boundary conditions in the uncertainty of numerical prediction of wave overtopping using non-linear shallow water equations", Coast. Eng., 89, pp.30~44 (2014)[DOI]
- Working Group on Wave Energy Conversion, "Wave Energy Conversion. Elsevier Ocean Engineering Book Series, vol. 6" (2003), Elsevier Ltd
- Xue, Y., "Experimental study of dam-break flow in cascade reservoirs with steep bottom slope", J. Hydrodyn., 23(4), pp.491~497 (2011)[DOI]
