Theoretical investigation about the hydrodynamic performance of propeller in oblique flow
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This paper establishes an iterative calculation model for the hydrodynamic performance of propeller in oblique flow based on low order potential based surface panel method. The hydrodynamic performance of propeller is calculated through panel method which is also used to calculate the induced velocity. The slipstream of propeller is adjusted according to the inflow velocity and the induced velocity. The oblique flow is defined by the axial inflow velocity and the incident angle. The calculation results of an instance show that the thrust and torque of propeller decrease with the increase of axial inflow velocity but increase with the incident angle. The unsteadiness of loads on the propeller blade surface gets more intensified with the increases of axial inflow velocity and incident angle. However, comparing with the effect of axial inflow velocity on the unsteadiness of the hydrodynamic performance of propeller, the effect of the incident angle is more remarkable.
Abstract
This paper establishes an iterative calculation model for the hydrodynamic performance of propeller in oblique flow based on low order potential based surface panel method. The hydrodynamic performance of propeller is calculated through panel method which is also used to calculate the induced velocity. The slipstream of propeller is adjusted according to the inflow velocity and the induced velocity. The oblique flow is defined by the axial inflow velocity and the incident angle. The calculation results of an instance show that the thrust and torque of propeller decrease with the increase of axial inflow velocity but increase with the incident angle. The unsteadiness of loads on the propeller blade surface gets more intensified with the increases of axial inflow velocity and incident angle. However, comparing with the effect of axial inflow velocity on the unsteadiness of the hydrodynamic performance of propeller, the effect of the incident angle is more remarkable.
참고문헌 (22)
- Amini, H., "Experimental and theoretical analysis of propeller shaft loads in oblique inflow", J. Ship Res, 55(4), pp.1~21 (2011)
- Amini, H., "Theoretical and experimental investigation of propeller shaft loads in transient conditions", Int. Shipbuild. Prog, 59(1), pp.55~82 (2012)
- Coraddu, A., "Analysis of twin screw ships'asymmetric propeller behaviour by means of free running model tests", Ocean Eng, 68(4), pp.47~64 (2013)
- Dubbioso, G., "Anasazis of the performance of a marine propeller operating in oblique flow", Comput. Fluids, 75, pp.86~102 (2013)
- Dubbioso, G., "Analysis of a marine propeller operating in oblique flow, Part 2: very high incidence angles", Comput. Fluids, 92(9), pp.56~81 (2014)
- Dubbioso, G., "Analysis of propeller bearing loads by CFD. Part 1: straight ahead and steady turning maneuvers", Ocean Eng, 130, pp.241~259 (2017)
- Hou, L. X., "Wake-adapted design of fixed guide vane type energy saving device for marine propeller", Ocean Eng, 110, pp.11~17 (2015)
- Hsin, C. Y., "Development and Analysis of Panel Methods for Propellers in Unsteady Flow", Ph.D, pp.1990
- Jessup, S. D., "An Experimental Investigation of Viscous Aspects of Propeller Blade Flow", Ph.D, pp.1989
- Kang, D., "Mathematical model of singlepropeller twin-rudder ship", J. Mar. Sci. Technol, 13(3), pp.207~222 (2008)
- Khanfir, S., "Manoeuvring characteristics of twin-rudder systems : rudder-hull interaction effect on the manoeuvrability of twin-rudder ships", J. Mar. Sci. Technol, 16(4), pp.472~490 (2011)
- Krasilnikov, V., "Analysis of unsteady propeller blade forces by RANS", Proceeding of the First International Sysmposium on Marine Propulsors, pp.22~24 (2009)
- Lee, H., "Unsteady wake alignment for propellers in nonaxisymmetric flows", J. Ship Res, 49(3), pp.176~190 (2005)
- Ortolani, F., "Investigation of the radial bearing force developed during actual ship operations, Part 1: straight ahead sailing and turning maneuvers", Ocean Eng, 94, pp.67~87 (2015)
- Ortolani, F., "Investigation of the radial bearing force developed during actual ship operations, Part 2: unsteady maneuvers", Ocean Eng, 106, pp.424~445 (2015)
- Politis, G. K., "Simulation of unsteady motion of a propeller in a fluid including free wake modeling", Eng. Anal. Bound. Elem, 28(6), pp.633~653 (2004)
- Reza Shamsi, "Numerical investigation of yaw angle effects on propulsive characteristics of podded propulsors", International Journal of Naval Architecture and Ocean Engineering, 5(2), pp.287~301 (2013), 대한조선학회
- Shamsi, R., "Determining the hydrodynamic loads of the marine propeller forces in oblique flow and off-design condition", Iran. J. Sci. Technol. Trans. Mech. Eng, 11, pp.1~7 (2016)
- Stettler, J. W., "Steady and Unsteady Dynamics of an Azimuthing Podded Propulsor Related to Vehicle Maneuvering", Ph.D, pp.2004
- Viviani, M., "Analysis of asymmetrical shaft power increase during tight manoeuvres", FAST 2007-9th International Conference on Fast Sea Transportation (2007)
- Xiong, Y., "Hydrodynamics performance of podded propulsion at declination angles", J. Shanghai Jiao Tong Univ. (Sci.), 47(6), pp.956~961 (2013)
- Jianxi Yao, "Investigation on hydrodynamic performance of a marine propeller in oblique flow by RANS computations", International Journal of Naval Architecture and Ocean Engineering, 7(1), pp.56~69 (2015), 대한조선학회