Numerical analysis of unsteady hydrodynamic performance of pump-jet propulsor in oblique flow
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
In this study, the SST k u turbulence model and the sliding mesh technology based on RANS method have been adopted to simulate the exciting force and hydrodynamic of a pump-jet propulsor in different oblique inflow angle (0, 10, 20, 30) and different advance ratio (J ¼ 0.95, J ¼ 1.18, J ¼ 1.58).The fully structured grid and full channel model have been adopted to improved computational accuracy. The classical skewed marine propeller E779A with different advance ratio was carried out to verify the accuracy of the numerical simulation method. The grid independence was verified. The time-domain data of pump-jet propulsor exciting force including bearing force and fluctuating pressure in different working conditions was monitored, and then which was converted to frequency domain data by fast Fourier transform (FFT). The variation laws of bearing force and fluctuating pressure in different advance ratio and different oblique flow angle has been presented. The influence of the peak of pulsation pressure in different oblique flow angle and different advance ratio has been presented. The results show that the exciting force increases with the increase of the advance ratio, the closer which is to the rotor domain and the closer to the blades tip, the greater the variation of the pulsating pressure. At the same time, the exciting force decrease with the oblique flow angle increases. And the vertical and transverse forces will change more obviously, which is the main cause of the exciting force. In addition, the pressure distribution and the velocity distribution of rotor blades tip in different oblique flow angles has been investigated.
Abstract
In this study, the SST k u turbulence model and the sliding mesh technology based on RANS method have been adopted to simulate the exciting force and hydrodynamic of a pump-jet propulsor in different oblique inflow angle (0, 10, 20, 30) and different advance ratio (J ¼ 0.95, J ¼ 1.18, J ¼ 1.58).The fully structured grid and full channel model have been adopted to improved computational accuracy. The classical skewed marine propeller E779A with different advance ratio was carried out to verify the accuracy of the numerical simulation method. The grid independence was verified. The time-domain data of pump-jet propulsor exciting force including bearing force and fluctuating pressure in different working conditions was monitored, and then which was converted to frequency domain data by fast Fourier transform (FFT). The variation laws of bearing force and fluctuating pressure in different advance ratio and different oblique flow angle has been presented. The influence of the peak of pulsation pressure in different oblique flow angle and different advance ratio has been presented. The results show that the exciting force increases with the increase of the advance ratio, the closer which is to the rotor domain and the closer to the blades tip, the greater the variation of the pulsating pressure. At the same time, the exciting force decrease with the oblique flow angle increases. And the vertical and transverse forces will change more obviously, which is the main cause of the exciting force. In addition, the pressure distribution and the velocity distribution of rotor blades tip in different oblique flow angles has been investigated.
참고문헌 (22)
- 안상준, "Numerical investigation of a pump-jet with ring rotor using an unstructured mesh technique", Journal of Mechanical Science and Technology, 29(7), pp.2897~2904 (2015), 대한기계학회
- Alimirzazadeh, S., "Unsteady RANS simulation of a surface piercing propeller in oblique flow", Appl. Ocean Res, 56, pp.79~91 (2016)
- Amini, H., "Experimental and theoretical analysis of propeller shaft loads in oblique inflow", J. Ship Res, 55(4), pp.1~21 (2011)
- Dubbioso, G., "Analysis of a marine propeller operating in oblique flow", Comput. Fluid, 75, pp.86~102 (2013)
- Dubbioso, G., "Analysis of a marine propeller operating in oblique flow. Part 2: very high incidence angles", Comput. Fluids, 92, pp.56~81 (2014)
- Felli, M., "Propeller wake evolution mechanisms in oblique flow conditions", J. Fluid Mech, 845, pp.520~559 (2018)
- Ji, B., "Numerical investigation of unsteady cavitating turbulent flow around a full scale marine propeller", Proceedings of the 9th International Conference on Hydrodynamics (2010), Elsevier
- Lin Lu, "CFD prediction and simulation of a pumpjet propulsor", International Journal of Naval Architecture and Ocean Engineering, 8(1), pp.110~116 (2016), 대한조선학회
- Lin Lu, "Numerical simulation of tip clearance impact on a pumpjet propulsor", International Journal of Naval Architecture and Ocean Engineering, 8(3), pp.219~227 (2016), 대한조선학회
- Lin Lu, "Numerical investigations of tip clearance flow characteristics of a pumpjet propulsor", International Journal of Naval Architecture and Ocean Engineering, 10(3), pp.307~317 (2018), 대한조선학회
- Martioa, J., "Open and ducted propeller virtual mass and damping coefficients by URANS-method in straight and oblique flow", Ocean. Eng, 130, pp.92~102 (2017)
- Menter, F. R., "Zonal Two Equation K-w Turbulence Models for Aerodynamic Flows", pp.93~2906 (1993), AIAA
- Morgut, M., "Influence of grid type and turbulence model on the numerical prediction of the flow around marine propellers working in uniform inflow", Ocean Eng, 42, pp.26~34 (2012)
- Motallebi-Nejad, M., "Numerical analysis of ducted propeller and pumpjet propulsion system using periodic computational domain", J. Mar. Sci. Technol, 22, pp.559~573 (2017)
- Pan, G., "Numerical simulation of unsteady cavitating flows of pumpjet propulsor", Ships Offshore Struct, 11(1), pp.64~74 (2016)
- Huang, Q., "Numerical investigation of different tip clearances effect on the hydrodynamic performance of pump-jet propulsor", Int. J. Comput. Methods, 15(5) (2018)
- Salvatore, F., "Theoretical Modeling of Unsteady Cavitation and Induced Noise", Sixth International Symposium on Cavitation, CAV2006 (2006)
- Subhas, S., "CFD analysis of a propeller flow and cavitation", Int. J. CA, 55, pp.26~33 (2012)
- Ch. Suryanarayana, "Experimental evaluation of pumpjet propulsor for an axi-symmetric body in wind tunnel", International Journal of Naval Architecture and Ocean Engineering, 2(1), pp.24~33 (2010), 대한조선학회
- Ch. Suryanarayana, "Performance evaluation of an underwater body and pumpjet by model testing in cavitation tunnel", International Journal of Naval Architecture and Ocean Engineering, 2(2), pp.57~67 (2010), 대한조선학회
- Ch. Suryanarayana, "Cavitation studies on axi-symmetric underwater body with pumpjet propulsor in cavitation tunnel", International Journal of Naval Architecture and Ocean Engineering, 2(4), pp.185~194 (2010), 대한조선학회
- Wang, C., "Numerical analysis of propeller exciting force in oblique flow", J. Mar. Sci. Technol, 22, pp.602~619 (2017)