A new fatigue crack growth model considering underloads and overloads history together with stress ratio
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The estimation of fatigue crack growth for a ship structure is a complicated subject, especially when loads vary. Several researchers studied fatigue crack growth under varying loads with simple block loads, and many models have been proposed. More research is required to properly evaluate the storm loads, representing complex actual loads a vessel experience on the sea. This study proposes a new simple fatigue crack growth model that incorporates only two parameters of the stress ratio factor and the load history factor taking account of the underload effects using empirical data in the literature. The procedures for formula modification and optimum model selection are introduced. The new model is optimized and validated by comparing it with several simple block load tests and existing fatigue crack growth models. Generally, the new model shows competitiveness and a good agreement with the experiment results. The proposed model is expected to be a potential solution, with a simple formula, to estimate fatigue crack growth under variable loads including the storm loads.
Abstract
The estimation of fatigue crack growth for a ship structure is a complicated subject, especially when loads vary. Several researchers studied fatigue crack growth under varying loads with simple block loads, and many models have been proposed. More research is required to properly evaluate the storm loads, representing complex actual loads a vessel experience on the sea. This study proposes a new simple fatigue crack growth model that incorporates only two parameters of the stress ratio factor and the load history factor taking account of the underload effects using empirical data in the literature. The procedures for formula modification and optimum model selection are introduced. The new model is optimized and validated by comparing it with several simple block load tests and existing fatigue crack growth models. Generally, the new model shows competitiveness and a good agreement with the experiment results. The proposed model is expected to be a potential solution, with a simple formula, to estimate fatigue crack growth under variable loads including the storm loads.
참고문헌 (52)
- "ASTM-E647, Standard Test Method for Measurement of Fatigue Crack Growth Rates", American Society for Testing and Materials, ~ (2013)
- Bowen, Wang, "Curved fatigue crack growth prediction under variable amplitude loading by artificial neural network", Int. J. Fatig, 142 (2021)
- Boyce, B. L., "Effect of load ration and maximum stress intensity on the fatigue threshold in Tie6Ale4V", Eng. Fract. Mech, 68 (2001)
- "BS7910, Guide to Methods for Assessing the Acceptability of Flaws in Metallic Structures", British Standards, ~ (2013)
- Chahardehi, A., "Fatigue crack growth under remote and local compression - a state-of-the-art review", Frat. Ed. Integrita Strutt, 35, pp.41~49 (2016)
- Chang, J. B., "Improved damage-tolerance analysis methodology", J. Aircraft, 21 (1984)
- Dawicke, D. S., "Overload and underload effects on the fatigue crack growth behavior of the 2024-T3 aluminum alloy", NASA CR-201668, ~ (1997)
- Dinda, S., "Correlation and prediction of fatigue crack growth for different R-ratios using Kmax and DKþ parameters", Eng. Fract. Mech, 71, pp.1779~1790 (2004)
- Ding, J., "Effects of stress ratio and temperature on fatigue growth in a Tie6Ale4V alloy", Int. J. Fatig, 27, pp.1551~1558 (2005)
- Dowling, N. E., "Mechanical Behavior of Materials", pp.574~581 (2013), Pearson
- Dubey, S., "An investigation of the effects of stress ratio and crack closure on the micro-mechanisms of fatigue crack growth in Tie6Ale4V", Acta Mater, 45 (1997)
- Eason, E. D., "Technical basis for a revised fatigue crack growth rate reference curve for ferritic steels in air", J. Pressure Vessel Technol, 114, pp.80~86 (1992)
- Elber, W., "Fatigue crack closure under cyclic tension", Eng. Fract. Mech, 2, pp.37~45 (1970)
- Forman, R. G., "Study of fatigue crack initiation from flaws using fracture mechanics theory", Eng. Fract. Mech, 4, pp.333~345 (1972)
- A Generalized Development of Yield Zone Models, "Gallagher, J. P.", ~, pp.TM-74-28-FBR (1974)
- Garbatov, Y., "ISSC 2018 Report III_2 Fatigue and Fracture", pp.480~488 (2018), IOS Press
- Hao, Gong, "An improved prediction model on fatigue crack growth rate under variable amplitude loads for metallic materials", J. Mater. Eng. Perform (2021)
- AFGROW Users Guide and Technical Manual, "Harter, J. A.", Air Force Research Laboratory, ~, pp.Report No. AFRL-VAWP-1999-3016 (1999)
- Hongxun, Wang, "Experimental investigation of overload effects on fatigue crack growth behaviour of 7050-T7451 aluminium alloy", Fatig. Fract. Eng. Mater. Struct, 43 (2020)
- Huang, X. P., "Improved modeling of the effect of R-ratio on crack growth rate", Int. J. Fatig, 29, pp.591~602 (2007)
- Huang, X. P., "An engineering model of fatigue crack growth under variable", Int. J. Fatig, 30, pp.2~10 (2008)
- Requirements Concerning Materials and Welding, W11, "IACS", Internaltional Association of Classification Societies, ~ (2020)
- Kujawski, D., "A fatigue crack driving force parameter with load ratio effects", Int. J. Fatig, 23, pp.239~246 (2001)
- Kujawski, D., "A new (DKþ Kmax) 0.5 driving force parameter for crack growth in aluminum alloys", Int. J. Fatig, 23, pp.733~740 (2001)
- Kujawski, D., "Enhanced model of partial crack closure for correlation of Rratio effects in aluminum alloys", Int. J. Fatig, 23, pp.172~183 (2001)
- Maljaars, J., "Load sequence effects in fatigue crack growth of thick-walled welded CeMn steel members", Int. J. Fatig, 79, pp.10~ (2015)
- McEvily, A. J., "On the threshold for fatigue-crack growth", 4th International Conference of Fracture, 2, pp.1293~1298 (1977)
- McMillan, J. C., "Fatigue Crack Propagation under Programmed and Random Loads, BSRL Document Dl-82-0553", Also ASTM STP415, ~ (1966)
- Meggiolaro, M. A., "Comparison of Load Interaction Models in Fatigue Crack Propagation", 16th Brazilian Congress of Mechanical Engineering (2001)
- Menghan, Li, "Fatigue crack growth prediction model under variable amplitude loading conditions", Int. J. Damage Mech, 30(9) (2021)
- Newman, J. R., "Prediction fatigue crack growth under variable amplitude and spectrum loading using a closure model", ASTM STP 761, 255~277 (1982)
- A Fatigue Crack Growth Structural Analysis Program, "Newman, J. R.", ~, pp.NASA Technical Momorandum, 04159 (1992)
- Fatigue Analyses under Constant and Variable Amplitude Loading Using Small-Crack Theory, "Newman Jr., J.C.", ~, pp.NASA Technical Momorandum, 209329 (1999)
- Noroozi, A. H., "A two parameter driving force for fatigue crack growth analysis", Int. J. Fatig, 27, pp.1277~ (2005)
- Osawa, N., "FASTRAN II Simulation of SR219 ‘Storm Model’ FCG Tests", ~ (2019)
- Paris, P. C., "A critical analysis of crack propagation laws", J. Basic Eng. D, 85, pp.528~534 (1963)
- Paris, P. C., "Service load fatigue damage e a historical perspective", Int. J. Fatig, 21, pp.S35~S46 (1999)
- Porter, T. R., "Method of analysis and prediction for variable amplitude", Eng. Fract. Mech, 4 (1972)
- Ray, A., "Fatigue crack growth under variable amplitude loading: Part II-Code development and model validation", Appl. Math. Model, 25, pp.995~1013 (2001)
- Ray, A., "Fatigue crack growth under variable amplitude loading: Part I - model formulation in state space setting", Appl. Math. Model, 25, pp.979~994 (2001)
- Rossum, G. V., "The python Language Reference Manual" (2011), Network Theory Ltd
- Servetti, G., "Predicting fatigue crack growth rate in a welded butt joint: the role of effective R ratio in accounting for residual stress effect", Eng. Fract. Mech, 76, pp.1589~1602 (2009)
- Stephens, R. I., "Fatigue crack growth with negative stress ratio following single overloads in 2024-T3 and 7075-T6 aluminium alloys", ASTM STP 595, 172~183 (1976)
- Sumi, Y., "Fatigue crack propagation in marine structures under seaway loading", Int. J. Fatig, 58, pp.218~224 (2014)
- Tomita, Y., "Stochastic characteristic of long term distribution of wave induced loading and simulation method for fatigue strength analysis of ship structural member", J. Soc. Nav. Archit. Jpn, 177, pp.381~390 (1995)
- Tomita, Y., "Study on fatigue design load for ships based on crack growth analysis", ASTM STP 1439, 420~434 (2002)
- Toyosada, M., "Fatigue crack propagation for a through thickness crack: a crack propagation law considering cyclic plasticity near the crack tip", Int. J. Fatig, 26, pp.983~992 (2004)
- Walker, K., "The Effect of Stress Ratio during Crack Propagation and Fatigue for 2024-T3 and 7075-T6 Aluminum", ASTM STP462, ~ (1970)
- Wenjie, Tu, "Fatigue crack propagation behavior of high-strength steel under variable amplitude loading", Eng. Fract. Mech, 247 (2021)
- Wheeler, O. E., "Spectrum loading and crack growth, basic engng", Trans ASME, 94(1), pp.181~186 (1972)
- Willenborg, J. D., "A crack growth retardation model using an effective stress concept", AFFDL-TM-71-1-FBR, ~ (1971)
- Zheng, J., "Effect of stress ratio and test methods on fatigue crack growth rate for nickel based superalloy Udimet 720", Internationl Journal of Fatigue, 21 (1999)