본문 바로가기
KERD
논문KCI 등재

Analysis of biaxial proportional low-cycle fatigue and biaxial accumulative plasticity of hull inclined-crack plate

1

조회

0

다운로드

0

인용

0

참고문헌

키워드

주제분류조선공학

초록

Fracture induced failure of plates in hull structures subjected to in-plane biaxial low-cycle fatigue loading are generally a combination of accumulative plasticity and biaxial low-cycle fatigue damage. A biaxial low-cycle fatigue crack growth analysis of a hull structure that accounts for the accumulative plasticity effect can be suitable for the actual evaluation of the overall fracture induced failure of the hull structure in severe sea conditions. An analytical model of biaxial low-cycle fatigue crack propagation with a control parameter for the J integral was presented for hull inclined-crack plate. The test was conducted for cruciform specimens made of Q235 steel with an inclined crack to validate the presented analysis. The biaxial accumulative plasticity behaviour and the effects of the biaxiality and stress ratios were investigated by numerical analysis. The results of this study reveal a strong dependence of biaxial low-cycle fatigue crack propagation on biaxial accumulated plasticity.

Abstract

Fracture induced failure of plates in hull structures subjected to in-plane biaxial low-cycle fatigue loading are generally a combination of accumulative plasticity and biaxial low-cycle fatigue damage. A biaxial low-cycle fatigue crack growth analysis of a hull structure that accounts for the accumulative plasticity effect can be suitable for the actual evaluation of the overall fracture induced failure of the hull structure in severe sea conditions. An analytical model of biaxial low-cycle fatigue crack propagation with a control parameter for the J integral was presented for hull inclined-crack plate. The test was conducted for cruciform specimens made of Q235 steel with an inclined crack to validate the presented analysis. The biaxial accumulative plasticity behaviour and the effects of the biaxiality and stress ratios were investigated by numerical analysis. The results of this study reveal a strong dependence of biaxial low-cycle fatigue crack propagation on biaxial accumulated plasticity.

참고문헌 (40)

  1. Ackermann, Stephanie, "Biaxial in-phase and out-of-phase cyclic deformation and fatigue behavior of an austenitic TRIP steel", Int. J. Fatig, 67, pp.123~133 (2014)
  2. Ackermann, Stephanie, "Biaxial in-phase and out-of-phase cyclic deformation and fatigue behavior of an austenitic TRIP steel", Int. J. Fatig, 67, pp.123~133 (2014)
  3. Albinmousa, J., "Multiaxial effects on LCF behaviour and fatigue failure of AZ31B magnesium extrusion", Int. J. Fatig, 67, pp.103~116 (2014)
  4. Baptista, R., "Optimization of cruciform specimens for biaxial fatigue loading with direct multi search", Theor. Appl. Fract. Mech, 80, pp.65~72 (2015)
  5. Carpinteri, A., "On the use of the Prismatic Hull method in a critical plane-based multiaxial fatigue criterion", Int. J. Fatig, 68, pp.159~167 (2014)
  6. Chaboche, J. L., "Constitutive modeling of ratcheting effects 1.Experimental facts and properties of the classical models", J. Eng. Mater. Technol. Trans. ASME, 111(4), pp.384~392 (1989)
  7. Dai, P., "Effects of the transverse stress on biaxial fatigue crack growth predicted by plasticity-corrected stress intensity factor", Int. J. Fatig, 61, pp.101~106 (2014)
  8. Datta, Siddhant, "Fatigue crack propagation under biaxial fatigue loading with single overloads", Int. J. Fatig, 109, pp.103~113 (2018)
  9. Deng, Junlin, "Research on CTOD for low-cycle fatigue analysis of central-through cracked plates considering accumulative plastic strain", Eng. Fract. Mech, 154(3), pp.128~139 (2016)
  10. Deng, J. L., "Low-cycle fatigue crack initiation life of hullnotched plate considering short crack effect and accumulative plastic damage", Appl. Ocean Res, 68, pp.65~76 (2017)
  11. Deng, Junlin, "Analysis of biaxial non-proportional low-cycle fatigue crack propagation behaviour of hull plate with an inclined crack based on accumulative plasticity", J. Fail. Anal. Prev, 21(4), pp.1345~1361 (2021)
  12. Foletti, S., "Short cracks growth in low-cycle fatigue under multiaxial in-phase loading", Int. J. Fatig, 107, pp.49~59 (2018)
  13. Fujita, Yuzuru, "The assessment of ship structure deformation under tension-compression of the cyclic loading", Bull. Soc. Naval Archit. Jpn, 12, pp.346~354 (1984)
  14. Gotoh, Koji, "Numerical simulation of fatigue crack propagation under biaxial tensile loadings with phase differences", Mar. Struct, 42, pp.53~70 (2015)
  15. Han, Qinghua, "Low-cycle multiaxial fatigue behavior and life prediction of Q235B steel welded material", Int. J. Fatig, 127, pp.417~430 (2019)
  16. He, Wentao, "Effect of single tensile overload on fatigue crack growth behavior based on plastically dissipated energy and critical distance theory", Eng. Fract. Mech, 223, pp.1~17 (2020)
  17. Hoshide, T., "Mechanics of mixed model small fatigue crack growth", Eng. Fract. Mech, 26(6), pp.841~850 (1987)
  18. Kamaya, Masayuki, "Low-cycle fatigue crack growth prediction by strain intensity factor", Int. J. Fatig, 72, pp.80~89 (2015)
  19. Kapoor, A., "A re-evaluation of the life to rupture of ductile metals by cyclic plastic strain", Fatig. Fract. Eng. Mater. Struct, 17(2), pp.201~219 (1994)
  20. Lee, E. U., "Fatigue behavior of aluminum alloys under biaxial loading", Eng. Fract. Mech, 78, pp.1555~1564 (2011)
  21. Lieshout, P. S. V., "Validation of the corrected Dang Van multiaxial fatigue criterion applied to turret bearings of FPSO offloading buoys", Ships Offshore Struct, 12(4), pp.521~529 (2016)
  22. Lieshout, P. S. V., "Comparative study of multiaxial fatigue methods applied to welded joints in marine structures", Frat. Ed. Integrit"a Strutt, 10(37), pp.173~192 (2016)
  23. Lopez-Crespo, P., "Study of crack orientation and fatigue life prediction in biaxial fatigue with critical plane models", Eng. Fract. Mech, 136, pp.115~130 (2015)
  24. Mall, S., "Crack growth behavior under biaxial fatigue with phase difference", Int. J. Fatig, 74, pp.166~172 (2015)
  25. McClung, R. C., "Fatigue and Fracture Mechanics: 27th Volume", pp.317~337 (1997), ASTM International
  26. Meng, Yuxian, "Effects of phase difference and stress ratio on biaxial tensionetension fatigue crack propagation behavior of rolled ZK60 magnesium alloy", Mater. Today Commun, 24, pp.101~109 (2020)
  27. Misak, H., "Crack growth behavior of 7075-T6under biaxial tensionetension fatigue", Int. J. Fatig, 55, pp.158~165 (2013)
  28. Misak, H. E., "Biaxial tensionetension fatigue crack growth behavior of 2024-T3 under ambient air and salt water environments", Eng. Fract. Mech, 118, pp.83~97 (2014)
  29. Perel, V. Y., "Biaxial fatigue crack growth behavior in aluminum alloy 5083-H116 under ambient laboratory and saltwater environments", J. Mater. Eng. Perform, 24, pp.1565~1572 (2015)
  30. Qu, Weilian, "Multiaxial cycle deformation and lowcycle fatigue behavior of mild carbon steel and related welded-metal specimen", Adv. Mater. Sci. Eng, 13(2), pp.1~12 (2017)
  31. Satyadevi, A., "A new failure criterion for materials exhibiting ratcheting during very low cycle fatigue", Mater. Sci. Eng, pp.452~453 (2007)
  32. Scalet, G., "A convex hull-based approach for multiaxial high-cycle fatigue criteria", Fatig. Fract. Eng. Mater. Struct, 44, pp.14~27 (2021)
  33. Shamsaei, N, "Multiaxial Fatigue and Deformation Including Non-proportional Hardening and Variable Amplitude Loading Effects", pp.2010
  34. Socie, D. F., "Biaxial Fatigue of Inconel 718 Including Mean Stress Effects", Multiaxial Fatigue, 463~481 (1985)
  35. Szusta, J., "Low-cycle fatigue model of damage accumulation-the strain approach", Eng. Fract. Mech, 77(10), pp.1604~1616 (2010)
  36. Takahashi, I., "Fatigue behavior of a box-welded joint under biaxial cyclic loads", Fatig. Fract. Eng. Mater. Struct, 22(10), pp.869~877 (1999)
  37. Tchankov, Dimitar, "Crack opening displacement approach to assess multiaxial low cycle fatigue", Int. J. Fatig, 30, pp.417~425 (2008)
  38. Tong, J., "Ratcheting strain as a driving force for fatigue crack growth", Int. J. Fatig, 46, pp.49~57 (2013)
  39. Wang, X., "Fully plastic J-integral solutions for surface cracked plates under biaxial loading", Eng. Fract. Mech, 73, pp.1581~1595 (2006)
  40. Zheng, X., "Numerical modeling of fatigue crack propagation based on the theory of critical distances", Eng. Fract. Mech, 114, pp.151~165 (2013)

관련 논문AI추천

이 간행물의 다른 논문 (70건)