Performance analysis of passive heave compensator operated with inclined piston using analytical method
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
When performing operations such as drilling in the ocean, floating platforms undergo vertical motion due to waves, which negatively impacts these operations. So passive heave compensator(PHC) is used to counteract it. In many studies, the analysis of PHC with pneumatic springs has been done. Some of these papers analyzed it using simple second-order differential equations, but there was no case of modeling considering the pneumatic spring installed tilted in the PHC. On the other hand, in some papers, the characteristics were analyzed by numerical methods using multi-body dynamics equations, and it is time consuming. Therefore, in this paper, a second-order ordinary differential equation modeling method for PHC with an inclined pneumatic spring was presented and verified by comparison with the numerical method. Using the model presented in this paper, it is possible to analyze as accurate as conventional analytical methods, and to analyze characteristics faster than numerical methods.
Abstract
When performing operations such as drilling in the ocean, floating platforms undergo vertical motion due to waves, which negatively impacts these operations. So passive heave compensator(PHC) is used to counteract it. In many studies, the analysis of PHC with pneumatic springs has been done. Some of these papers analyzed it using simple second-order differential equations, but there was no case of modeling considering the pneumatic spring installed tilted in the PHC. On the other hand, in some papers, the characteristics were analyzed by numerical methods using multi-body dynamics equations, and it is time consuming. Therefore, in this paper, a second-order ordinary differential equation modeling method for PHC with an inclined pneumatic spring was presented and verified by comparison with the numerical method. Using the model presented in this paper, it is possible to analyze as accurate as conventional analytical methods, and to analyze characteristics faster than numerical methods.
참고문헌 (22)
- Aker kvaerner MH - anno 2008 Presented at NFLB Vinterkonferansen 2008, "Aker Kvaerner, M. H.", Aker Kvaerner, ~ (2008)
- Albers, P., "Motion Control in Offshore and Dredging" (2010), Springer
- Chen, H., "Position control of heave compensation for offshore cranes based on a particle swarm optimized model predictive trajectory path controller", J. Mar. Sci. Eng, 10(10), pp.1427~ (2022)[DOI]
- Do, K. D., "Nonlinear control of an active heave compensation system", Ocean Eng, 35(5–6), pp.558~571 (2008)[DOI]
- Featherstone, R., "Rigid Body Dynamics" (2008), Springer
- Ham, S. -H., "Time-domain structural analysis during block turnover and lifting using 2D flexible multibody dynamics", Mar. Struct, 75, pp.102841~ (2021)[DOI]
- Hatleskog, J. T., "Heave compensation simulation for noncontact operations in deep water", OCEANS 2006, pp.1~6 (2006)
- Huster, A., "Design and operational performance of a standalone passive heave compensation system for a work class ROV", OCEANS 2009, MTS, 2009, 1~8
- Kim, D., "Heave compensation dynamics for offshore drilling operation", J. Mar. Sci. Eng, 9(9), pp.965~ (2021)[DOI]
- Kim, G. -N., "Method for analysis of an offshore heave compensator", Appl. Sci, 6(2), pp.51~ (2016)[DOI]
- Lee, H., "Dynamic simulation of the wireline riser tensioner system for a mobile offshore drilling unit based on multibody system dynamics", Ocean Eng, 106, pp.485~495 (2015)[DOI]
- Li, X., "A collaborative simulation in shipbuilding and the offshore installation based on the integration of the dynamic analysis, virtual reality, and control devices", Int. J. Nav. Archit. Ocean Eng, 11(2), pp.699~722 (2019)[DOI]
- Luh, J., "On-line computational scheme for mechanical manipulators", J. Dyn. Syst. Meas. Control, 102, pp.69~76 (1980)
- Park, K. -P., "Development of offshore drilling platform simulation for virtual onboard experience", Int. J. Nav. Archit. Ocean Eng, 14, pp.100431~ (2022)[DOI]
- Rao, S. S., "Mechanical Vibrations, fifth ed" (2010), Prentice Hall
- Southerland, A., "Mechanical systems for ocean engineering", Nav. Eng. J, 82(5), pp.63~74 (1970)[DOI]
- Woodacre, J. K., "A review of vertical motion heave compensation systems", Ocean Eng, 104, pp.140~154 (2015)[DOI]
- Xie, T., "Dynamic analysis of active heave compensation system for marine winch under the impact of irregular waves", J. Mar. Sci. Eng, 10(10), pp.1427~ (2022)[DOI]
- Xu, J., "A semi-analytical method of passive heave compensator for the splash zone crossing : modeling and application", Ocean Eng, 286, pp.115613~ (2023)[DOI]
- Yi, B., "Dynamic analysis and optimization of a novel dual-valve heave compensator for heavy lifting operations", Ocean Eng, 309, pp.118528~ (2024)[DOI]
- Zhan, Y., "Passive heave compensator design and numerical simulation for strand jack during lift operation in deep water", J. Mar. Sci. Eng, 9(7), pp.714~ (2021)[DOI]
- Zhang, F., "Performance analysis of the passive heave compensator for hydraulic shipwreck lifting systems in twinbarge salvaging", Ocean Eng, 280, pp.114469~ (2023)[DOI]