Developing a numerical framework to study the cavitation and non-cavitation behaviour of a centrifugal pump inducer

키워드

참고문헌 (62)

1. Arndt, R.E.A, "Cavitation in fluid machinery and hydraulic structures", Annu. Rev. Fluid Mech, 13(1), pp.273~326 (1981)[DOI]
2. Bakir, F., "Numerical and experimental investigations of the cavitating behavior of an inducer", Int. J. Rotating Mach, 10, pp.690740~ (2004)[DOI]
3. Boussinesq, J., "Essai sur la th´eorie des eaux courantes: Imprimerie Nationale", ~ (1877)
4. Bramanti, C., "A simplified analytical model for evaluating the noncavitating performance of axial inducers", Paper Presented at the 43rd AIAA, SAE, pp.ASEE Joint Propulsion Conference & Exhibit, 2007
5. Brennen, C. E., "Hydrodynamics of Pumps" (2011), Cambridge University Press
6. Brennen, C. E., "Cavitation and Bubble Dynamics" (2014), Cambridge university press
7. Cervone, A., "Setup of a highspeed Optical system for the Characterization of flow instabilities generated by cavitation", J. Fluid Eng, 129(7), pp.877~885 (2007)[DOI]
8. Cervone, A., "Cavitation and flow instabilities in a 4-bladed axial inducer designed by means of a reduced order analytical model", 47th AIAA, SAE, pp.ASEE Joint Propulsion Conference & Exhibit, 2009
9. Cheng, H. -y., "A review of cavitation in tip-leakage flow and its control", J. Hydrodyn, 33(2), pp.226~242 (2021)[DOI]
10. Chivers, T., "The correlation of cavitating performance for a centrifugal pump handling various liquids", Proceedings of The Institution of Mechanical Engineers, 1, pp.48~68 (1969)[DOI]
11. Choi, J. K., "A numerical investigation on head losses and flow qualities for a large cavitation tunnel without impeller", Int. J. Nav. Archit. Ocean Eng, 14, pp.100494~ (2022)[DOI]
12. Coutier-Delgosha, O., "Numerical study of the effect of the leading edge shape on cavitation around inducer blade sections", JSME International Journal Series B Fluids and Thermal Engineering, 45(3), pp.678~685 (2002)[DOI]
13. Coutier-Delgosha, O., "Experimental and numerical studies in a centrifugal pump with two-dimensional curved blades in cavitating condition", J. Fluid Eng, 125(6), pp.970~978 (2004)[DOI]
14. Coutier-Delgosha, O., "Numerical simulation of turbopump inducer cavitating behavior", Int. J. Rotating Mach, 2005, pp.752538~ (2005)[DOI]
15. d’Agostino, L., "A reduced order model for preliminary design and performance prediction of tapered inducers: comparison with numerical simulations", Paper Presented at the 44th AIAA, SAE, pp.ASEE Joint Propulsion Conference & Exhibit, 2008
16. Flores, N. G., "Head Drop of a Spatial Turbopump Inducer", ~ (2008)
17. Fu, Y., "Effect of tip clearance on the internal flow and hydraulic performance of a three-bladed inducer", Int. J. Rotating Mach (2017)
18. Fu, Y., "Experimental and numerical study on hydraulic performances of a turbopump with and without an inducer", Paper Presented at the ASME 2018 5th Joint US-European Fluids Engineering Division Summer Meeting (2018)
19. Grotjans, H., "European Community on computational methods in applied", Paper Presented at the 4th, Vol 1 Pts 1-2; Proceedings of the Fourth European Computational Fluid Dynamics Conference (1998)
20. Guo, X, "Numerical and experimental investigations on the cavitation characteristics of a high-speed centrifugal pump with a splitter-blade inducer", J. Mech. Sci. Technol, 29(1), pp.259~267 (2015)
21. Guo, X., "Anti-cavitation performance of a splitterbladed inducer under different flow rates and different inlet pressures", Sci. China Technol. Sci, 58(12), pp.2131~2138 (2015)[DOI]
22. Guo, X., "Effects of the short blade locations on the anticavitation performance of the splitter-bladed inducer and the pump", Chin. J. Chem. Eng, 23(7), pp.1095~1101 (2015)[DOI]
23. Guo, X., "Effects of the number of inducer blades on the anti-cavitation characteristics and external performance of a centrifugal pump", J. Mech. Sci. Technol, 30, pp.3173~3181 (2016)
24. Hadavandi, R., "Identification of cavitation instabilities on a three-bladed inducer by means of strain Gages", J. Fluid Eng, 142(2) (2019)[DOI]
25. Han, C. -z., "LES method of the tip clearance vortex cavitation in a propelling pump with special emphasis on the cavitation-vortex interaction", J. Hydrodyn, 32(6), pp.1212~1216 (2020)[DOI]
26. He, P., "Prediction of cavitation dynamics and cavitation erosion around a three-dimensional twisted hydrofoil with an LES method", Int. J. Nav. Archit. Ocean Eng, 15, pp.100536~ (2023)[DOI]
27. Hosseini, S. E., "Experimental investigation and multi-objective optimization of savonius wind turbine based on modified non-dominated sorting genetic algorithm-II", Wind Eng, 48, pp.446~467 (2024)[DOI]
28. Hosseini, S. E., "Experimental and numerical investigation of different geometrical parameters in a centrifugal blood pump", Research on Biomedical Engineering, 38(2), pp.423~437 (2022)[DOI]
29. Jafarzadeh, B., "The flow simulation of a low-specific-speed high-speed centrifugal pump", Appl. Math. Model, 35(1), pp.242~249 (2011)[DOI]
30. Liquid Rocket Engine Turbopump Inducers, "Jakobsen, J. K.", Published by NASA, 98~, pp.NASA SP- 8052 (1971)
31. Keshmiri, A., "Refined eddy viscosity schemes and large eddy simulations for ascending mixed convection flows", Proceedings of the Proc. 4th Int. Symp. On Advances in Computational Heat Transfer, “CHT08”, 44, pp.1~22 (2008)
32. Keshmiri, A., "Turbulence Models and large eddy simulations Applied to ascending mixed convection flows", Flow. Turbul. Combust, 89, pp.407~434 (2012)[DOI]
33. Keshmiri, A., "Assessment of a common nonlinear eddy-viscosity turbulence model in capturing laminarization in mixed convection flows", Numer. Heat Transf. Part A Appl, 69 (2016)[DOI]
34. Keshmiri, A., "Benchmarking of Three Different CFD Codes in Simulating Natural, Forced and Mixed Convection Flows", Numer. Heat Transf. Part A Appl, 2015, pp.67~ (2015)[DOI]
35. Keshmiri, A., "Assessment of advanced RANS models against large eddy simulation and experimental data in the investigation of ribbed passages with passive heat transfer", Numer. Heat Tran. Part B Fundam, 69 (2016)[DOI]
36. Fluid Dynamics of Inducers-A Review, "Lakshminarayana, B.", ~ (1982)
37. Lettieri, C., "Characterization of rotating cavitation in a four bladed inducer", Paper Presented at the 52nd AIAA, ASEE Joint Propulsion Conference, pp.2016[DOI]
38. Li, Y. -j., "Numerical investigation of performance of an axial-flow pump with inducer* *Project supported by the National nature Science Foundation of China (grant No. 90510007)", Journal of Hydrodynamics, Ser. B, 19(6), pp.705~711 (2007)
39. Li, X., "Numerical simulation of leading edge cavitation within the whole flow passage of a centrifugal pump", Sci. China Technol. Sci, 56(9), pp.2156~2162 (2013)[DOI]
40. Li, G., "Liquid-vapor two-phase flow in centrifugal pump: cavitation, mass transfer, and impeller structure optimization", Vacuum, 201, pp.111102~ (2022)[DOI]
41. Limbach, P., "Numerical and experimental analysis of cavitating flow in a low specific speed centrifugal pump with different surface roughness", J. Fluid Eng, 139(10) (2017)[DOI]
42. Lopez-Santana, G. B., "Experimental techniques against RANS method in a fully developed turbulent pipe flow : Evolution of experimental and computational methods for the study of turbulence", Fluids, 7(2) (2022)
43. Mejri, I., "Comparison of computational results obtained from a Homogeneous cavitation model with experimental investigations of three inducers", J. Fluid Eng, 128(6), pp.1308~1323 (2006)[DOI]
44. Mousmoulis, G., "Experimental analysis of cavitation in a centrifugal pump using acoustic emission, vibration measurements and flow visualization", Eur. J. Mech. - B, 2019, pp.75, 300~311
45. Okita, K., "Numerical analysis for unsteady cavitating flow in a pump inducer", Paper Presented at the Fifth International Symposium on Cavitation (CAV2003) (2003)
46. Okita, K., "Numerical analysis of the influence of the tip clearance flows on the unsteady cavitating flows in a three-dimensional inducer", Journal of Hydrodynamics, Ser. B, 21(1), pp.34~40 (2009)
47. Pace, G., "Geometry effects on flow instabilities of different three-bladed inducers", J. Fluid Eng, 137(4) (2015)[DOI]
48. Pace, G., "Inducer and centrifugal pump contributions to the rotordynamic fluid forces acting on a space turbopump", J. Fluid Eng, 140(2) (2017)[DOI]
49. Plesset, M. S., "The dynamics of cavitation bubbles", J. Appl. Mech, 16(3), pp.277~282 (2021)[DOI]
50. Rakibuzzaman, M., "Numerical and experimental investigation of cavitation flows in a multistage centrifugal pump", J. Mech. Sci. Technol, 32(3), pp.1071~1078 (2018)[DOI]
51. Rayleigh, L., "VIII. On the pressure developed in a liquid during the collapse of a spherical cavity", London, Edinburgh Dublin Phil. Mag. J. Sci, 34(200), pp.94~98 (1917)[DOI]
52. Shojaeefard, M. H., "CFD simulation and Pareto-based multi- objective shape optimization of the centrifugal pump inducer applying GMDH neural network, modified NSGA-II, and TOPSIS", Struct. Multidiscip. Optim, 60(4), pp.1509~1525 (2019)[DOI]
53. Stripling, L., "Cavitation in Turbopumps-Part 1", ~ (1962)
54. Svennberg, U., "Experimental analysis of tip vortex cavitation mitigation by controlled surface roughness", J. Hydrodyn, 32(6), pp.1059~1070 (2020)[DOI]
55. Torre, L., "Experimental performance of a tapered axial inducer: comparison with analytical predictions", 45th AIAA, SAE, pp.ASEE Joint Propulsion Conference & Exhibit, 2009
56. Wang, L., "Computational theory of cavitating flows for hydraulic turbo-machinery with consideration of influence of water quality", Sci. China Technol. Sci, 53(12), pp.3341~3348 (2010)[DOI]
57. Wang, K., "Multi-condition optimization and experimental verification of impeller for a marine centrifugal pump", Int. J. Nav. Archit. Ocean Eng, 12, pp.71~84 (2020)[DOI]
58. Wang, J., "Numerical simulation of cavitation characteristics of a centrifugal pump based on an improved ZGB model", Process, 11, pp.438~ (2023)[DOI]
59. Xu, Y., "Pressure fluctuation and flow pattern of a mixed-flow pump with different blade tip clearances under cavitation condition", Adv. Mech. Eng, 9(4), pp.1687814017696227~ (2017)[DOI]
60. Zare, J., "Airborne dust-induced performance degradation in NREL phase VI wind turbine : a numerical study", Int. J. Green Energy, 21, pp.1295~1314 (2024)[DOI]
61. Zhang, J. -y., "Experimental and numerical investigations of the collapse of a laser-induced cavitation bubble near a solid wall", J. Hydrodyn, 34(2), pp.189~199 (2022)[DOI]
62. Zhao, X. a., "Numerical simulations and surrogate-based optimization of cavitation performance for an aviation fuel pump", J. Mech. Sci. Technol, 31(2), pp.705~716 (2017)[DOI]

관련 논문AI추천