광중합의 시작, 어떤 광조사기를 어떻게 사용해야할까?
Clinical considerations in the use of dental light curing unit
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Increasing the aesthetic needs of patients and decreasing the use of amalgam had led to increased demand for dental resin composite. Thereby, light curing unit (LCU) has become an essential equipment in dental clinic. To ensure long-term prognosis of photopolymerized materials, LCU should have a uniform and consistent radiant output and an emission spectrum that includes the active wavelength range of photoinitiators. In addition, when the correct use and thorough maintenance and repair of LCU are performed, the higher success rate of restoration using photopolymerization materials will be achieved.
Abstract
Increasing the aesthetic needs of patients and decreasing the use of amalgam had led to increased demand for dental resin composite. Thereby, light curing unit (LCU) has become an essential equipment in dental clinic. To ensure long-term prognosis of photopolymerized materials, LCU should have a uniform and consistent radiant output and an emission spectrum that includes the active wavelength range of photoinitiators. In addition, when the correct use and thorough maintenance and repair of LCU are performed, the higher success rate of restoration using photopolymerization materials will be achieved.
참고문헌 (28)
- Cadenaro M, "The role of polymerization in adhesive dentistry", Dent Mater, 35, pp.e1~e22 (2019)
- Rueggeberg FA, "State-of-the-art : dental photocuring-A review", Dent Mater, 27, pp.39~52 (2011)
- Jandt KD, "A brief history of LED photopolymerization", Dent Mater, 29, pp.605~617 (2013)
- Price RB, "Light-curing units : a review of what we need to know", J Dent Res, 94, pp.1179~1186 (2015)
- Rueggeberg FA, "Light curing in dentistry and cinical implications: a literature review", Braz Oral Res, 31(suppl 1), pp.e61~ (2017)
- Price RBT, "Light curing in dentistry", Dent Clin North Am, 61, pp.751~778 (2017)
- Santini A, "General dental practitioners'knowledge of polymerisation of resin-based composite restorations and light curing unit technology", Br Dent J, 211, pp.E13~ (2011)
- Kopperud SE, "Light curing procedures-performance, knowledge level and safety awareness among dentists", J Dent, 58, pp.67~73 (2017)
- Birdsell DC, "Harmful effects of near-ultraviolet radiation used for polymerization of a sealant and a composite resin", J Am Dent Assoc, 94, pp.311~314 (1977)
- Ikemura K, "A review of the development of radical photopolymerization initiators used for designing light-curing dental adhesives and resin composites", Dent Mater J, 29, pp.481~501 (2010)
- Chen YC, "Quantum yield of conversion of the photoinitiator camphorquinone", Dent Mater, 23, pp.655~664 (2007)
- Oliveira DC, "The effect of combining photoinitiator systems on the color and curing profile of resin-based composites", Dent Mater, 32, pp.1209~1217 (2016)
- Kirkpatrick SJ, "A primer on radiometry", Dent Mater, 21, pp.21~26 (2005)
- Shortall AC, "Guidelines for the selection, use, and maintenance of LED light-curing units-Part 1", Br Dent J, 221, pp.453~460 (2016)
- Shortall AC, "Guidelines for the selection, use, and maintenance of LED light-curing units-Part II", Br Dent J, 221, pp.551~554 (2016)
- Kramer N, "Light curing of resin-based composites in the LED era", Am J Dent, 21, pp.135~142 (2008)
- Busemann I, "Shortest exposure time possible with LED curing lights", Am J Dent, 24, pp.37~44 (2011)
- Feng L, "Insufficient cure under the condition of high irradiance and short irradiation time", Dent Mater, 25, pp.283~289 (2009)
- Lee CH, "Effect of pulse width modulation-controlled LED light on the polymerization of dental composites", Dent Mater, 34, pp.1836~1845 (2018)
- Calheiros FC, "Degree of conversion and mechanical properties of a BisGMA:TEGDMA composite as a function of the applied radiant exposure", J Biomed Mater Res B Appl Biomater, 84, pp.503~509 (2008)
- McAndrew R, "The effect of disposable infection control barriers and physical damage on the power output of light curing units and light curing tips", Br Dent J, 210, pp.E12~ (2011)
- Sword RJ, "Effect of curing light barriers and light types on radiant exposure and composite conversion", J Esthet Restor Dent, 28, pp.29~42 (2016)
- Bruzell EM, "Evaluation of eye protection filters for use with dental curing and bleaching lamps", J Occup Environ Hyg, 4, pp.432~439 (2007)
- Huang TK, "Reducing, by pulse width modulation, the curing temperature of a prototype high-power LED light curing unit", Dent Mater J, 25, pp.309~315 (2006)
- Kim MJ, "Thermographic analysis of the effect of composite type, layering method, and curing light on the temperature rise of photo-cured composites in tooth cavities", Dent Mater, 33, pp.e373~e383 (2017)
- Seol-Ah Jo, "Effect of pulse-width-modulated LED light on the temperature change of composite in tooth cavities", Dental Materials, 35(4), pp.554~563 (2019), Elsevier BV[DOI]