광조사기의 최신지견

키워드

참고문헌 (63)

1. Bowen RL, "Tensile strength and modulus of elasticity of tooth structure and several restorative materials", J Am Dent Assoc, 64, pp.378~387 (1962)
2. Leinfelder KF, "A conservative approach to placing posterior composite resin restorations", J Am Dent Assoc, 127, pp.743~748 (1996)
3. Sunnegardh-Gronberg K, "Selection of dental materials and longevity of replaced restorations in Public Dental Health clinics in northern Sweden", J Dent, 37, pp.673~678 (2009)
4. Kopperud SE, "Longevity of posterior dental restorations and reasons for failure", Eur J Oral Sci, 120, pp.539~548 (2012)
5. Overton JD, "Early failure of Class II resin composite versus Class II amalgam restorations placed by dental students", J Dent Educ, 76, pp.338~340 (2012)
6. Shortall A, "Initial fracture resistance and curing temperature rise of ten contemporary resin-based composites with increasing radiant exposure", J Dent, 41, pp.455~463 (2013)
7. Hammouda IM, "Effect of light-curing method on wear and hardness of composite resin", J Mech Behav Biomed Mater, 3, pp.216~222 (2010)
8. Ferracane JL, "In vitro aging of dental composites in water-effect of degree of conversion, filler volume, and filler", matrix coupling, 1998, pp.42, 465~472
9. Rueggeberg FA, "Comparison of manufacturer-recommended exposure durations with those determined using biaxial flexure strength and scraped composite thickness among a variety of light-curing units", J Esthet Restor Dent, 21, pp.43~61 (2009)
10. Calheiros FC, "Degree of conversion and mechanical properties of a BisGMA : TEGDMA composite as a function of the applied radiant exposure", J Biomed Mater Res B Appl Biomater, 84, pp.503~509 (2008)
11. Ferracane JL, "Wear and marginal breakdown of with various degrees of cure", J Dent Res, 76, pp.1508~1516 (1997)
12. Polydorou O, "Long-term release of monomers from modern dentalcomposite materials", Eur J Oral Sci, 117, pp.68~75 (2009)[DOI]
13. Chen RS, "The effect of curing light intensity on the cytotoxicity of a dentin-bonding agent", Oper Dent, 26, pp.505~510 (2001)
14. Quinlan CA, "In vitro cytotoxicity of a composite resin and compomer", Int Endod J, 35, pp.47~55 (2002)
15. Franz A, "Cytotoxic effects of packable and nonpackable dental composites", Dent Mater, 19, pp.382~392 (2003)
16. Oberholzer TG, "Modern high powered led curing lights and their effect on pulp chamber temperature of bulk and incrementally cured composite resin", Eur J Prosthodont Restor Dent, 20, pp.50~55 (2012)
17. Leprince J, "Pulpal-temperature rise and polymerization efficiency of LED curing lights", Oper Dent, 35, pp.220~230 (2010)
18. Kirkpatrick SJ, "A primer on radiometry", Dent Mater, 21, pp.21~26 (2005)
19. Murray GA, "Ultraviolet light and ultraviolet light-activated omposite resins", J Prosthet Dent, 46, pp.167~170 (1981)
20. Rueggeberg FA, "State-of-the-art : dental photocuring-a review", Dent Mater, 27, pp.39~52 (2011)
21. Althoff O., "Advances in light curing", Am J Dent, 13, pp.77D~81D (2000)
22. Rueggeberg F., "contemporary issues in photocuring", Compend Contin Educ Dent Suppl, (25), pp.S4~S15 (1999)
23. Santini A, "Temperature rise within the pulp chamber during composite resin polymerisation using three different light sources", Open Dent J, 2, pp.137~141 (2008)
24. Kramer N, "Light curing of resin-based composites in the LED era", Am J Dent, 21, pp.135~142 (2008)
25. Wataha JC, "Response of THP-1 monocytes to blue light from dental curing lights", J Oral Rehabil, 35, pp.105~110 (2008)
26. Panna M, "Curing Lights and the science behind them-An Overview", IOSR-JDMS, 13, pp.35~39 (2014)
27. Mills RW, "Dental composite depth of cure with halogen and blue light emitting diode technology", Br Dent J, 186, pp.388~391 (1999)
28. Price RB, "Irradiance differences in the Violet(405 nm)and blue(460 nm)spectral ranges among dental light-curing units", J Esthet Restor Dent, 22, pp.363~377 (2010)
29. D’Alpino PH, "Bond Strength of Resin-based Restorations Polymerized with Different Light-curing Source", J Adhes Dent, 8, pp.293~298 (2006)
30. Abate PF, "Effect of photopolymerization variables on composite hardness", J Prosthet Dent, 86, pp.632~635 (2001)
31. Santini A, "Photoinitiators in dentistry : a review", Prim Dent J, 2, pp.30~33 (2013)
32. Lee DS, "Effect of dual-peak LED unit on the polymerization of coinitiator containing composite resins", Dent Mater J, 31, pp.656~661 (2012)
33. Janda R, "Color stability of resin matrix restorative materials as a function of the method of light activation", Eur J Oral Sci, 112, pp.280~285 (2004)
34. Ikemura K, "Synthesis of a novel camphorquinone derivative having acylphosphine oxide group, characterization by UV-VIS spectroscopy and evaluation of photopolymerization performance", Dent Mater J, 29, pp.122~131 (2010)
35. Schneider LF, "Influence of photoinitiator type on the rate of polymerization, degree of conversion, hardness and yellowing of dental resin composites", Dent Mater, 24, pp.1169~1177 (2008)
36. Arikawa H, "Effect of various visible light photoinitiators on the polymerization and color of light-activated resins", Dent Mater J, 28, pp.454~460 (2009)
37. Anusavice KJ, "Philips’ Science of Dental materials", pp.139~148 (2013), Elsevier Health Sciences
38. Rueggeberg FA, "Effect of light intensity and exposure duration on cure of resin composite", Oper Dent, 19, pp.26~32 (1994)
39. Fan PL, "Curing-light intensity and depth of cure of resin-based composites tested according to international standards", J Am Dent Assoc, 133, pp.429~434 (2002)
40. Wiggins KM, "Curing performance of a new-generation light-emitting diode dental curing unit", J Am Dent Assoc, 135, pp.1471~1479 (2004)
41. Ilie N, "Curing behaviour of high-viscosity bulk-fill composites", J Dent, 42, pp.977~985 (2014)
42. Selig D, "Examining exposure reciprocity in a resin based compos ite using high irradiance levels and real-time degree of conversion values", Dent Mater, 31, pp.583~593 (2015)
43. Emami N, "How light irradiance and curing time affect monomer conversion in light-cured resin composites", Eur J Oral Sci, 111, pp.536~542 (2003)
44. Hadis M, "High irradicance curing and anomalies of exposure reciprocity law in resin-based materials", J Dent, 39, pp.549~557 (2011)
45. Halvorson RH, "Energy dependent polymerization of resin-based composite", Dent Mater, 18, pp.463~469 (2002)
46. Leprince JG, "Photoinitiator type and applicability of exposure reciprocity law in filled and unfilled photoactive resins", Dent Mater, 27, pp.157~164 (2011)
47. Wydra JW, "The reciprocity law concerning light dose relationships applied to Bis-GMA", TEGDMA photopolymers : theoretical analysis and experimental characterization, 2014, pp.30, 605~612
48. Feng L, "A mechanism on why slower polymerization of a dental composite produces lower contraction stress", J Biomed Mater Res B Appl Biomater, 78, pp.63~69 (2006)
49. Price RB, "Light-Curing Units : A Review of What We Need to Know", J Dent Res, 94, pp.1179~1186 (2015)
50. Xu X, "Shear bond strength with increasing light-guide distance from dentin", J Esthet Restor Dent, 18, pp.19~27 (2006)
51. Price RB, "Effect of distance on irradiance and beam homogeneity from 4 light-emitting diode curing units", J Can Dent Assoc, 77, pp.b9~ (2011)
52. Aguiar FH, "Effect of light curing tip distance and resin shade on microhardness of hybrid resin composite", Braz Oral Res, 19, pp.302~306 (2005)
53. Price RB, "Light energy transmission through cured resin composite and human dentin", Quintessence Int, 31, pp.659~667 (2000)
54. AlShaafi MM, "Factors affecting polymerization of resin-based composites : A literature review", Saudi Dent J, 29, pp.48~58 (2017)
55. Sakaguchi RL, "Effect of light power density on development of elastic modulus of a model light-activated composite during polymerization", J Esthet Restor Dent, 13, pp.121~130 (2001)
56. Feilzer AJ, "Influence of light intensity on polymerization shrinkage and integrity of restoration-cavity interface", Eur J Oral Sci, 103, pp.322~326 (1995)
57. Suh BI, "The effect of the pulse-delay cure technique on resiudal strain in composites", Compend Contin Educ Dent, 20, pp.4~12 (1999)
58. CHOI KK, "Adhesion and esthetic restoration", pp.160~189 (2017), Myung Mun publishing Co. Ltd
59. "American Conference of Governmental Industrial Hygienists TLVs and BEIs Based on the Documentation for Threshold Limit Values for Chemical Substances and Physical Agent", ~ (2012)
60. "Guidelines on limits of exposure to broad-band incoherent optical radiation (0.38 to 3 microM). International Commission on Non-Ionizing Radiation Protection", Health Phys, 73, pp.539~554 (1997)
61. Labrie D, "Evaluation of ocular hazards from 4 types of curing lights", J Can Dent Assoc, 77, pp.b116~ (2011)
62. Council on Dental Materials, Instruments, and Equipment, "The effects of blue light on the retina and the use of protective filtering glasses", J Am Dent Assoc, 112, pp.533~535 (1986)
63. Price RB, "Contemporary Issues in Light Curing", Oper Dent, 39, pp.4~14 (2014)

관련 논문AI추천