광경화성 액상수지경화방식 이용한 치과용 3D 프린터 종류와 특성
Introduction to photopolymerization-based dental 3D printers
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
3D printing is an additive manufacturing technique with popularity in dental fields for fabricating a wide range of structures and complex geometries. Photosensitive resin-based materials are the most widely used in dental clinics, from manufacturing orthodontic devices to implant surgical guides. Each device for 3D printing carries advantages and disadvantages as well as specific requirements for understanding the printing process. This article contains an introduction of the vat photopolymerization-based dental 3D printing devices to enhance understanding, thus gaining feasibility of the clinical use.
Abstract
3D printing is an additive manufacturing technique with popularity in dental fields for fabricating a wide range of structures and complex geometries. Photosensitive resin-based materials are the most widely used in dental clinics, from manufacturing orthodontic devices to implant surgical guides. Each device for 3D printing carries advantages and disadvantages as well as specific requirements for understanding the printing process. This article contains an introduction of the vat photopolymerization-based dental 3D printing devices to enhance understanding, thus gaining feasibility of the clinical use.
참고문헌 (18)
- "ISO/ASTM(2017)ISO/ASTM 52900 : 2015 additive manufacturing-general principles-terminology"[URL]
- Ligon SC, "Polymers for 3D printing and customized additive manufacturing", Chemical reviews, 117(15), pp.10212~10290 (2017)
- Al-Dulaijan YA, "Effect of Printing Orientation and Postcuring Time on the Flexural Strength of 3D-Printed Resins", Journal of Prosthodontics (2022)
- Piedra-Cascón W, "3D printing parameters, supporting structures, slicing, and postprocessing procedures of vat-polymerization additive manufacturing technologies : A narrative review", Journal of Dentistry, 109, pp.103630~ (2021)
- Lee EH, "Effect of layer thickness and printing orientation on the color stability and stainability of a 3D-printed resin material", The Journal of Prosthetic Dentistry (2022)
- Puebla K, "Effects of environmental conditions, aging, and build orientations on the mechanical properties of ASTM type I specimens manufactured via stereolithography", Rapid Prototyping Journal, 18(5), pp.374~388 (2012)
- Aati S, "Effect of post-curing light exposure time on the physico–mechanical properties and cytotoxicity of 3D-printed denture base material", Dental Materials, 38(1), pp.57~67 (2022)
- Chang J, "Impact of postpolymerization devices and locations on the color, translucency, and mechanical properties of 3D-printed interim resin materials", The Journal of Prosthetic Dentistry (2022)
- Moon W, "Dimensional accuracy evaluation of temporary dental restorations with different 3D printing systems", Materials, 14(6), pp.1487~ (2021)
- Groth CH, "Three-dimensional printing technology", J Clin Orthod, 48(8), pp.475~485 (2014)
- SAHA, "Scalable submicrometer additive manufacturing", Science, 366(6461), pp.105~109 (2019)
- Methani MM, "The potential of additive manufacturing technologies and their processing parameters for the fabrication of all-ceramic crowns : A review", Journal of Esthetic and Restorative Dentistry, 32(2), pp.182~192 (2020)
- He R, "Fabrication of complex-shaped zirconia ceramic parts via a DLP-stereolithography-based 3D printing method", Ceramics International, 44(3), pp.3412~3416 (2018)
- Patel DK, "Highly stretchable and UV curable elastomers for digital light processing based 3D printing", Advanced Materials, 29(15), pp.1606000~ (2017)
- Tsolakis IA, "Comparison in Terms of Accuracy between DLP and LCD Printing Technology for Dental Model Printing", Dentistry Journal, 10(10), pp.181~ (2022)
- Madžarević M, "Evaluation of exposure time and visible light irradiation in LCD 3D printing of ibuprofen extended release tablets", European Journal of Pharmaceutical Sciences, 158, pp.105688~ (2021)
- Santoliquido, O., "Additive Manufacturing of ceramic components by Digital Light Processing : A comparison between the"bottom-up"and the"top-down"approaches", Journal of the European Ceramic Society, 39(6), pp.2140~2148 (2019)
- Kessler A, "3D printing in dentistry—State of the art", Operative dentistry, 45(1), pp.30~40 (2020)