Evaluation of shear bond strength of repair acrylic resin to Co-Cr alloy
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
PURPOSE. The purpose of this study was to investigate the impact of different surface treatment methods and thermal ageing on the bond strength of autopolymerizing acrylic resin to Co-Cr. MATERIALS AND METHODS. Co-Cr alloy specimens were divided into five groups according to the surface conditioning methods. C: No treatment; SP: flamed with the Silano-Pen device; K: airborne particle abrasion with Al2O3; Co: airborne particle abrasion with silica-coated Al2O3; KSP: flamed with the Silano-Pen device after the group K experimental protocol. Then, autopolymerized acrylic resin was applied to the treated specimen surfaces. All the groups were divided into two subgroups with the thermal cycle and water storage to determine the durability of the bond. The bond strength test was applied in an universal test machine and treated Co-Cr alloys were analyzed by scanning electron microscope (SEM). Two-way analysis of variance (ANOVA) was used to determine the significant differences among surface treatments and thermocycling. Their interactons were followed by a multiple comparison' test performed uing a post hoc Tukey HSD test (α=.05). RESULTS. Surface treatments significantly increased repair strengths of repair resin to Co-Cr alloy. The repair strengths of Group K, and Co significantly decreased after 6,000 cycles (P<.001). CONCLUSION. Thermocycling lead to a significant decrease in shear bond strength for air abrasion with silica-coated aluminum oxide particles. On the contrary, flaming with Silano-Pen did not cause a significant reduction in adhesion after thermocycling.
Abstract
PURPOSE. The purpose of this study was to investigate the impact of different surface treatment methods and thermal ageing on the bond strength of autopolymerizing acrylic resin to Co-Cr. MATERIALS AND METHODS. Co-Cr alloy specimens were divided into five groups according to the surface conditioning methods. C: No treatment; SP: flamed with the Silano-Pen device; K: airborne particle abrasion with Al2O3; Co: airborne particle abrasion with silica-coated Al2O3; KSP: flamed with the Silano-Pen device after the group K experimental protocol. Then, autopolymerized acrylic resin was applied to the treated specimen surfaces. All the groups were divided into two subgroups with the thermal cycle and water storage to determine the durability of the bond. The bond strength test was applied in an universal test machine and treated Co-Cr alloys were analyzed by scanning electron microscope (SEM). Two-way analysis of variance (ANOVA) was used to determine the significant differences among surface treatments and thermocycling. Their interactons were followed by a multiple comparison' test performed uing a post hoc Tukey HSD test (α=.05). RESULTS. Surface treatments significantly increased repair strengths of repair resin to Co-Cr alloy. The repair strengths of Group K, and Co significantly decreased after 6,000 cycles (P<.001). CONCLUSION. Thermocycling lead to a significant decrease in shear bond strength for air abrasion with silica-coated aluminum oxide particles. On the contrary, flaming with Silano-Pen did not cause a significant reduction in adhesion after thermocycling.
참고문헌 (18)
- Ohkubo C., "Shear bond strengths of polymethyl methacrylate to cast titanium and cobalt-chromium frameworks using five metal primers", J Prosthet Dent, 83, pp.50~57 (2000)
- Bulbul M., "The effect of primers on shear bond strength of acrylic resins to different types of metals", J Prosthet Dent, 103, pp.303~308 (2010)
- Kim JY., "Effect of laboratory procedures and thermocycling on the shear bond strength of resin-metal bonding systems", J Prosthet Dent, 90, pp.184~189 (2003)
- Maruo Y., "Does plasma irradiation improve shear bond strength of acrylic resin to cobalt-chromium alloy?", Dent Mater, 20, pp.509~512 (2004)
- Shimizu H., "Use of metal conditioners to improve bond strengths of autopolymerizing denture base resin to cast Ti-6Al-7Nb and Co-Cr", J Dent, 34, pp.117~122 (2006)
- Banerjee S., "In vitro tensile bond strength of denture repair acrylic resins to primed base metal alloys using two different processing techniques", J Prosthodont, 18, pp.676~683 (2009)
- Pesun S., "Bond strength of acrylic resin to co-balt-chromium alloy treated with the Silicoater MD and Kevloc systems", J Can Dent Assoc, 64, pp.798~802 (1998)
- Mudford L., "An investigation of debonding between heat-cured PMMA and titanium alloy(Ti-6A1-4V)", J Dent, 25, pp.415~421 (1997)
- NaBadalung DP., "Comparison of bond strengths of denture base resins to nickel-chromiumberyllium removable partial denture alloy", J Prosthet Dent, 78, pp.566~573 (1997)
- Sharp B., "Effectiveness of metal surface treatments in controlling microleakage of the acrylic resinmetal framework interface", J Prosthet Dent, 84, pp.617~622 (2000)
- Sanohkan S., "Shear bond strength between autopolymerizing acrylic resin and Co-Cr alloy using different primers", Dent Mater J, 31, pp.765~771 (2012)
- Rached RN., "Repair strength of autopolymerizing, microwave, and conventional heat-polymerized acrylic resins", J Prosthet Dent, 92, pp.79~82 (2004)
- Nagai E., "Repair of denture base resin using woven metal and glass fiber : effect of methylene chloride pretreatment", J Prosthet Dent, 85, pp.496~500 (2001)
- Leibrock A., "In vitro study of the effect of thermo-and load-cycling on the bond strength of porcelain repair systems", J Oral Rehabil, 26, pp.130~137 (1999)
- Ishii T., "Effect of alumina air-abrasion on mechanical bonding between an acrylic resin and casting alloys", J Oral Sci, 51, pp.161~166 (2009)
- Janda R., "Spark erosion as a metal-resin bonding system", Dent Mater, 23, pp.193~197 (2007)
- Matinlinna JP., "Silane based concepts on bonding resin composite to metals", J Contemp Dent Pract, 8, pp.1~8 (2007)
- Clelland NL., "Adhesion testing of a denture base resin with 5 casting alloys", J Prosthodont, 9, pp.30~36 (2000)