Prospective randomized clinical trial of hydrophilic tapered implant placement at maxillary posterior area: 6 weeks and 12 weeks loading

키워드

참고문헌 (33)

1. Albrektsson T, "Osseointegrated titanium implants. Requirements for ensuring a long-lasting, direct bone-to-implant anchorage in man", Acta Orthop Scand, 52, pp.155~170 (1981)
2. Babbush CA, "Titanium plasma spray screw implant system for reconstruction of the edentulous mandible", Dent Clin North Am, 30, pp.117~131 (1986)
3. Brånemark PI, "Osseointegrated implants in the treatment of the edentulous jaw. Experience from a 10-year period", Scand J Plast Reconstr Surg Suppl, 16, pp.1~132 (1977)
4. Cochran DL, "The use of reduced healing times on ITI implants with a sandblasted and acid-etched (SLA) surface: early results from clinical trials on ITI SLA implants", Clin Oral Implants Res, 13, pp.144~153 (2002)
5. Abrahamsson I, "Early bone formation adjacent to rough and turned endosseous implant surfaces. An experimental study in the dog", Clin Oral Implants Res, 15, pp.381~392 (2004)
6. Choi JM, "Ion-beam-assisted deposition (IBAD) of hydroxyapatite coating layer on Ti-based metal substrate", Biomaterials, 21, pp.469~473 (2000)
7. Kim H, "Enhanced bone forming ability of SLA-treated Ti coated with a calcium phosphate thin film formed by e-beam evaporation.", Biomed Mater, 5, pp.044106~ (2010)
8. Ganeles J, "Immediate and early loading of Straumann implants with a chemically modified surface (SLActive) in the posterior mandible and maxilla: 1-year results from a pro-spective multicenter study", Clin Oral Implants Res, 19, pp.1119~1128 (2008)
9. Zöllner A, "Immediate and early non-occlusal loading of Straumann implants with a chemically modified surface (SLActive) in the posterior mandible and maxilla: interim results from a prospective multicenter randomized-controlled study", Clin Oral Implants Res, 19, pp.442~450 (2008)
10. Bornstein MM, "Early loading of non-submerged titanium implants with a sandblasted and acid-etched surface. 5-year results of a prospective study in partially edentulous patients", Clin Oral Implants Res, 16, pp.631~638 (2005)
11. Friberg B, "Stability measurements of one-stage Brånemark implants during healing in mandibles. A clinical resonance frequency analysis study", Int J Oral Maxillofac Surg, 28, pp.266~272 (1999)
12. Noguerol B, "Early implant failure. Prognostic capacity of Periotest: retrospective study of a large sample", Clin Oral Implants Res, 17, pp.459~464 (2006)
13. Atieh MA, "Can resonance frequency analysis predict failure risk of immediately loaded implants?", Int J Prosthodont, 25, pp.326~339 (2012)
14. Ribeiro-Rotta RF, "Bone tissue microarchitectural characteristics at dental implant sites part 2: correlation with bone classification and primary stability", Clin Oral Implants Res, 25, pp.e47~e53 (2014)
15. Park KJ, "The relationship between implant stability quotient values and implant insertion variables: a clinical study", J Oral Rehabil, 39, pp.151~159 (2012)
16. Makary C, "Implant primary stability determined by resonance frequency analysis:correlation with insertion torque, histologic bone volume, and torsional stability at 6 weeks", Implant Dent, 21, pp.474~480 (2012)
17. Lekholm U, "Tissue Integrated Prostheses: Osseointegration in Clinical Dentistry", pp.199~209 (1985), Quintessence Publ Co
18. Zarb GA, "Consensus report: towards optimized treatment outcomes for dental implants", J Prosthet Dent, 80, pp.641~ (1998)
19. Sennerby L, "Osteointegrazione e Carico Immediato. Fondamenti Biologici e Applicazioni Cliniche", pp.19~31 (2002), Masson
20. Kessler-Liechti G, "Stability measurements of 1-stage implants in the edentulous mandible by means of resonance frequency analysis", Int J Oral Maxillofac Implants, 23, pp.353~358 (2008)
21. Ostman PO, "Resonance frequency analysis measurements of implants at placement surgery", Int J Prosthodont, 19, pp.77~83 (2006)
22. Bilhan H, "Influence of surgical technique, implant shape and diameter on the primary stability in cancellous bone", J Oral Rehabil, 37, pp.900~907 (2010)
23. 박주희, "The effect of various thread designs on the initial stability of taper implants", The Journal of Advanced of Prosthodontics, 1(1), pp.19~25 (2009), 대한치과보철학회
24. Ahn SJ, "Differences in implant stability associated with various methods of preparation of the implant bed: an in vitro study", J Prosthet Dent, 107, pp.366~372 (2012)
25. Dorjpalam Bayarchimeg, "Evaluation of the correlation between insertion torque and primary stability of dental implants using a block bone test", Journal of Periodontal & Implant Science, 43(1), pp.30~36 (2013), 대한치주과학회
26. Degidi M, "Determination of primary stability: a comparison of the surgeon’s perception and objective measurements", Int J Oral Maxillofac Implants, 25, pp.558~561 (2010)
27. Pommer B, "Primary implant stability in the atrophic sinus floor of human cadaver maxillae: impact of residual ridge height, bone density, and implant diameter", Clin Oral Implants Res, 25, pp.e109~e113 (2014)
28. Ribeiro-Rotta RF, "Bone tissue microarchitectural characteristics at dental implant sites part 2: correlation with bone classification and primary stability", Clin Oral Implants Res, 25, pp.e47~e53 (2014)
29. Marquezan M, "Does bone mineral density influence the primary stability of dental implants? A systematic review", Clin Oral Implants Res, 23, pp.767~774 (2012)
30. Isoda K, "Relationship between the bone density estimated by cone-beam computed tomography and the primary stability of dental implants", Clin Oral Implants Res, 23, pp.832~836 (2012)
31. Farré-Pagés N, "Relation between bone density and primary implant stability", Med Oral Patol Oral Cir Bucal, 16, pp.e62~e67 (2011)
32. Hong J, "Quantitative biomechanical analysis of the influence of the cortical bone and implant length on primary stability", Clin Oral Implants Res, 23, pp.1193~1197 (2012)
33. Hsu JT, "The effects of cortical bone thickness and trabecular bone strength on noninvasive measures of the implant primary stability using synthetic bone models", Clin Implant Dent Relat Res, 15, pp.251~261 (2013)

관련 논문AI추천