A simple and effective method for addition silicone impression disinfection

키워드

참고문헌 (41)

1. Rentzia A, "Disinfection procedures : their efficacy and effect on dimensional accuracy and surface quality of an irreversible hydrocolloid impression material", J Dent, 39, pp.133~140 (2011)
2. Choi YR, "The disinfection of impression materials by using microwave irradiation and hydrogen peroxide", J Prosthet Dent, 112, pp.981~987 (2014)
3. Amin WM, "The effects of disinfectants on dimensional accuracy and surface quality of impression materials and gypsum casts", J Clin Med Res, 1, pp.81~89 (2009)
4. Flanagan DA, "Antimicrobial activities of dental impression materials", Dent Mater, 14, pp.399~404 (1998)
5. Badrian H, "The effect of three different disinfection materials on alginate impression by spray method", ISRN Dent, 2012, pp.695151~ (2012)
6. Chidambaranathan AS, "Comprehensive review and comparison of the disinfection techniques currently available in the literature", J Prosthodont, 28, pp.e849~e856 (2019)
7. Ganavadiya R, "Disinfecting efficacy of three chemical disinfectants on contaminated diagnostic instruments : A randomized trial", J Basic Clin Pharm, 5, pp.98~104 (2014)
8. Aeran H, "Use of clinical UV chamber to disinfect dental impressions: A comparative study", J Clin Diagn Res, 9, pp.ZC67~ZC70 (2015)
9. Correia-Sousa J, "The effect of water and sodium hypochlorite disinfection on alginate impressions", Rev Port Estomatol Med Dent Cir Maxilofac, 54, pp.8~12 (2013)
10. "Australian Dental Association (ADA)’s Guidelines for Infection Control, Third Edition", Australian Dental Association, ~ (2015)
11. "Guidelines for Infection Control in Dental Health-Care Settings", MMWR, 52(RR-17) (2003), Centers for Disease Control and Prevention
12. Almortadi N, "Disinfection of dental impressions-compliance to accepted standards", Br Dent J, 209, pp.607~611 (2010)
13. Tullner JB, "Linear dimensional changes in dental impressions after immersion in disinfectant solutions", J Prosthet Dent, 60, pp.725~728 (1988)
14. Marinheiro Marques MC, "Behaviors of dentists and dental technicians in Viseu regarding dental impressions disinfection", Rev Port Estomatol Med Dent Cir J Adv Prosthodont, 11, pp.155~161 (2019)
15. McDonnell G, "Antiseptics and disinfectants : activity, action, and resistance", Clin Microbiol Rev, 12, pp.147~179 (1999)
16. Giammanco GM, "Resistance to disinfection of a polymicrobial association contaminating the surface of elastomeric dental impressions", New Microbiol, 32, pp.167~172 (2009)
17. Melilli D, "The effect of immersion disinfection procedures on dimensional stability of two elastomeric impression materials", J Oral Sci, 50, pp.441~446 (2008)
18. Pal PK, "Evaluation of different disinfactants on dimensional accuracy and surface quality of type IV gypsum casts retrieved from elastomeric impression materials", J Int Oral Health, 6, pp.77~81 (2014)
19. Suarez F, "Implant surface detoxification : a comprehensive review", Implant Dent, 22, pp.465~473 (2013)
20. Presterl E, "Effects of alcohols, povidone-iodine and hydrogen peroxide on biofilms of Staphylococcus epidermidis", J Antimicrob Chemother, 60, pp.417~420 (2007)
21. Faria AC, "Accuracy of stone casts obtained by different impression materials", Braz Oral Res, 22, pp.293~298 (2008)
22. Pande NA, "An evaluation of dimensional accuracy of one-step and two-step impression technique using addition silicone impression material : an in vitro study", J Indian Prosthodont Soc, 13, pp.254~259 (2013)
23. Goel K, "A comparative study between microwave irradiation and sodium hypochlorite chemical disinfection: a prosthodontic view", J Clin Diagn Res, 8, pp.ZC42~ZC46 (2014)
24. Ismail HA, "Evaluation of dimensional accuracy for different complete edentulous impressions immersed in different disinfectant solutions", Eur J Dent, 11, pp.242~249 (2017)
25. "ISO 4823. Dentistry - Elastomeric impression materials" (2015)[URL]
26. "American National Standards Institute", American Dental Association. Specification No. 19: Dental elastometric impression materials, 2004
27. Demajo JK, "Effectiveness of disinfectants on antimicrobial and physical properties of dental impression materials", Int J Prosthodont, 29, pp.63~67 (2016)
28. Samra RK, "Comparative evaluation of dimensional stability of impression materials from developing countries and developed countries after disinfection with different immersion disinfectant systems and ultraviolet chamber", Saudi Dent J, 30, pp.125~141 (2018)
29. Gounder R, "Comparison of disinfectants by immersion and spray atomization techniques on the linear dimensional stability of different interocclusal recording materials : An in vitro study", Eur J Dent, 10, pp.7~15 (2016)
30. Kronström MH, "Accuracy of a new ring-opening metathesis elastomeric dental impression material with spray and immersion disinfection", J Prosthet Dent, 103, pp.23~30 (2010)
31. Taylor RL, "Disinfection procedures : their effect on the dimensional accuracy and surface quality of irreversible hydrocolloid impression materials and gypsum casts", Dent Mater, 18, pp.103~110 (2002)
32. Rowe AH, "Dental impressions. The probability of contamination and a method of disinfection", Br Dent J, 145, pp.184~186 (1978)
33. Dasgupta D, "Effectiveness of mouthrinses and oral prophylaxis on reduction of microorganisms count in irreversible hydrocolloid impression : an in vivo study", J Indian Prosthodont Soc, 13, pp.578~586 (2012)
34. Bustos J, "Effect of inmersion desinfection with 0.5% sodium hypochlorite and 2% glutaraldehyde on alginate and silicone:Microbiology and SEM study", Int J Odontostomat, 4, pp.169~177 (2010)
35. Jeyapalan V, "Comparative evaluation of the antimicrobial efficacy of three immersion chemical disinfectants on clinically derived poly(vinyl siloxane)impressions", J Prosthodont, 27, pp.469~475 (2018)
36. Queiroz DA, "Influence of disinfection with peracetic acid and hypochlorite in dimensional alterations of casts obtained from addition silicone and polyether impressions", J Contemp Dent Pract, 14, pp.1100~1105 (2013)
37. Thouati A, "Dimensional stability of seven elastomeric impression materials immersed in disinfectants", J Prosthet Dent, 76, pp.8~14 (1996)
38. Celebi H, "Disinfection of polyvinyl siloxane impression material by gaseous ozone", J Prosthet Dent, 120, pp.138~143 (2018)
39. Aeran H, "Use of clinical UV chamber to disinfect dental impressions: A comparative study", J Clin Diagn Res, 9, pp.ZC67~ZC70 (2015)
40. Surendra GP, "Evaluation of dimensional stability of autoclavable elastomeric impression material", J Indian Prosthodont Soc, 11, pp.63~66 (2011)
41. Thota KK, "A comparative evaluation of the dimensional stability of three different elastomeric impression materials after autoclaving - an in vitro study", J Clin Diagn Res, 8, pp.ZC48~ZC50 (2014)

관련 논문AI추천