Influence of nonthermal argon plasma on the shear bond strength between zirconia and different adhesives and luting composites after artificial aging

키워드

참고문헌 (32)

1. Rosentritt M, "Influence of resilient support of abutment teeth on fracture resistance of all-ceramic fixed partial dentures: an in vitro study", Int J Prosthodont, 24, pp.465~468 (2011)
2. Aladag A, "Effect of different cleaning regimens on the adhesion of resin to saliva-contaminated ceramics", J Prosthodont, 24, pp.136~145 (2015)[DOI]
3. Kohorst P, "Loadbearing capacity of all-ceramic posterior four-unit fixed partial dentures with different zirconia frameworks", Eur J Oral Sci, 115, pp.161~166 (2007)[DOI]
4. Zhang Y, "Edge chipping and flexural resistance of monolithic ceramics", Dent Mater, 29, pp.1201~1208 (2013)[DOI]
5. Chen L, "Evaluation of silica-coating techniques for zirconia bonding", Am J Dent, 24, pp.79~84 (2011)
6. Tolga Külünk, "The effect of alumina and aluminium nitride coating by reactive magnetron sputtering on the resin bond strength to zirconia core", The Journal of Advanced of Prosthodontics, 5(4), pp.382~387 (2013), 대한치과보철학회[DOI]
7. Pott PC, "Influence of 10-MDP adhesive system on shear bond strength of zirconia-composite interfaces", J Dent Mater Tech, 4, pp.117~126 (2015)
8. Pott PC, "Influence of artificial aging on the shear bond strength of zirconiacomposite interfaces after pretreatment with new 10-MDP adhesive systems", J Dent Mater Tech, 5, pp.1~9 (2016)
9. Koizumi H, "Bonding of resin-based luting cements to zirconia with and without the use of ceramic priming agents", J Adhes Dent, 14, pp.385~392 (2012)
10. Saker S, "Effect of different surface treatments on adhesion of In-Ceram Zirconia to enamel and dentin substrates", J Adhes Dent, 15, pp.369~376 (2013)
11. Canullo L, "Zirconia-composite bonding after plasma of argon treatment", Int J Prosthodont, 27, pp.267~269 (2014)[DOI]
12. Noro A, "Influence of hydrophilic pre-treatment on resin bonding to zirconia ceramics", Bull Tokyo Dent Coll, 56, pp.33~39 (2015)[DOI]
13. Wu CC, "Enhanced hydrophilicity and biocompatibility of dental zirconia ceramics by oxygen plasma treatment", Materials (Basel), 8, pp.684~699 (2015)[DOI]
14. Tabari K, "The impact of plasma treatment of Cercon zirconia ceramics on adhesion to resin composite cements and surface properties", J Laser Med Sci, 8, pp.56~61 (2017)[DOI]
15. dos Santos DM, "Aging effect of atmospheric air on zirconia surfaces treated by nonthermal plasma", J Adhes Dent, 17, pp.413~419 (2015)
16. Casucci A, "Morphological analysis of three zirconium oxide ceramics: Effect of surface treatments", Dent Mater, 26, pp.751~760 (2010)[DOI]
17. Denry IL, "Microstructural and crystallographic surface changes after grinding zirconia-based dental ceramics", J Biomed Mater Res B Appl Biomater, 76, pp.440~448 (2006)
18. Kawai Y, "Phase transformation of zirconia ceramics by hydrothermal degradation", Dent Mater J, 30, pp.286~292 (2011)[DOI]
19. Nakamura T, "The effect of adding silica to zirconia to counteract zirconia's tendency to degrade at low temperatures", Dent Mater J, 30, pp.330~335 (2011)[DOI]
20. de Gee AF, "True linear polymerization shrinkage of unfilled resins and composites determined with a linometer", Dent Mater, 9, pp.11~14 (1993)[DOI]
21. Gostemeyer G, "Influence of cooling rate on zirconia", veneer interfacial adhesion, 2010, pp.6, 4532~4538
22. Ernst CP, "Influence of different luting concepts on long term retentive strength of zirconia crowns", Am J Dent, 22, pp.122~128 (2009)
23. Lindgren J, "Effect of surface treatments and aging in water on bond strength to zirconia", Oper Dent, 33, pp.675~681 (2008)[DOI]
24. Ozcan M, "Effect of various surface conditioning methods on the adhesion of dual-cure resin cement with MDP functional monomer to zirconia after thermal aging", Dent Mater J, 27, pp.99~104 (2008)[DOI]
25. Valverde GB, "Surface characterisation and bonding of Y-TZP following non-thermal plasma treatment", J Dent, 41, pp.51~59 (2013)[DOI]
26. 박찬, "The effect of plasma on shear bond strength between resin cement and colored zirconia", The Journal of Advanced of Prosthodontics, 9(2), pp.118~123 (2017), 대한치과보철학회[DOI]
27. Liu T, "Nonthermal plasma enhanced bonding of resin cement to zirconia ceramic", Clin Plasma Med, 4, pp.50~55 (2016)[DOI]
28. Henningsen A, "Changes in surface characteristics of titanium and zirconia after surface treatment with ultraviolet light or non-thermal plasma", Eur J Oral Sci, 126, pp.126~134 (2018)[DOI]
29. Kitayama S, "Effect of primer treatment on bonding of resin cements to zirconia ceramic", Dent Mater, 26, pp.426~432 (2010)[DOI]
30. Foxton RM, "Durability of resin cement bond to aluminium oxide and zirconia ceramics after air abrasion and laser treatment", J Prosthodont, 20, pp.84~92 (2011)[DOI]
31. Ito Y, "Influence of atmospheric pressure low-temperature plasma treatment on the shear bond strength between zirconia and resin cement", J Prosthodont Res, 60, pp.289~293 (2016)[DOI]
32. Hallmann L, "Effect of surface modifications on the bond strength of zirconia ceramic with resin cement resin", Dent Mater, 32, pp.631~639 (2016)[DOI]

관련 논문AI추천