The effect of alumina and aluminium nitride coating by reactive magnetron sputtering on the resin bond strength to zirconia core

키워드

참고문헌 (41)

1. Kern M, "Resin bonding to oxide ceramics for dental restorations", J Adhes Sci Techno, 23, pp.1097~1111 (2009)
2. Ozcan M, "Comparison of resin cement adhesion to Y-TZP ceramic following manufacturers’' instructions of the cements only", Clin Oral Investig, 12, pp.279~282 (2008)
3. Kitayama S, "Effect of an internal coating technique on tensile bond strengths of resin cements to zirconia ceramics", Dent Mater J, 28 (2009)
4. Casucci A, "Morphological analysis of three zirconium oxide ceramics: Effect of surface treatments", Dent Mater, 26, pp.751~760 (2010)
5. Ozcan M, "Effect of various surface conditioning methods on the adhesion of dual-cure resin cement with MDP functional monomer to zirconia after thermal aging", Dent Mater J, 27, pp.99~104 (2008)
6. Piascik JR, "Surface modification for enhanced silanation of zirconia ceramics", Dent Mater, 25, pp.1116~1121 (2009)
7. Blatz MB, "Resin-ceramic bonding: a re-view of the literature", J Prosthet Dent, 89, pp.268~274 (2003)
8. Atsu SS, "Effect of zirconium-oxide ceramic surface treatments on the bond strength to adhesive resin", J Prosthet Dent, 95, pp.430~436 (2006)
9. Matinlinna JP, "Pilot evaluation of resin composite cement adhesion to zirconia using a novel silane system", Acta Odontol Scand, 65, pp.44~51 (2007)
10. Tsukakoshi M, "Effects of dental adhesive cement and surface treatment on bond strength and leakage of zirconium oxide ceramics", Dent Mater J, 27, pp.159~171 (2008)
11. Tsuo Y, "Effects of alumina-blasting and adhesive primers on bonding between resin luting agent and zirconia ceramics", Dent Mater J, 25, pp.669~674 (2006)
12. Nagayassu MP, "Effect of surface treatment on the shear bond strength of a resinbased cement to porcelain", Braz Dent J, 17, pp.290~295 (2006)
13. Kern M, "Bonding to glass infiltrated alumina ceramic: adhesive methods and their durability", J Prosthet Dent, 73, pp.240~249 (1995)
14. Derand T, "Bond strength of composite luting cement to zirconia ceramic surfaces", Dent Mater, 21, pp.1158~1162 (2005)
15. Aboushelib MN, "Bonding to zirconia using a new surface treatment", J Prosthodont, 19, pp.340~346 (2010)
16. Nothdurft FP, "Effect of surface treatment on the initial bond strength of different luting cementsto zirconium oxide ceramic", Clin Oral Investig, 13, pp.229~235 (2009)
17. Ozcan M, "Effect of surface conditioning methods on the bond strength of luting cement to ceramics", Dent Mater, 19, pp.725~731 (2003)
18. Ozcan M, "Effect of surface conditioning methods on the bond strength of luting cement to ceramics", Dent Mater, 19, pp.725~731 (2003)
19. de Oyagüe RC, "Influence of surface treatments and resin cement selection on bonding to densely-sintered zirconium-oxide ceramic", Dent Mater, 25, pp.172~179 (2009)
20. Amaral R, "Microtensile bond strength of a resin cement to glass infiltrated zirconiareinforced ceramic: the effect of surface conditioning", Dent Mater, 22, pp.283~290 (2006)
21. Wolfart M, "Durability of the resin bond strength to zirconia ceramic after using different surface conditioning methods", Dent Mater, 23, pp.45~50 (2007)
22. Blatz MB, "Influence of surface treatment and simulated aging on bond strengths of luting agents to zirconia", Quintessence Int, 38, pp.745~753 (2007)
23. Zhang S, "Influence of contamination on resin bond strength to nanostructured alumina-coated zirconia ceramic", Eur J Oral Sci, 118, pp.396~403 (2010)
24. Guazzato M, "Influence of surface and heat treatments on the flexural strength of Y-TZP dental ceramic", J Dent, 33, pp.9~18 (2005)
25. Oblak C, "Fracture resistance and reliability of new zirconia posts", J Prosthet Dent, 91, pp.342~348 (2004)
26. Guazzato M, "Strength, reliability and mode of fracture of bilayered porcelain", zirconia (Y-TZP) dental ceramics, 2004, pp.25, 5045~5052
27. Zhang Y, "Damage accumulation and fatigue life of particle-abraded ceramics", Int J Prosthodont, 19, pp.442~448 (2006)
28. Amaral R, "Effect of conditioning methods on the microtensile bond strength of phosphate monomer-based cement on zirconia ceramic in dry and aged conditions", J Biomed Mater Res B Appl Biomater, 85, pp.1~9 (2008)
29. Ruddell DE, "Mechanical properties of a dental ceramic coated by RF magnetron sputtering", J Biomed Mater Res, 51, pp.316~320 (2000)
30. Tanaka K, "Shear bond strength of veneering composite resin to titanium nitride coating alloy deposited by radiofrequency sputtering", J Dent, 34, pp.277~282 (2006)
31. Liu GT, "Mechanical characteristics and corrosion behavior of (Ti,Al)N coatings on dental alloys", Surf Coat Technol, 200, pp.2100~2105 (2005)
32. Tek Z, "A study of the mechanical properties of TiN coating of Cr–Ni alloy", Surf Coat Technol, 196, pp.317~320 (2005)
33. Teixeira EC, "Dynamic fatigue behavior of dental porcelain modified by surface deposition of a YSZ thin film", J Prosthodont, 17, pp.527~531 (2008)
34. Jevnikar P, "The effect of nano-structured alumina coating on resin-bond strength to zirconia ceramics", Dent Mater, 26, pp.688~696 (2010)
35. Ferraris M, "Coatings on zirconia for medical applications", Biomaterials, 21, pp.765~773 (2000)
36. McCrory PV, "Tin oxide coating of aluminous porcelain by reactive ion plating", J Dent, 19, pp.171~175 (1991)
37. McCrory PV, "Evaluation of a potential dental application of vapour deposition techniques for coating alumina with tin oxide", J Mater Sci, 5, pp.543~550 (1994)
38. Teixeira EC, "Effect of YSZ thin film coating thickness on the strength of a ceramic substrate", J Biomed Mater Res B Appl Biomater, 83, pp.459~463 (2007)
39. Beuer F, "Marginal and internal fits of fixed dental prostheses zirconia retainers", Dent Mater, 25, pp.94~102 (2009)
40. Kassner H, "Application of suspension plasma spraying (SPS) for manufacture of ceramic coatings", J Therm Spray Technol, 17, pp.115~123 (2008)
41. Reichelt K, "The preparation of thin films by physical vapour deposition methods", Thin Solid Films, 191, pp.91~126 (1990)

관련 논문AI추천