Repair bond strength of composite resin to zirconia restorations after different thermal cycles

키워드

참고문헌 (56)

1. Guazzato M, "Strength, fracture toughness and microstructure of a selection of allceramic materials. Part I. Pressable and alumina glass-infiltrated ceramics", Dent Mater, 20, pp.441~448 (2004)
2. Tsalouchou E, "Fatigue and fracture properties of yttria partially stabilized zirconia crown systems", Dent Mater, 24, pp.308~318 (2008)
3. Anusavice K, "Phillips’ science of dental materials. Elsevier Health Sciences" (2013), Saunders Elsevier Inc.
4. Al-Dohan HM, "Shear strength of core-veneer interface in bi-layered ceramics", J Prosthet Dent, 91, pp.349~355 (2004)
5. Kelly JR, "Failure of all-ceramic fixed partial dentures in vitro and in vivo : analysis and modeling", J Dent Res, 74, pp.1253~1258 (1995)
6. Chung KH, "Bonding strengths of porcelain repair systems with various surface treatments", J Prosthet Dent, 78, pp.267~274 (1997)
7. Appeldoorn RE, "Bond strength of composite resin to porcelain with newer generation porcelain repair systems", J Prosthet Dent, 70, pp.6~11 (1993)
8. Haselton DR, "Shear bond strengths of 2 intraoral porcelain repair systems to porcelain or metal substrates", J Prosthet Dent, 86, pp.526~531 (2001)
9. Ozcan M, "The use of chairside silica coating for different dental applications : a clinical report", J Prosthet Dent, 87, pp.469~472 (2002)
10. Gregory WA, "Effects of heterogeneous layers of composite and time on composite repair of porcelain", Oper Dent, 15, pp.18~22 (1990)
11. Shahverdi S, "Effects of different surface treatment methods on the bond strength of composite resin to veneer ceramic", J Oral Rehabil, 25, pp.699~705 (1998)
12. Thurmond JW, "Effect of porcelain surface treatments on bond strengths of composite resin bonded to porcelain", J Prosthet Dent, 72, pp.355~359 (1994)
13. Kern M, "Surface conditioning influences zirconia ceramic bonding", J Dent Res, 88, pp.817~822 (2009)
14. Özcan M, "Effect of surface conditioning methods on the bond strength of luting cement to ceramics", Dent Mater, 19, pp.725~731 (2003)
15. Özcan M, "Bond strength durability of a resin composite on a reinforced ceramic using various repair systems", Dent Mater, 25, pp.1477~1483 (2009)
16. Kirmali O, "Veneer ceramic to Y-TZP bonding : comparison of different surface treatments", J Prosthodont, 25, pp.324~329 (2016)
17. Blum IR, "An in vitro comparison of four intra-oral ceramic repair systems", J Dent, 40, pp.906~912 (2012)
18. D’Amario M, "Effect of thermocycling on the bond strength between dual-cured resin cements and zirconium-oxide ceramics", J Oral Sci, 52, pp.425~430 (2010)
19. Lüthy H, "Effect of thermocycling on bond strength of luting cements to zirconia ceramic", Dent Mater, 22, pp.195~200 (2006)
20. Donovan TE, "Metal-free dentistry", J Esthet Restor Dent, 17, pp.141~143 (2005)
21. Fradeani M, "Fiveyear follow-up with Procera all-ceramic crowns", Quintessence Int, 36, pp.105~113 (2005)
22. Guess PC, "Shear bond strengths between different zirconia cores and veneering ceramics and their susceptibility to thermocycling", Dent Mater, 24, pp.1556~1567 (2008)
23. Freilich MA, "Development and clinical applications of a light-polymerized fiber-reinforced composite", J Prosthet Dent, 80, pp.311~318 (1998)
24. Llobell A, "Fatigue life of veneer ceramic repair systems", Int J Prosthodont, 5, pp.205~213 (1992)
25. Ozcan M, "Evaluation of alternative intra-oral repair techniques for fractured ceramic-fused-to-metal restorations", J Oral Rehabil, 30, pp.194~203 (2003)
26. Kamposiora P, "Stress concentration in all-ceramic posterior fixed partial dentures", Quintessence Int, 27, pp.701~706 (1996)
27. Hooshmand T, "Bond durability of the resin-bonded and silane treated ceramic surface", Dent Mater, 18, pp.179~188 (2002)
28. Pameijer CH, "Repairing fractured porcelain : how surface preparation affects shear force resistance", J Am Dent Assoc, 127, pp.203~209 (1996)
29. Cavalcanti AN, "Evaluation of the surface roughness and morphologic features of Y-TZP ceramics after different surface treatments", Photomed Laser Surg, 27, pp.473~479 (2009)
30. Ozcan M, "Clinical study on the reasons for and location of failures of metal-ceramic restorations and survival of repairs", Int J Prosthodont, 15, pp.299~302 (2002)
31. Shiu P, "Effect of feldspathic ceramic surface treatments on bond strength to resin cement", Photomed Laser Surg, 25, pp.291~296 (2007)
32. Akyil MS, "Shear bond strength of repair composite resin to an acid-etched and a laser-irradiated feldspathic ceramic surface", Photomed Laser Surg, 28, pp.539~545 (2010)
33. Attia A, "Fracture strength of all-ceramic crowns luted using two bonding methods", J Prosthet Dent, 91, pp.247~252 (2004)
34. Leibrock A, "In vitro study of the effect of thermo-and load-cycling on the bond strength of porcelain repair systems", J Oral Rehabil, 26, pp.130~137 (1999)
35. Kirmali O, "Efficacy of ceramic repair material on the bond strength of composite resin to zirconia ceramic", Acta Odontol Scand, 73, pp.28~32 (2015)
36. Şen D, "Yüzey Hazırlığının Porselen Tamir Materyallerinin Bağlantı Kuvveti Üzerine Etkisi", J Istanb Univ Fac Dent, 31, pp.69~75 (1997)
37. Matinlinna JP, "Bonding of resin composites to etchable ceramic surfaces-an insight review of the chemical aspects on surface conditioning", J Oral Rehabil, 34, pp.622~630 (2007)
38. Corazza PH, "Effect of post-silanization heat treatments of silanized feldspathic ceramic on adhesion to resin cement", J Adhes Dent, 15, pp.473~479 (2013)
39. Thompson JY, "Adhesion", cementation to zirconia and other non-silicate ceramics: where are we now?, 2011, pp.27, 71~82
40. Tzanakakis EG, "Is there a potential for durable adhesion to zirconia restorations? A systematic review", J Prosthet Dent, 115, pp.9~19 (2016)
41. Seabra B, "Influence of multimode universal adhesives and zirconia primer application techniques on zirconia repair", J Prosthet Dent, 112, pp.182~187 (2014)
42. Wolfart M, "Durability of the resin bond strength to zirconia ceramic after using different surface conditioning methods", Dent Mater, 23, pp.45~50 (2007)
43. Demetoglu GA, "Effect of surface treatments on leakage of zirconium oxide ceramics", Meandros Med Dent J, 17, pp.64~ (2016)
44. Bailey LF, "DICOR surface treatments for enhanced bonding", J Dent Res, 67, pp.925~931 (1988)
45. Chang JC, "Bond strength of composite to alloy treated with bonding systems", J Prosthodont, 2, pp.110~114 (1993)
46. Passia N, "Bond strength of a new generation of universal bonding systems to zirconia ceramic", J Mech Behav Biomed Mater, 62, pp.268~274 (2016)
47. Kamada K, "Effect of ceramic surface treatments on the bond of four resin luting agents to a ceramic material", J Prosthet Dent, 79, pp.508~513 (1998)
48. Matsumura H, "Shear bond strength to feldspathic porcelain of two luting cements in combination with three surface treatments", J Prosthet Dent, 78, pp.511~517 (1997)
49. Blatz MB, "In vitro evaluation of long-term bonding of Procera AllCeram alumina restorations with a modified resin luting agent", J Prosthet Dent, 89, pp.381~387 (2003)
50. Kirmali O, "Shear bond strength of veneering ceramic to zirconia core after different surface treatments", Photomed Laser Surg, 31, pp.261~268 (2013)
51. Serdar Polat, "Evaluation of the bond strength between aged composite cores and luting agent", The Journal of Advanced of Prosthodontics, 7(2), pp.108~114 (2015), 대한치과보철학회[DOI]
52. Uludamar A, "Surface preparations of zirconia based full ceramic restorations before cementation", Cumhuriyet Dent J, 14, pp.140~153 (2011)
53. Akyil MS, "Bond strength of resin cement to yttrium-stabilized tetragonal zirconia ceramic treated with air abrasion, silica coating, and laser irradiation", Photomed Laser Surg, 28, pp.801~808 (2010)
54. Külünk T, "Tam seramik sistemlerde farklı ağız içi tamir setlerinin kullanımımın tamir dayanımıma etkisi", J Ondokuz Mayıs Univ Fac Dent, 10, pp.87~95 (2010)
55. Özdemir E, "Farklı yüzey hazırlıklarının porselen kompozit rezin bağlantısı üzerine etkisinin in-vitro araştırılması", J Gazi Univ Fac Dent, 24, pp.75~82 (2007)
56. Chadwick RG, "Attempted evaluation of three porcelain repair systems-what are we really testing?", J Oral Rehabil, 25, pp.610~615 (1998)

관련 논문AI추천