국내 습식 잠수복 생산 업체의 생산실태 조사 및 향후 연구과제
Study on the wetsuit manufacturing status in Korea and future research task
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The present study examines the overall manufacturing status of local wetsuit makers, problems in the manufacturing process, and future research tasks. The study revealed that most manufacturers use neoprene fabric of varying thickness, depending on the body part. Normally, 3 mm–thick fabric is utilized for high-activity body parts and 5 mm–thick fabric is used for high-activity areas requiring thermal insulation. In terms of the manufacturing method, the tools and manufacturing processes used by companies were found to be similar. However, because of the nature of wetsuits requiring a more complicated manufacturing method than that of general clothing, there were some differences in the manufacturing method processes from company to company, such as bonding and ease treatments. According to wetsuit manufacturers, they make incisions in consideration of the body’s curvature and the overall shape and design of the wetsuit when developing patterns. For example, most answered that they preform the wrist and ankle parts, where the body’s curvature is obvious. On the question regarding the “difficult manufacturing process“,the most frequent response was the “bonding” process. Most manufacturers were found to focus on designs that can improve mobility and clothing fit, and commonly experienced low-order quantity as an operational difficulty. As for the question on the wetsuit–related technology needed in the future, the “development of various designs” was the most frequent answer, followed by the “development of lightweight and diverse materials”.
Abstract
The present study examines the overall manufacturing status of local wetsuit makers, problems in the manufacturing process, and future research tasks. The study revealed that most manufacturers use neoprene fabric of varying thickness, depending on the body part. Normally, 3 mm–thick fabric is utilized for high-activity body parts and 5 mm–thick fabric is used for high-activity areas requiring thermal insulation. In terms of the manufacturing method, the tools and manufacturing processes used by companies were found to be similar. However, because of the nature of wetsuits requiring a more complicated manufacturing method than that of general clothing, there were some differences in the manufacturing method processes from company to company, such as bonding and ease treatments. According to wetsuit manufacturers, they make incisions in consideration of the body’s curvature and the overall shape and design of the wetsuit when developing patterns. For example, most answered that they preform the wrist and ankle parts, where the body’s curvature is obvious. On the question regarding the “difficult manufacturing process“,the most frequent response was the “bonding” process. Most manufacturers were found to focus on designs that can improve mobility and clothing fit, and commonly experienced low-order quantity as an operational difficulty. As for the question on the wetsuit–related technology needed in the future, the “development of various designs” was the most frequent answer, followed by the “development of lightweight and diverse materials”.
참고문헌 (20)
- 강우섭, "스쿠버다이빙 참여동기와선택속성 및 행복감의 관계", 한국스포츠코칭학회지, 1(1), pp.11~19 (2015)
- 김명훈, "저 수온에서의 잠수가 신체 활력 징후 및 추위 인식도에 미치는 효과", 수산해양교육연구, 29(4), pp.1063~1071 (2017), 한국수산해양교육학회[DOI]
- 김지우, "라이프 스타일 요인에 따른 웨트슈트(wetsuits) 선택속성, 인구통계적 특성, 구매행동 차이에 관한 연구", 한국의류산업학회지, 21(1), pp.46~58 (2019), 한국의류산업학회[DOI]
- 김지우, "웨트슈트 디자인 경향 및 소비자 선호 분석", 한국의상디자인학회지, 22(4), pp.127~142 (2020), 한국의상디자인학회[DOI]
- 김태중, "지역별 레저스포츠 시설업 비교우위 분석", 한국스포츠산업경영학회지, 25(4), pp.113~124 (2020), 한국스포츠산업경영학회
- 김진성, "스쿠버다이빙 참여자의 매니아 되기 과정", 한국스포츠사회학회지, 21(2), pp.267~283 (2008), 한국스포츠사회학회[DOI]
- 김혜림, "시판 습식방수복의 부위별 소재 특성 및 보온성 평가", 한국섬유공학회지, 53(4), pp.229~240 (2016), 한국섬유공학회
- 김효숙, "테크니컬 다이빙 슈트 개발을 위한 잠수복 동향 분석 - 습식 잠수복과 반건식 잠수복을 중심으로 -", 한국의상디자인학회지, 22(3), pp.33~47 (2020), 한국의상디자인학회[DOI]
- 박상훈, "해양레저 경험이 재미요인과 행동의도에 미치는 영향 - 스쿠버다이빙을 중심으로 -", Tourism Research, 39(3), pp.25~43 (2014), 한국관광산업학회
- 안현균, "익스트림 스포츠 참여자의 하위 문화적 특성", 한국체육학회지, 56(5), pp.147~156 (2017), 한국체육학회
- 임봉우, "스킨‧스쿠버 활동에서 타인과 관계의 의미에 관한 사례연구", 한국융합과학회지, 9(3), pp.361~372 (2020), 한국융합과학회
- 최진희, "국내 남성용 스킨스쿠버복 생산실태 및 소비자 만족도", 한국의류학회지, 33(11), pp.1683~1695 (2009), 한국의류학회
- 허희진, "웨트수트 착용실태 및 제품개발을 위한 사이즈 체계 조사 -국내 브랜드와 수입 브랜드의 비교를 중심으로-", 한국의류학회지, 39(3), pp.408~418 (2015), 한국의류학회
- "해양레저관광 활성화 대책" (2019)[URL]
- Jana, P., "Assembling technologies for functional garments—An overview", Indian Journal of Fibre & Textile Research, 36, pp.380~387 (2011)
- Radhakrishnan, S., "Seams for Protective Clothing–An Overview", World Journal of Textile Engineering and Technology, 3, pp.16~23 (2017)
- Naebe, M., "Assessment of performance properties of wetsuits", Journal of Sports Engineering and Technology, 227(4), pp.255~264 (2013)
- Martin, S. L, "Building and Testing an Incompressible Thermally Insulating Cold Temperature Diving Wetsuit" (2020), Naval Postgraduate School
- Dawn Michaelson, "Scuba Diver's Use of Selection Criteria for Assessing Wetsuit Using FEA Model", International Journal of Costume and Fashion, 18(2), pp.45~64 (2018), 한국복식학회[DOI]
- 오희경, "A study of the improvement of foam material sealing technology for wetsuits", Fashion and Textiles, 6(1), pp.1~15 (2019), 한국의류학회[DOI]