니트웨어의 외관향상을 위한 소매 암홀 형태
Forms of Armhole for Improving the Appearance of Knitwear
0
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
This article investigates the production process of knitwear focused on patterns and armhole forms in order to provide basic data for its value-added production. This study was based on empirical data obtained by questionnaires given to 51 respondents employed at knitwear companies. The data had been statistically analyzed with frequency analysis, one-way ANOVA, and Duncan test. The results of this study are the following: First, many knitwear companies used knitting machines, which had gauges as high as 14G. Second, most knitwear companies did not use patterns in the production process. Third, most knitwear companies produced knitwears in which armhole lines were different between the front part and back part of the body, while identical between the front and back parts of the sleeves. Fourth, people with experience in the knitwear industry had the tendency to recognize that armhole lines should be different between the front part of both the body and sleeves and their back part as well, and workers in charge of knitting recognized better than programmers and designers did. Considering the opinions of experienced workers that armhole lines differ between the front and back parts of both the body and sleeves would improve the appearance of knitwear, this study also suggests knitwear patterns of 10G and 16G by using ESMODE's basic knitwear pattern.
Abstract
This article investigates the production process of knitwear focused on patterns and armhole forms in order to provide basic data for its value-added production. This study was based on empirical data obtained by questionnaires given to 51 respondents employed at knitwear companies. The data had been statistically analyzed with frequency analysis, one-way ANOVA, and Duncan test. The results of this study are the following: First, many knitwear companies used knitting machines, which had gauges as high as 14G. Second, most knitwear companies did not use patterns in the production process. Third, most knitwear companies produced knitwears in which armhole lines were different between the front part and back part of the body, while identical between the front and back parts of the sleeves. Fourth, people with experience in the knitwear industry had the tendency to recognize that armhole lines should be different between the front part of both the body and sleeves and their back part as well, and workers in charge of knitting recognized better than programmers and designers did. Considering the opinions of experienced workers that armhole lines differ between the front and back parts of both the body and sleeves would improve the appearance of knitwear, this study also suggests knitwear patterns of 10G and 16G by using ESMODE's basic knitwear pattern.
참고문헌 (19)
- 2005년 의류실태조사보고서, "한국섬유산업연합회", 한국섬유산업연합회, 18~26 (2006)
- 이윤미, "니트제품 시뮬레이션을 위한 SDS-ONE의 Paint 기능활용", 2006 패션정보와 기술, pp.32~ (2006), 한국의류학회지
- 이정란, "팔의 유형화와 상반신 부분 체형과의 대응에 관한 연구", 한국의류학회지, 23(6), pp.864~875 (1999)
- 홍수숙, "Plain 조직 니트 의류의 소매산 형태 연구", 복식문화연구, 14(3), pp.404~417 (2006), 복식문화학회
- 이윤미, "니트제품 생산업체 디자인 기획 및 생산 현황에 관한 연구", 복식문화연구, 12(2), pp.300~311 (2004), 복식문화학회
- 김영주, "Knit Apparel", pp.365~366 (2003), 한양여대 니트연구소
- 김경미, "니트웨어 토르소, 슬리브 원형설계", 석사, pp.2003
- 심지민, "니트의류를 위한 기본원형에 관한 연구", 석사, pp.1999
- 양수영, "횡편물의 드레이프성에 다른 Torso Pattern의 개발", 석사, pp.1998
- 윤혜준, "니트웨어 소재특성에 따른 패턴개발연구", 석사, pp.2001
- 허은영, "니트의류 제품의 패턴 제작 시 신장특성 적용에 관한 연구", 박사, pp.2003
- 김수아, "Rib 조직의 특성을 고려한 니트패턴연구", 석사, pp.2004
- 심지민, , Op. cit, pp.84~ (1999)
- KRISS-97- 114-IR, "국민표준체위 조사 보고서", 국립기술품질원, ~ (1997)
- 허은영, , Op cit, pp.199~200 (2003)
- 김경미, , Op. cit, pp.14~ (2003)
- 三吉滿智子, "복장조형학", pp.269~ (2002), 교학연구사
- 김순분, "상완부 및 진동형태에 관한 연구", 한국복식학회지, 30, pp.201~210 (1996)
- 유화숙, "편물이론", pp.131~ (1997), 한국산업인력공단