무봉제 니트웨어의 소매디자인 향상을 위한 연구
A study on the improvement of seamless knitwear sleeve design
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The purpose of the study is to derive an appropriate knitting method that can increase the appearance, wearability, and functionality through empirical research on the sleeve height knitting ratio of seamless knit wear. The study was conducted by producing seven types of experiment clothes according to knitting ratio to examine the characteristics according to the body armhole and sleeve height ratio. Specifically, after fit evaluatins, variance analysis (ANOVA) was performed to analyze the results of the evaluation, and the evaluated contents were converted into data. Among them, the items with significant results were intensively studied using the Duncan-test. The result showed that the height and the width of the sleeves vary depending on the knitting ratio. Test sweater A was the highest at 16cm, followed by test sweater B, test sweater C, test sweater D, test sweater E, test sweater F, and test sweater G at 4cm. The 1:1 ratio of test sweater A, was the highest, which is knitted in the same course as the body. The larger the difference in the ratio of body and sleeve, the lower the height of the sleeves. As a result of the appearance sensory evaluation, a significant difference was confirmed in the result values (p<0.001) from all items on the front, side, and rear. Specifically, the appearance of the test sweater B(2:4:2) on the front and test sweater C(2:4:3) on the side and rear side was the best. When the sleeves height is properly set, the ratio of the arm line to fit the design with a natural curve is analyzed as a very important factor. The results of this study are expected to be of practical use in product development and production that can increase the feeling when wearing and design satisfaction.
Abstract
The purpose of the study is to derive an appropriate knitting method that can increase the appearance, wearability, and functionality through empirical research on the sleeve height knitting ratio of seamless knit wear. The study was conducted by producing seven types of experiment clothes according to knitting ratio to examine the characteristics according to the body armhole and sleeve height ratio. Specifically, after fit evaluatins, variance analysis (ANOVA) was performed to analyze the results of the evaluation, and the evaluated contents were converted into data. Among them, the items with significant results were intensively studied using the Duncan-test. The result showed that the height and the width of the sleeves vary depending on the knitting ratio. Test sweater A was the highest at 16cm, followed by test sweater B, test sweater C, test sweater D, test sweater E, test sweater F, and test sweater G at 4cm. The 1:1 ratio of test sweater A, was the highest, which is knitted in the same course as the body. The larger the difference in the ratio of body and sleeve, the lower the height of the sleeves. As a result of the appearance sensory evaluation, a significant difference was confirmed in the result values (p<0.001) from all items on the front, side, and rear. Specifically, the appearance of the test sweater B(2:4:2) on the front and test sweater C(2:4:3) on the side and rear side was the best. When the sleeves height is properly set, the ratio of the arm line to fit the design with a natural curve is analyzed as a very important factor. The results of this study are expected to be of practical use in product development and production that can increase the feeling when wearing and design satisfaction.
참고문헌 (21)
- 강희명, "현대니트패션디자인에 나타난 지속가능성 경향 연구", 패션과 니트, 18(1), pp.70~75 (2020), 한국니트디자인학회[DOI]
- 기희숙, "무봉제 니트" (2020), 부크크
- 기희숙, "무봉제 니트웨어의 네크디자인 향상을 위한 연구 - V-네크 풀오버의 네크단 편성방법을 중심으로 -", 한국의상디자인학회지, 21(4), pp.69~79 (2019), 한국의상디자인학회[DOI]
- 기희숙, "무봉제 스웨터의 몸판과 소매 연결 부위의 디자인에 관한 연구 -몸판과 소매 연결 부위의 편성 방법을 중심으로-", 한국의상디자인학회지, 12(4), pp.137~147 (2010), 한국의상디자인학회
- 기희숙, "니트 플레어스커트의 입체형상 평가를 통한 무봉제 편성방법 연구", 박사, 의류학, pp.2006
- 권성하, "자카드 조직을 이용한 무봉제 효과 니트웨어 개발", 한국의류산업학회지, 11(3), pp.488~495 (2009), 한국의류산업학회
- 권진, "위상기하학적 측면에서 본 홀가먼트의 디자인 특성", 한국디자인문화학회지, 12(1), pp.71~81 (2006), 한국디자인문화학회
- 김미주, "무봉제 니트웨어의 네크 디자인에 관한 연구 - 라운드 네크 풀오버의 네크단 마무리 편성 방법을 중심으로 -", 한국의상디자인학회지, 14(4), pp.113~125 (2012), 한국의상디자인학회
- 김미주, "무봉제 니트웨어의 디자인 향상을 위한 제작방법 개선에 관한 연구", 박사, 의류학과, pp.2014
- 김미주, "무봉제 니트웨어의 변천에 관한 연구 -제작 기법을 중심으로-", 패션과 니트, 12(3), pp.39~53 (2014), 한국니트디자인학회[DOI]
- 신혜영, "섬유· 패션기업의 지속가능성 실천 평가 연구", 한국의류학회지, 38(2), pp.137~146 (2014), 한국의류학회
- 신혜영, "스마트 기술과 지속가능한 가치가 융합된 섬유·패션 디자인 사례 연구", 한국디자인문화학회지, 23(2), pp.359~376 (2017), 한국디자인문화학회
- 이미숙, "무봉제 니트 원피스 드레스의 소매 편성 방법 - 겨드랑 부위의 바인드 오프 처리 분량을 중심으로 -", 복식문화연구, 17(6), pp.1059~1067 (2009), 복식문화학회[DOI]
- 이미숙, "무봉제 니트 원피스 드레스의 웨이스트 다트 편성 방법", 복식문화연구, 17(5), pp.769~779 (2009), 복식문화학회[DOI]
- 이유진, "고감성 니트디자인을 위한 무봉제 니트 조직패턴의 성능과 이미지간의 연구 (1) - 암홀 접속부(마치)의 역학적 특성을 중심으로 -", 패션 비즈니스, 16(1), pp.52~68 (2012), 한국패션비즈니스학회
- 이인숙, "니트 제품 생산 현황에 관한 연구", 패션과 니트, 15(3), pp.68~76 (2017), 한국니트디자인학회[DOI]
- 이인숙, "국내외 무봉제 니트웨어 디자인 경향", 패션 비즈니스, 15(1), pp.34~49 (2011), 한국패션비즈니스학회
- 이정은, "현대 패션에 나타난 무봉제 니트웨어의 조형성", 패션과 니트, 16(3), pp.53~58 (2018), 한국니트디자인학회[DOI]
- 임정순, "무봉제 니트웨어 원피스디자인에 관한 연구-제작기법을 중심으로-", 패션과니트, 3(2), pp.1~12 (2005)
- 정주희, "홀가먼트(Whole Garment)를 이용한 패션 디자인 연구 : 여성복을 중심으로", 석사, 의상디자인, pp.2004
- "Shima Seiki corporate profile 브로셔" (2011)[URL]