도시철도 차량 차륜의 피로강도 평가
Evaluation of Multiaxial Fatigue Strength of a Urban Railway Wheel Steel
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Uniaxial and biaxial torsional fatigue tests were conducted on the samples extracted from urban railway wheel steel. Ultimate and yield strengths of the steel were 1027.7 MPa and 626 MPa, respectively. The uniaxial fatigue limit was 422.5 MPa, corresponding 67% of the ultimate tensile strength. The ratio of was 0.63. Fatigue strength coefficient and exponent were 1319.5 MPa and 0.339, respectively. Maximum principal and equivalent strain were found to be adequate parameter to predict fatigue lifetime of the steel under multiaixal fatigue condition.
Abstract
Uniaxial and biaxial torsional fatigue tests were conducted on the samples extracted from urban railway wheel steel. Ultimate and yield strengths of the steel were 1027.7 MPa and 626 MPa, respectively. The uniaxial fatigue limit was 422.5 MPa, corresponding 67% of the ultimate tensile strength. The ratio of was 0.63. Fatigue strength coefficient and exponent were 1319.5 MPa and 0.339, respectively. Maximum principal and equivalent strain were found to be adequate parameter to predict fatigue lifetime of the steel under multiaixal fatigue condition.
참고문헌 (8)
- A Bernasconi, "Multiaxial fatigue of a railway wheel steel under non-proportional loading", Int. J Fatigue, 28(5-6), pp.663~672 (2006)
- J. Ahlstrὂm, "Modified railway wheel steels: Production and evaluation of mechanical properties with emphasis on low-cycle fatigue behavior", Met. Mat. Trans. A, 40(7), pp.1557~1567 (2009)
- Y. Okagata, "Fatigue strength evaluation of the Japanese railway whee", Fatigue Frac. Eng. Mat. Struc, 30(4), pp.356~371 (2007)
- V. Wagner, "Cyclic deformation behaviour of railway wheel steels in the very high cycle fatigue (VHCF)regime", Int. J Fatigue, 33, pp.69~74 (2011)
- 허현무, "철도차량용 차륜재 물성시험 분석 연구", 한국철도학회 학술대회논문집, pp.153~157 (2004)
- 권석진, "고속철도용 차륜과 차축의 파괴역학적 특성", 한국정밀공학회지, 27(8), pp.28~34 (2010), 한국정밀공학회
- J.A. Bannantine, "Fundamentals of metal fatigue analysis" (1990), Prentice Hall Inc
- K. Dan Van, "Biaxial and Multiaxial Fatigue, European Group on Fracture", pp.479~496 (1989), Mechanical Engineering Publications