도시철도 차륜의 접촉피로 초기수명 평가
Estimation of Contact Fatigue Initiation Lifetime of an Urban Railway Wheel
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Rolling contact fatigue of an urban railway wheel was analysed during its rolling. A FEM analysis was performed using a 3D modelling of rail and wheel, considering the slope of the rail and nonlinear isotropic and kinematic hardening behavior of the rail and the wheel. The maximum von-Mises stress and contact pressure between the rail and wheel were 656.9 MPa and 1111.4 MPa, respectively, under axial load of 85 kN with friction coefficient of 0. The fatigue initiation life prediction relationships by strain-lifetime (ε-N) and Smith-Watson-Topper method were drawn for the wheel steel as follows: and . The fatigue lifetimes of the wheel due to rolling contact were determined to be infinite by ε-N and SWT methods.
Abstract
Rolling contact fatigue of an urban railway wheel was analysed during its rolling. A FEM analysis was performed using a 3D modelling of rail and wheel, considering the slope of the rail and nonlinear isotropic and kinematic hardening behavior of the rail and the wheel. The maximum von-Mises stress and contact pressure between the rail and wheel were 656.9 MPa and 1111.4 MPa, respectively, under axial load of 85 kN with friction coefficient of 0. The fatigue initiation life prediction relationships by strain-lifetime (ε-N) and Smith-Watson-Topper method were drawn for the wheel steel as follows: and . The fatigue lifetimes of the wheel due to rolling contact were determined to be infinite by ε-N and SWT methods.
참고문헌 (13)
- Uwe Zerbst, "Fracture Mechanics in Railway Applications - an Overview", Eng. Frac. Mech., 72, pp.163~194 (2005)
- 김청균, "레일-휠의 접촉면 경사도에 따른 응력-변위량의 거동특성에 관한 연구", 한국철도학회논문집, 7(3), pp.186~192 (2004), 한국철도학회
- M.Sraml, "Numerical Procedure for Predicting the Rolling Contact Fatigue Crack Initiation", Int. J. Fatigue, 25, pp.585~595 (2003)
- Y. Liu, "Analysis of Subsurface Crack Propagation Under Rolling Contact Loading in Railroad Wheels using FEM", Eng. Frac. Mech., 74, pp.2659~2674 (2007)
- S.P. Timoshenko, "Theory of elasticity, 3rd Ed", pp.414~418 (1970), McGraw-Hill Co
- Abaqus, "ABAQUS User's Manual, version 6.4", ~ (2003)
- Y.B. Guo, , Int. J. Fatigue, 26, pp.605~613 (2004)
- M. Wiest, "Assessment of Methods for Calculating Contact Pressure in Wheel-rail", swithch Contact, 2008, pp.265, 1439~1445
- J.A. Bannantine, "Fundamentals of Metal Fatigue Analysis" (1990), Prentice Hall
- 안종곤, "도시철도 차량 차륜재의 다축 피로강도 평가", 한국안전학회지, 27(2), pp.1~6 (2012), 한국안전학회[DOI]
- Y.Y. Jiang, "A Model for Rolling Contact Failure", Wear, 224(1), pp.38~49 (1999)
- K. Dan Van, "On a New Multiaxial Fatigue Limit Criterion: Theory and Application, In Biaxial and Multiaxial Fatigue, European Group on Fracture, EGF Publication 3", pp.479~496 (1989), Mechanical Engineering Publications
- 이희섭, "지하철 7호선 차륜의 구름 및 미끄럼 접촉으로 인한 피로손상 예측 연구", 석사, pp.2009