조적채움벽의 면외보강에 관한 연구
A study on out-of-plane strengthening of masonry-infilled wall
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Fiber-reinforced polymer reinforcement or polyurea reinforcement techniques are applied to strengthen unreinforced masonry walls (UMWs). The out-of-plane reinforcing effect of sprayed glass fiber-reinforced polyurea (GFRPU), which is a composite elastomer made of polyurea and milled glass fibers on UMW, is experimentally verified. The out-of-plane strengths and ductile behaviors based on various coating shapes are compared in this study. An empirical formula to describe the degree of reinforcement on the out-of-plane strength of the UMW is derived based on the experimental results. It is reported that the peak load-carrying capacity, ductility, and energy absorption capacity gradually improve with an increase in the strengthening degree or area. Compared with the existing masonry wall reinforcement method, the GFRPU technique is a construction method that can help improve the safety performance along with ease of construction and economic efficiency.
Abstract
Fiber-reinforced polymer reinforcement or polyurea reinforcement techniques are applied to strengthen unreinforced masonry walls (UMWs). The out-of-plane reinforcing effect of sprayed glass fiber-reinforced polyurea (GFRPU), which is a composite elastomer made of polyurea and milled glass fibers on UMW, is experimentally verified. The out-of-plane strengths and ductile behaviors based on various coating shapes are compared in this study. An empirical formula to describe the degree of reinforcement on the out-of-plane strength of the UMW is derived based on the experimental results. It is reported that the peak load-carrying capacity, ductility, and energy absorption capacity gradually improve with an increase in the strengthening degree or area. Compared with the existing masonry wall reinforcement method, the GFRPU technique is a construction method that can help improve the safety performance along with ease of construction and economic efficiency.
참고문헌 (13)
- Lantz L., "Blast protection of unreinforced masonry walls: A state-of-the art review", Advances in Civil Engineering, pp.8958429~ (2016)[DOI]
- RB²C, "Strengthening of infill masonry walls using bondo grids with polyurea, Research results", ~ (2005)
- Myers J.J, "In-plane behavior of alternaive masonry retrofitted with polyurea membranes", Structural Faults and Repair (SF&R 2010) (2010)
- Greene, C. E., "Compressive behavior of concrete cylindersstrengthened with a discrete fiber reinforced polymer system", M.S, pp.2010
- Wu G., "Blast response of clay brick masonry unit walls unreinforced and reinforced with polyurea wlastomer", Defence Technology, 11 (2021)
- Song, J.H, "A Study on the Improvement of Structural Performance by Glass Fiber-Reinforced Polyurea(GFRPU)Reinforcement", Advances in Civil Engineering (2019)
- Song, J.H, "Shear strength of reinforced concrete columns retrofitted by glass fiber reinforced polyurea", Civil Engineering Journal, 6(10), pp.1852~1863 (2020)
- Song, J.H, "A study on the strengthening performance of concrete beam by fiber-reinforced polyurea (FRPU)reinforcement", Advances in Civil Engineering (2020)
- Song, J.H., "Improvement of flexural and shear strength of RC beam reinforced by glass fiber-reinforced polyurea(GFRPU)", Civil Engineering Journal (2021)
- 손승환, "유리섬유와 폴리우레아의 합성재료에 의한 조적벽의 면내방향 보강효과에 관한 연구", 석사, pp.2021
- 한국산업표준, "시멘트 모르타르 압축강도 시험방법 (KS L 5105)", 한국표준협회, ~ (2007)
- "ASTM C1314, Standard test method for compressive strength of masonry prisms", ASTM International, ~ (2014)
- 한국시설안전공단 시설관리본부, "기존 시설물(건축물)내진성능 평가요령", 한국시설안전공단, ~ (2019)