복근 메쉬 자동화 기기 시스템 개발
Development of Dual Mesh Automation Device System
0
조회
0
다운로드
7
인용
0
참고문헌
키워드
초록
The development of this technology produced the design of welding mesh automation system and obtained the following results. 1. The performance criteria of this research and development were higher than this, resulting in more than 300 N/㎟ of disconnection and more than 250N/㎟ of double wire. Double wire also obtained values of as low as 521 N/㎟ and as high as 623 N/㎟ 2. We compared the bending strength of the single mesh and the dual mesh by the bending test, and the result is 1692N of the average of single-mesh and 487N of double wire welded mesh. 3. As a result of the test, 64 minutes of abs of 5mm wire were 112 minutes of each. The welding speed was constant and stable.
Abstract
The development of this technology produced the design of welding mesh automation system and obtained the following results. 1. The performance criteria of this research and development were higher than this, resulting in more than 300 N/㎟ of disconnection and more than 250N/㎟ of double wire. Double wire also obtained values of as low as 521 N/㎟ and as high as 623 N/㎟ 2. We compared the bending strength of the single mesh and the dual mesh by the bending test, and the result is 1692N of the average of single-mesh and 487N of double wire welded mesh. 3. As a result of the test, 64 minutes of abs of 5mm wire were 112 minutes of each. The welding speed was constant and stable.
참고문헌 (4)
- P. J. Lunde, "Solar Thermal Engineering", pp.280~290 (1980), John Wiley and sons
- 이춘원, "공동주택 층간소음분쟁에 관한 연구", 집합건물법학, 15, pp.45~64 (2015), 한국집합건물법학회
- B. H. Amstead, "Manufacturing Processes", 130~133 (1998)
- 조영국, "펄라이트를 이용한 방음벽의 흡음소재 개발에 관한 기초적 연구", 콘크리트학회 논문집, 20(5), pp.653~660 (2008), 한국콘크리트학회