내장용 철망 클립성형 장치 개발
Development of wire Mesh Clip Forming Device for Interior Use
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The existing wire mesh clip forming process requires improvement as the production process is semi-automatic, which greatly threatens the safety of workers and exposes them to labor intensity and industrial accidents. In this research and development, we designed and developed an automated wire mesh automatic clip system by improving problems in the existing welded wire mesh production process. As a result, the production volume per hour was improved from 450 to 516, and the clip formation time was improved, shortening the production time to 42.5 seconds. Additionally, the defect rate was reduced from 7% to less than 3%.
Abstract
The existing wire mesh clip forming process requires improvement as the production process is semi-automatic, which greatly threatens the safety of workers and exposes them to labor intensity and industrial accidents. In this research and development, we designed and developed an automated wire mesh automatic clip system by improving problems in the existing welded wire mesh production process. As a result, the production volume per hour was improved from 450 to 516, and the clip formation time was improved, shortening the production time to 42.5 seconds. Additionally, the defect rate was reduced from 7% to less than 3%.
참고문헌 (5)
- C. S. Kim, "An Experimental Study on the Waveform Factors of Electronically-controlled Vehicles for the Reduction of Fuel Consumption by Decrepit Vehicles", Journal of Korean Society of Mechanical Technology, 15(3), pp.319~325 (2013)
- B. H. Amstead, "Manufacturing Processes", pp.130~133 (1998)
- Y. K. Kwon, "A Development of Ring Binder", Jou. of Korea Soc. of Mechanical Technology, 12, pp.189~190 (2010)
- K. N. Park, "Development of HANARO Reflectometer Shield", Jou. of Korea Soc. of Mechanical Technology, 8, pp.171~173 (2006)
- W. S. Lee, "Development of Dual Mesh Automation Device System", J. Korean Soc. Mesh. Technol, 21(5), pp.968~975 (2019)