공조용 이중라인 동관공급튜브 생산시스템 개발
Development of a Dual-line Copper Pipe Supply Tube Production System for Air Conditioning
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This study improved the work efficiency by supplementing the shortcomings of the manual process by developing a double tube feeding device, and the following results were obtained by conducting the production capacity, production length, and defect rate tests. Developed a double tube production system to enable the simultaneous production of two tubes, increasing the production volume by about 1.5 times. The product length has been improved from semi-automatic to automated, and the production capacity has been improved from 16 to 25 pieces per hour (based on 15m). Developed a double-tube input straight line automatic adjustment feeder, which resulted in reducing the defect rate to less than 1%.
Abstract
This study improved the work efficiency by supplementing the shortcomings of the manual process by developing a double tube feeding device, and the following results were obtained by conducting the production capacity, production length, and defect rate tests. Developed a double tube production system to enable the simultaneous production of two tubes, increasing the production volume by about 1.5 times. The product length has been improved from semi-automatic to automated, and the production capacity has been improved from 16 to 25 pieces per hour (based on 15m). Developed a double-tube input straight line automatic adjustment feeder, which resulted in reducing the defect rate to less than 1%.
참고문헌 (5)
- K. N. Park, "Development of HANARO Reflectometer Shield", Jou. of Korea Soc. of Mechanical Technology, 8, pp.171~173 (2006)
- P. J. Lunde, "Solar Thermal Engineering", pp.280~290 (1980), John Wiley and sons
- C. S. Kim, "An Experimental Study on the Waveform Factors of Electronically controlled Vehicles for the Reduction of Fuel Consumption by Decrepit Vehicles", Journal of Korean Society of Mechanical Technology, 15(3), pp.319~325 (2013)
- B. H. Amstead, "Manufacturing Processes", pp.130~133 (1998)
- Y. K .Kwon, "A Development of Ring Binder", Jou. of Korea Soc. of Mechanical Technology, 12, pp.189~190 (2010)