2.9리터 IDI(indirect injection) 엔진용 피스톤의 열전달 해석결과인 열전도로 인한 온도분포를 입력값으로 활용한 열응력 연성 해석
Coupled Simulation of Thermal Stress by using Input Values Through Temperature Distribution by Thermal Conduction After Heat Transfer Analysis for 2.9 Liter Indirect Injection Engine Piston
0
조회
0
다운로드
7
인용
0
참고문헌
키워드
초록
In this analysis, the analytical model was verified through the normal mode analysis of the piston for the 2.9 liter IDI (indirect injection) engine. Heat transfer analysis was carried out by selecting two cases of applied temperature using the validated model. The first case was a condition of 350℃ on the piston upper surface and 100℃ on the piston body and inner wall. In the second case, the conditions were set to give a temperature of 400℃ on the upper surface of the piston and 100℃ on the piston body and the inner wall. In addition, the temperature distribution due to heat transfer was obtained for the pistons with boundary conditions of two cases, and then the thermal stress distribution due to thermal expansion was obtained using the input. Using this analysis result, the thermal stress caused by thermal expansion due to the thermal conduction of the piston is examined and used as the basic data for design.
Abstract
In this analysis, the analytical model was verified through the normal mode analysis of the piston for the 2.9 liter IDI (indirect injection) engine. Heat transfer analysis was carried out by selecting two cases of applied temperature using the validated model. The first case was a condition of 350℃ on the piston upper surface and 100℃ on the piston body and inner wall. In the second case, the conditions were set to give a temperature of 400℃ on the upper surface of the piston and 100℃ on the piston body and the inner wall. In addition, the temperature distribution due to heat transfer was obtained for the pistons with boundary conditions of two cases, and then the thermal stress distribution due to thermal expansion was obtained using the input. Using this analysis result, the thermal stress caused by thermal expansion due to the thermal conduction of the piston is examined and used as the basic data for design.
참고문헌 (14)
- 홍은지, "경량 단조 피스톤 기술 개발", 한국자동차공학회 논문집, 25(1), pp.111~115 (2017), 한국자동차공학회[DOI]
- J. I. Choi, "A Study on Aluminum Automotive Piston by Thioforging", Journal of the KSPE, 25(1), pp.136~144 (2006)
- 김민석, "열처리 및 단조조건에 따른 알루미늄 6056 소재의 특성변화 및 자동차의 피스톤 블록 설계", 한국재료학회지, 25(10), pp.552~558 (2015), 한국재료학회
- J. D. Davis, "ASM Specialty Handbook", pp.678~689 (1993)
- S. W. Choi, "Heat Transfer Analysis of Piston on Medium Speed Desel Engine", Proc. of the Korean Society of Mechanical Engineers Spring Conference, pp.1522~1527 (2011)
- N. Jo, "Study on the Heat Transfer Analysis of Piston on Single Cylinder Diesel Engine", Proc. of the Korean Society of Automotive Engineers Autumn Conference, pp.1005~ (2016)
- Y. Lu, "Analysis of thermal temperature fields and thermal stress under steady temperature field of diesel engin piston", Journal of Thermal Engineering, 113, pp.796~812 (2017)
- M. Cerit, "Temperature and thermal stress analyses of a ceramic-coated aluminum alloy piston used in a diesel engine", International Journal of Thermal Sciences, 77, pp.11~18 (2014)
- B. Zhao, "Thermal Stress Analysis of Ceramic- Coated Diesel Engine Pistons on the Wavelet Finite-Element Method", Journal of Engineering Mechanics, 138(1), pp.143~149 (2012)
- K. Sim, "Verifying Coupled Thermodynamics Analytical Model considering Heat Transfer Characteristics of Free-Piston Stirling Engine", Proc. of the Korean Society for Noise and Vibration Engineering, Spring Conference, pp.320~ (2018)
- W. Ostapski, "Analysis of Thermo-Mechanical Response in an Aircraft Piston Engine by Analytical, FEM, and Test-Stand Investigations", Journal of Thermal Stresses, 34(3), pp.285~312 (2011)
- 최승훈, "고점도 바이오디젤의 간접분사식 디젤기관 적용", 한국기계기술학회지, 18(4), pp.579~584 (2016), 한국기계기술학회[DOI]
- 김은성, "간접분사방식 기관에 대한 연료와 배기가스재순환의 적용", 한국기계기술학회지, 15(3), pp.391~394 (2013), 한국기계기술학회[DOI]
- A. K. Hossain, "Performance, emission and combustion characteristics of an indirect injection(IDI) multi-cylinder compression ignition(CI) engine operating on neat jatropha and karanj oils preheated by jacket water", Biomass and bioenergy, 46, pp.332~342 (2012)