운전조건 하에서의 터보차저 커플링계의 역학적 거동에 관한 연구
A Study on the Mechanical Behaviors of the Turbocharger’s Coupling System Under Operation Condition
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Coupling is commonly used as a mechanical fastener to connect the turbine housing and the bearing housing in a turbocharger assembly. The finite element analysis was used to predict the structural behaviors of the coupling system, which could be caused by the bolt clamping force in the assembly process and the thermal deformation during turbocharger operation. The back plate is used to prevent gas leakage from the turbine housing to the bearing housing while the fixed pin is inserted to set the reference position between the two parts. Thus, in order to predict the mechanical behaviors of the coupling system numerically, the temperature distributions were calculated by heat transfer analysis based on the rated speed of the diesel engine. As a result of analyzing the structural characteristics of the turbocharger, the contact pressure of the back plate was influenced by thermal deformations whereas the bending deformation of the fixed pin was affected by the thermal deformation and the pin position.
Abstract
Coupling is commonly used as a mechanical fastener to connect the turbine housing and the bearing housing in a turbocharger assembly. The finite element analysis was used to predict the structural behaviors of the coupling system, which could be caused by the bolt clamping force in the assembly process and the thermal deformation during turbocharger operation. The back plate is used to prevent gas leakage from the turbine housing to the bearing housing while the fixed pin is inserted to set the reference position between the two parts. Thus, in order to predict the mechanical behaviors of the coupling system numerically, the temperature distributions were calculated by heat transfer analysis based on the rated speed of the diesel engine. As a result of analyzing the structural characteristics of the turbocharger, the contact pressure of the back plate was influenced by thermal deformations whereas the bending deformation of the fixed pin was affected by the thermal deformation and the pin position.
참고문헌 (10)
- Y. Choi, "Status of Domestic Turbocharger Technology", Auto Journal, 35(12), pp.57~62 (2013)
- R. Marman, "Design of clamp joints, Engineering Designer", pp.37~40 (1980)
- C. Hudson, "V-clamps solve flange clamping problems", pp.203~204 (1977)
- K. Shoghi, "Axial Load Capacity of V-Section band Clamp Joints", 8th International Conference on Turbochargers and Turbocharging, pp.273~285 (2006)
- Z. Y. Qin, "Analytical modeling of clamp band joint under external bending moment", Aerospace Science and Technology, 25, pp.45~55 (2013)[DOI]
- Z. Y. Qin, "Finite element analysis of the clamp band joint", Applied Mathematical Modelling, 36, pp.463~477 (2012)[DOI]
- 이인범, "유한요소법에 의한 터보차저 커플링계의 실링성 예측에 관한 연구", 한국기계기술학회지, 18(6), pp.860~866 (2016), 한국기계기술학회[DOI]
- 홍성기, "이론 및 해석적 방법에 의한 터보차저 커플링 구조의 백플레이트 접촉압력 예측", 한국기계기술학회지, 20(2), pp.174~179 (2018), 한국기계기술학회[DOI]
- Altair Engineering, Inc., "Altair Hyperworks 8.0" (2006)
- ABAQUS, Inc., "ABAQUS Analysis User's Manual Vol. III : Materials. Ver. 6.5" (2004)