사출성형에서 유동선단과 구조물의 유동편차에 대한 연구
A Study on The Flow Deviation of Flow Front and Structure in Injection Molding
5
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Plastic products molded by injection molding have become an essential element of our lives. In addition, plastics can replace parts that used to be metal in the past. Plastic molded products used as a part of a mechanical system require high precision. At the same time, the appearance quality of molded products is also an important evaluation factor. The appearance quality of a molded product is affected by injection molding conditions, plastic material fluidity, and the condition of the mold surface. In this study, the cause of the short shot of the dog house, which functions to assemble the plastic tailgate parts for automobiles, was analyzed. In order to solve the short shot problem of the dog house, the root thickness of the dog house, injection molding conditions, and fluidity of plastic materials were experimented. Through the injection molding experiment, it was found that when the dog house root thickness was increased from 0.8mm to 1.2mm, the filling amount of the doghouse part increased by 43% in experiment mold. These results were verified by injection molding analysis.
Abstract
Plastic products molded by injection molding have become an essential element of our lives. In addition, plastics can replace parts that used to be metal in the past. Plastic molded products used as a part of a mechanical system require high precision. At the same time, the appearance quality of molded products is also an important evaluation factor. The appearance quality of a molded product is affected by injection molding conditions, plastic material fluidity, and the condition of the mold surface. In this study, the cause of the short shot of the dog house, which functions to assemble the plastic tailgate parts for automobiles, was analyzed. In order to solve the short shot problem of the dog house, the root thickness of the dog house, injection molding conditions, and fluidity of plastic materials were experimented. Through the injection molding experiment, it was found that when the dog house root thickness was increased from 0.8mm to 1.2mm, the filling amount of the doghouse part increased by 43% in experiment mold. These results were verified by injection molding analysis.
참고문헌 (11)
- 이민, "수지의 종류와 사출성형품의 리브 설계가 휨에 미치는 영향", 한국기계기술학회지, 14(2), pp.59~65 (2012), 한국기계기술학회[DOI]
- 한성렬, "자동차 스티어링 휠에 조립되는 플라스틱 베젤의 변형 최적화에 관한 연구", 한국기계가공학회지, 16(5), pp.105~112 (2017), 한국기계가공학회[DOI]
- Hwang, S. H., "A study on the prediction and improvement of warpage in injection molding process of plastic automobile Part", Master, pp.2017
- Cha, K. J., "Flow analysis of super engineering plastic plunger in automobile ABS", Proc. of the KSMPE Autumn Conference, pp.156~ (2015)
- 홍청민, "사출성형에서 수지의 색상과 수축에 관한 연구 : PC와 PBT 수지를 중심으로", 한국기계기술학회지, 21(4), pp.715~722 (2019), 한국기계기술학회[DOI]
- 고병두, "자동차용 시트백 커버의 저압사출성형에 관한 연구", 한국정밀공학회지, 25(12), pp.100~106 (2008), 한국정밀공학회
- Shin, D. G., "A study on the monitoring technique for the venting defect in injection mold", Master, pp.2017
- Oh, I. S., "Injection mold design with a harmonica core and vacuum system", J. of KSME, pp.642~645 (2014)
- 박기윤, "사출성형 시뮬레이션에 의한 휴대폰 스피커 인클로저의 에어트랩 위치 최적화", 한국기계가공학회지, 10(5), pp.85~90 (2011), 한국기계가공학회
- Jang, J. H., "A study on filling pattern of thin- plate according to melt temperature in CAE of injection molding", J. of KSMTE, pp.117~117 (2014)
- Han, S. R., "Basic and know-how of plastic injection mold design", pp.97~99 (2019), WisdomPL Publication