여러 형상의 홈을 갖는 복합재 Z-pin의 인발특성 연구
A Study on the Pull-out Characteristics of Composite Z-pin with Various Groove Shapes
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this paper, the pull-out characteristics of composite Z-pins with various groove shapes was investigated. The groove shape of composite Z-pins was made by applying temperature and pressure to the top and bottom of laminated composites inside the autoclave. Then, the dumbbell type of pull-out test specimen was made by applying adhesive bond. Six types of pull-out test specimens were fabricated by changing the groove length. Pull-out load and displacement sere observed for those specimens with different groove ratio. The results show that the maximum pull-out load of the grooved pin with grooved ratio 0.4 was increased up to 30.6% by comparing the plain pin. The grooved pin has a high pull-out resistance even after the fracture of the interface.
Abstract
In this paper, the pull-out characteristics of composite Z-pins with various groove shapes was investigated. The groove shape of composite Z-pins was made by applying temperature and pressure to the top and bottom of laminated composites inside the autoclave. Then, the dumbbell type of pull-out test specimen was made by applying adhesive bond. Six types of pull-out test specimens were fabricated by changing the groove length. Pull-out load and displacement sere observed for those specimens with different groove ratio. The results show that the maximum pull-out load of the grooved pin with grooved ratio 0.4 was increased up to 30.6% by comparing the plain pin. The grooved pin has a high pull-out resistance even after the fracture of the interface.
참고문헌 (8)
- AP Mouritz, "Review of z-pinned composite laminates", Composites Part A: Applied Science and Manufacturing, 38(12), pp.2383~2397 (2007)
- 정종설, "Interlaminar fracture toughness of CFRP laminates with silk fibers interleave", Journal of Mechanical Science and Technology, 27(12), pp.3651~3656 (2013), 대한기계학회[DOI]
- SS Wicks, "Interlaminar and intralaminar reinforcement of composite laminates with aligned carbon nanotubes", Composites Science and Technology, 70(1), pp.20~28 (2010)
- K. Dransfield, "Improving the delamination resistance of CFRP by stitching—a review", Composites Science and Technology, 50(3), pp.305~317 (1994)
- JS Jeong, "A study on the fracture characteristics of z-pinned carbon fiber reinforced composites", Ph.D, pp.2014
- SC Dai, "Experimental study on z-pin bridging law by pullout test", Composites Science and Technology, 64(16), pp.2451~2457 (2004)
- 심충기, "탄소섬유 Z-핀의 제작공정에 따른 인발특성", 한국기계기술학회지, 22(1), pp.118~124 (2020), 한국기계기술학회[DOI]
- CK Sim, "Pull-out Characteristics of Grooved Carbon Fiber Z-pins", The 10th Asian-Australasian Conference on composite materials, pp.2~17 (2016)