모터용 히트싱크 설계 조건별 냉각성능 비교
Comparison of Cooling Performance by Motor Heat Sink Design Condition
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, the cooling performance of the motor was analyzed according to the number and the length of the fins of the heat sink, and at the same time, the effect of forced convection on the cooling performance improvement by changing the air flow speed of the cooling fan was conducted. In order to find out the cooling performance in terms of turbulent kinetic energy, pressure, and temperature according to the number of heat sink fins, length of fins, and wind speed of the cooling fan, an aluminum heat sink was modeled according to the size of the motor. The heating value of the motor was calculated, and it was set to be the same under all analysis conditions. The turbulence model applied for numerical analysis in this study used the standard k-ε model. As a result, it was confirmed that the cooling effect of the heat sink increases as the air flow speed of the cooling fan, the number of fins, and the length of fins increase.
Abstract
In this study, the cooling performance of the motor was analyzed according to the number and the length of the fins of the heat sink, and at the same time, the effect of forced convection on the cooling performance improvement by changing the air flow speed of the cooling fan was conducted. In order to find out the cooling performance in terms of turbulent kinetic energy, pressure, and temperature according to the number of heat sink fins, length of fins, and wind speed of the cooling fan, an aluminum heat sink was modeled according to the size of the motor. The heating value of the motor was calculated, and it was set to be the same under all analysis conditions. The turbulence model applied for numerical analysis in this study used the standard k-ε model. As a result, it was confirmed that the cooling effect of the heat sink increases as the air flow speed of the cooling fan, the number of fins, and the length of fins increase.
참고문헌 (16)
- 권화빈, "공랭식 BLDC 모터의 효율 변화에 관한 수치 해석적 연구", 대한기계학회논문집 B, 42(10), pp.681~687 (2018), 대한기계학회
- D. Lee, "Design optimization for improving heat dissipation in BLDC motor", Master, pp.2019
- J. S. Kim, "Numerical Study on the Heat Transfer in an Electric Motor with Oil-Water Cooling to Achieve an Enhanced Cooling Performance", Doctor, pp.2018
- L. Zhang, "Thermofluidic Study of Electric Vehicle Motors with Various Motor Interior Shapes for Advanced Cooling Effects", Master, pp.2018
- J. S. Kim, "Characteristics Study of Various types of Heat Sinks made of Porous Aluminum", Master, pp.2002
- K. Kim, "A Study on Temperature Reduction by Fin Shape Optimization of Air-cooled Motor", Master, pp.2020
- Y. H. Lee, "A Study on the Heat Dissipation Characteristics of LED Flood Light according to Ambient Wind Speed", Doctor, pp.2019
- 이영호, "30W급 LED 투광등의 풍속에 따른 히트싱크 온도분포에 관한 실험적 연구", 한국기계가공학회지, 18(5), pp.96~102 (2019), 한국기계가공학회[DOI]
- 김성찬, "CPU 히트싱크에서 핀의 배열이 냉각성능에 미치는 영향에 대한 수치해석", 반도체디스플레이기술학회지, 15(3), pp.12~17 (2016), 한국반도체디스플레이기술학회
- 윤준규, "히트싱크의 형상변화에 따른 테스크탑 PC용 CPU냉각의 열전달특성에 관한 연구", 한국기계기술학회지, 22(1), pp.99~106 (2020), 한국기계기술학회[DOI]
- 권재현, "주거용 13.5W COB LED 다운라이트 방열판 설계에 따른 열적 특성 분석", 한국정보전자통신기술학회 논문지, 7(1), pp.20~25 (2014), 한국정보전자통신기술학회
- J. S. Hwan, "A Study on the Thermal Optimization of a heat sink shape and tip clearance", Master, pp.2012
- 한문식, "효율적인 열 방출을 하기 위한 방열판의 형상 설계에 관한 연구", 한국기계가공학회지, 15(5), pp.25~30 (2016), 한국기계가공학회[DOI]
- D. H. Kim, "A study on the heatsink for improving heat radiation performance of an 120w flood light", Master, pp.2016
- D. Moon, "A Study of the Heat Radiation Performance for COB LED on the Heatsink Structure", Master, pp.2015