바우싱거 효과가 자긴가공된 압력용기의 잔류응력 분포에 미치는 영향
Bauschinger Effect on the Residual Stress Distributions of an Autofrettaged Thick-Walled Pressure Vessel
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Application of a very high internal pressure on the thick-walled pressure vessel induces beneficial compressive tangential residual stresses near the bore of the pressure vessel after unloading the internal pressure. However, a reverse yielding due to the Bauschinger effect during the unloading process causes the reduction of the compressive residual stress near the bore. In order to evaluate the autofrettage residual stress distributions of the thick-walled pressure vessel, the Bauschinger effects were considered. Magnitudes of the compressive residual stresses at the bore determined by considering the Bauschinger effects decreased by about 25 percent, compared to the case of linear elastic unloading, i.e., without Bauschinger effects. Measured residual stress distributions agreed fairly well with the calculated distributions considering the Bauschinger effects.
Abstract
Application of a very high internal pressure on the thick-walled pressure vessel induces beneficial compressive tangential residual stresses near the bore of the pressure vessel after unloading the internal pressure. However, a reverse yielding due to the Bauschinger effect during the unloading process causes the reduction of the compressive residual stress near the bore. In order to evaluate the autofrettage residual stress distributions of the thick-walled pressure vessel, the Bauschinger effects were considered. Magnitudes of the compressive residual stresses at the bore determined by considering the Bauschinger effects decreased by about 25 percent, compared to the case of linear elastic unloading, i.e., without Bauschinger effects. Measured residual stress distributions agreed fairly well with the calculated distributions considering the Bauschinger effects.
참고문헌 (7)
- Hill, R., "Mathematical Theory of Plasticity" (1950), Oxford University Press
- Harvey, J. F., "Theory and Design of Pressure Vessels" (1991), Van Nostrand Reinhold
- 김병운, "압력용기용 Inconel 718 합금의 상온 및 고온에서의 저주기 피로특성에 관한 연구", 한국기계기술학회지, 19(1), pp.27~32 (2017), 한국기계기술학회[DOI]
- Milligan, R.V., "The Bauschinger Effect in a High-Strength Steel", J. Basic Engineering, 480(488), pp.480~488 (1966), American Society of Mechanical Engineers
- Parker, A.P., "Fatigue and Fracture Mechanics: 29th Volume, ASTM STP 1332", pp.565~583 (1996), American Society for Testing and Materials, West Conshohocken
- Kendall, D.P., "The Influence of the Bauschinger Effect on Re-yielding of Autofrettaged Thick- walled Cylinders", ASME PVP, 125, pp.17~21 (1987)
- Chen, P.C.T., "The Bauschinger and Hardening Effect on Residual Stresses in an Autofrettaged Thick-walled Cylinder", J. Pressure Vessel Technology, 108, pp.108~112 (1986)