고효율 교환 코어를 이용한 사출 시스템의 개발에 관한 연구
The Study of Mold Injection System used of High Efficiency Change Core
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, mold does not modify the overall. And core was developed as part of a separate. And not detached from the injection mold core part of the device only has to exchange. It has to perform the simulation of resin flow injection. Result of analysis, problems were observed. To create the change core of the four kinds of production prototypes and replace only with the exchange of change core operation of the injection. As a result, there were able to get a products with smooth surface.
Abstract
In this study, mold does not modify the overall. And core was developed as part of a separate. And not detached from the injection mold core part of the device only has to exchange. It has to perform the simulation of resin flow injection. Result of analysis, problems were observed. To create the change core of the four kinds of production prototypes and replace only with the exchange of change core operation of the injection. As a result, there were able to get a products with smooth surface.
참고문헌 (7)
- Wu, J. L., "Development of an On-Line Cavity Pressure-Based Export System for Injection Molding Process", pp.216~220 (1991), Antec
- Yao, D., "Direct Search-Based Automatic Minimization of Warpage and Weld lines in Injection Molded Parts", 석사, pp.1998
- Choi, D.S., "Prediction of shrinkage and warpage in consideration of residual stress in integrated simulation of infection molding", Composite Structures, 47, pp.655~665 (1999)
- Georg, M., "How to Make Injection Molds", pp.35~37 (2001), Hanser Gardner Publications, Inc
- Suzanne L. B., "Online Pattern-Based Part Quality monitoring of the Injection Molding Process", Polymer Eng. & Sci., 36(11) (1996)
- Leo, V., "The Effect of the Parking Parameters, Gate Geometry, And Mold Elasticity on the Final Dimensions of a Molded Part", Polymer Eng. & Sci., 36(15) (1996)
- 송준엽, "재생 관통형 형판구조의 사출금형 개발", 한국정밀공학회지, 20(6), pp.190~129 (2003), 한국정밀공학회