LPG / 가솔린 겸용차량의 점화시기 변환에 의한 엔진성능고찰
A Study on Engine Performance of the Ignition Spark Timing Conversion for LPG/Gasoline Bi-fuel Vehicle
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In a bi-fuel engine using gasoline and LPG fuel, with the current ignition timing for gasoline being used,the optimum performance could not be taken in LPG fuel supply mode. The ignition timing in LPG fuel mode must be advanced much more than that of gasoline mode for the compensation of its higher ignition temperature. The purpose of this study is to investigate how the ignition spark timing conversion influences the engine performance of LPG/Gasoline Bi-Fuel engine. In order to investigate the engine performance during combustion, engine performance are sampled by data acquisition system, for example cylinder pressure,pressure rise rate and heat release rate, while change of the rpm(1500, 2000, 2500) and the ignition timing advance(5°, 10°, 15°, 20°). As the result, between 1500rpm, 2000rpm and 2500rpm, the cylinder pressure and pressure rise rate was increased when the spark ignition was advanced but pressure rise rate at 20° was smaller value.
Abstract
In a bi-fuel engine using gasoline and LPG fuel, with the current ignition timing for gasoline being used,the optimum performance could not be taken in LPG fuel supply mode. The ignition timing in LPG fuel mode must be advanced much more than that of gasoline mode for the compensation of its higher ignition temperature. The purpose of this study is to investigate how the ignition spark timing conversion influences the engine performance of LPG/Gasoline Bi-Fuel engine. In order to investigate the engine performance during combustion, engine performance are sampled by data acquisition system, for example cylinder pressure,pressure rise rate and heat release rate, while change of the rpm(1500, 2000, 2500) and the ignition timing advance(5°, 10°, 15°, 20°). As the result, between 1500rpm, 2000rpm and 2500rpm, the cylinder pressure and pressure rise rate was increased when the spark ignition was advanced but pressure rise rate at 20° was smaller value.
참고문헌 (5)
- 전봉준, "LPG 및 Gasoline 겸용 차량의 엔진 점화시기 변환 제어시스템 개발", 한국마린엔지니어링학회지, 27(1), pp.117~123 (2003), 한국마린엔지니어링학회
- 海田健次, "LP ガス 自動車 構造取扱基準", 昭和 55年 3月 1日, ~
- A. Gerini, "Ultra low emission vehicle using LPG engine fuel", SAE paper 961079, ~ (1996)
- 박경석, "MPI엔진 제어를 위한 실시간 유량측정과 흡기유동 특성 해석", 박사, pp.1995
- LPG 자동차 연료장치의 구조기준(I, "II)", 지덕림, 1999, pp.39~
