불규칙 피로 하중을 받는 자동차의 컨트롤 암의 구조 해석
Structural Analysis on Control Arm of Automobile under Nonuniform Fatigue Load
1
조회
0
다운로드
10
인용
0
참고문헌
키워드
초록
This study analyzes structural stress and fatigue on control arm of automobile under nonuniform load. Maximum equivalent stress at bolt part is shown with 419.1MPa and the corner is deformed with maximum displacement of 1.1628mm. Among 3 cases of nonuniform fatigue loads applying on control arm, ‘SAE bracket history’ with the severest change of load becomes most unstable but ‘Sample history’ becomes most stable. In case of ‘Sample history’ with the average stress of -10^5 MPa to 10^5 MPa and the amplitude stress of 0 MPa to 10^5MPa, the possibility of maximum damage becomes 3%. This stress state can be shown with 6 times more than the damage possibility of ‘SAE bracket history’ or ‘SAE transmission’. Safety and durability on automobile can be effectively improved by applying the fatigue analysis result on control arm.
Abstract
This study analyzes structural stress and fatigue on control arm of automobile under nonuniform load. Maximum equivalent stress at bolt part is shown with 419.1MPa and the corner is deformed with maximum displacement of 1.1628mm. Among 3 cases of nonuniform fatigue loads applying on control arm, ‘SAE bracket history’ with the severest change of load becomes most unstable but ‘Sample history’ becomes most stable. In case of ‘Sample history’ with the average stress of -10^5 MPa to 10^5 MPa and the amplitude stress of 0 MPa to 10^5MPa, the possibility of maximum damage becomes 3%. This stress state can be shown with 6 times more than the damage possibility of ‘SAE bracket history’ or ‘SAE transmission’. Safety and durability on automobile can be effectively improved by applying the fatigue analysis result on control arm.
참고문헌 (6)
- 김정훈, "불법 과속방지턱에서 충돌 속도에 따른 로워암의 응력과 변형률 비교 분석", 한국 자동차 공학회 2005년도 추계학술대회 논문집, pp.1719~1724 (2005), 한국 자동차 공학회
- 허선철, "자동차엔진용 금속기 복합재료의 피로균열거동에 관한 연구", 한국자동차공학회 논문집, 11(5), pp.140~146 (2003), 한국자동차공학회
- 조재웅, "자동차 현가장치의 구조 강도 해석", 한국생산제조시스템학회지, 19(1), pp.89~93 (2010), 한국생산제조시스템학회
- 김태훈, "충돌형태에 따른 자동차 프레임 변형시 변형분석 및 차체수리에 관한 실험적 연구", 한국안전학회지, 17(2), pp.22~31 (2002), 한국안전학회
- 이우형, "차량용 서스펜디드 페달 구조체의 피로 내구 분석 및 설계 개선", 한국정밀공학회지, 26(7), pp.105~111 (2009), 한국정밀공학회
- Ansys 12.0, "Swanson, J", Ansys Inc, U.S.A., ~ (2009)