트위스트 스크린의 지지 프레임에 대한 최적화 설계 파라미터의 결정
Decision of Optimal Design Parameters for Supporting Frame in a Twist Screen
0
조회
0
다운로드
10
인용
0
참고문헌
키워드
초록
The object of this study is concerned about the optimal design of the supporting frame in a twist screen. Twist screen is widely used for grading and screening materials in the fields such as coal-selecting, mining-selecting, building materials, electrical power and chemical industry, etc. It is composed of base, supporting frame, vibrator, screen, spring, trough, clamp and etc. Especially, supporting frame in twist screen are stressed by high load, mostly it is shock-type loads. Nevertheless, design of base is dependent on experience, and it will cause reliability reduction and cost increase. The supporting plate is composed by the upper plate, the bracket and etc. This research purpose is to propose and verify a method to achieve higher product quality, lower costs, and far less physical testing. In this study, design parameters used for optimization are the upper plate thickness(8㎜, 10㎜, 12㎜) and the bracket thickness(8㎜, 10㎜, 12㎜) in the supporting frame. The result showed that base weight reduced to maximum 25.8% when compared with the current twist screen.
Abstract
The object of this study is concerned about the optimal design of the supporting frame in a twist screen. Twist screen is widely used for grading and screening materials in the fields such as coal-selecting, mining-selecting, building materials, electrical power and chemical industry, etc. It is composed of base, supporting frame, vibrator, screen, spring, trough, clamp and etc. Especially, supporting frame in twist screen are stressed by high load, mostly it is shock-type loads. Nevertheless, design of base is dependent on experience, and it will cause reliability reduction and cost increase. The supporting plate is composed by the upper plate, the bracket and etc. This research purpose is to propose and verify a method to achieve higher product quality, lower costs, and far less physical testing. In this study, design parameters used for optimization are the upper plate thickness(8㎜, 10㎜, 12㎜) and the bracket thickness(8㎜, 10㎜, 12㎜) in the supporting frame. The result showed that base weight reduced to maximum 25.8% when compared with the current twist screen.
참고문헌 (9)
- 이종신, "고효율 바이브레이팅 스크린 베이스의 최적 설계", 한국기계기술학회지, 14(4), pp.71~77 (2012), 한국기계기술학회
- 조재웅, "불규칙 피로 하중을 받는 자동차의 컨트롤 암의 구조 해석", 한국기계기술학회지, 13(3), pp.87~92 (2011), 한국기계기술학회
- 이종신, "2축 직교좌표 로봇에서 2축 직선 운동 가이드가 로봇의 기계적 성능에 미치는 영향", 한국기계기술학회지, 13(1), pp.95~104 (2011), 한국기계기술학회
- 이종신, "2축 직교좌표 로봇의 성능 향상을 위한 액츄에이터 설계에 관한 연구", 한국기계기술학회지, 12(4), pp.1~10 (2010), 한국기계기술학회
- 이종신, "스카라 로봇의 성능 평가에 의한 제 2 암의 최적 설계", 한국기계기술학회지, 11(2), pp.1~8 (2009), 한국기계기술학회
- 이종신, "스카라 로봇 암의 최적화 설계 및 시뮬레이션", 제어.로봇.시스템학회 논문지, 15(6), pp.612~618 (2009), 제어·로봇·시스템학회
- 현창해, "AutoCAD 2009", pp.11~132 (2009), 기전연구사
- 전재수, "Solidworks Simulation", pp.337~395 (2011), 대영사
- 현창해, "AutoCAD 2009", pp.11~132 (2009), 기전연구사